• 한국추진공학회지
• /
• 제8권1호
• /
• pp.70-80
• /
• 2004

본 연구에서는 한국과 같이 비교적 저 풍속인 지역에 적용 가능하도록 피치제어장치를 가진 1kW급 소형 풍력발전 시스템의 개발 결과를 제시하였다. 공력설계에서는 블레이드의 직경이 동급의 상용 블레이드 보다 과도하게 크지 않으면서도 저 풍속 지역에서 보다 효율적인 형상설계를 위해 여러 가지 설계 변수분석을 통한 파라미터 연구가 수행되었다. 또한 구조설계를 통해 풍력발전기에 작용하는 다양한 하중을 효과적으로 견딜 수 있는 경량의 복합재 구조가 설계되었다. 구조설계의 평가를 위해 유한요소 구조해석이 수행되었으며, 실물 구조시험을 수행하여 구조적 안전성을 확인하였다.

• 한국항공우주학회지
• /
• 제36권4호
• /
• pp.315-320
• /
• 2008

본 논문은 상용유동해석코드인 Fluent를 이용하여 NREL(National Renewable Energy Laboratory) Phase VI 로터에 대한 공력특성을 연구하였다. 해석 결과는 NREL/NASA Ames 풍동 시험결과와 비교하였다. 풍력터빈로터의 반경방향에 대해 속도의 변화에 따른 압력분포를 비교하였다. 계산된 결과는 저속일 때 실험결과와 잘 일치 하였지만 고속일 때 블레이드의 suction side에서 실험결과와 잘 일치하지 않았다. 2기의 풍력터빈간의 거리가 풍력터빈 로터지름의 10배일 때 후류의 영향을 고려한 후방 풍력터빈 로터의 공력해석을 수행하였다.

• 한국항공운항학회지
• /
• 제25권2호
• /
• pp.63-68
• /
• 2017

In the present study, a wind tunnel test for a rotor-blade configuration was conducted to investigate a basic aerodynamic performance and a effect of the cross wind. The diameter of the configuration was 1.46 m and the test was carried out for both a clean and a tripped configurations. The boundary layer for the trip configuration was simulated by zig-zag tape and the test performed on constant-velocity and constant-rotational modes. It was shown that the test result for the tripped configuration reduces the maximum power coefficient by 9.4% ~ 12.1% compared to the clean one. Within $5^{\circ}$ of the flow angle, there is no significant loss of power, however, the coefficient is reduced by 5.3% ~ 36.7% in the range of $10^{\circ}{\sim}30^{\circ}$.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.27-30
• /
• 2009

The aerodynamic performance of aircraft in icing condition can deteriorate considerably by contamination of aerodynamic and propulsive systems due to icing accretions on aircraft surfaces. A computational analysis based on the Eulerian description was performed on an airfoil to investigate effects of ice accretions on airfoil aerodynamics. A water droplet with liquid water concentration ($0.00075kg/m^3$) and mean volume diameter ($20{\mu}m$) was considered and applied to various angles of attack to investigate the stall angle decrease and the drag increment.

• 동력기계공학회지
• /
• 제5권3호
• /
• pp.38-47
• /
• 2001

One stage axial type turbine is designed by mean-line analysis, streamline curvature method and blade design method using shape parameters. Tip and hub diameter of the turbine are 300mm and 206.4mm, respectively. The rotating speed is 1800RPM, and the output power is 1.4kW. The flow coefficient is 1.68 and the reaction factor at mean-line is 0.373. The number of stator and rotor of the turbine are 31 and 41, respectively. Mach number of stator exit flow near hub is 0.164. A test rig is developed for performance test to validate a developed design method. The experimental result shows that the maximum efficiency is obtained on the design point.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.64-70
• /
• 2006

A Computational study was carried out in order to investigate the moving wall effect of a circular cylinder at a Reynolds number of $2.0{\times}10^4$. The viscous-incompressible Navier-Stokes equations and Spalart-Almaras turbulent model of the commercial CFD code were adopted for this numerical analysis. The moving wall was set parallel with the freestream, and moving speed was equal to the freestream velocity. The gap ratio is defined as the distance ratio between the circular cylinder diameter and the height from the moving wall. The results show that there is vortex shedding over the critical gap ratio and aerodynamic loads including amplitude and the Strouhal number change according to the gap ratio.

• 한국대기환경학회지
• /
• 제13권1호
• /
• pp.1-7
• /
• 1997

Anion concentrations and distributions of airborne fine particles less than 2 $\mu$m in urban atmosphere were determined from Feb. 5 to 16, 1996. The sampling was carried out using 8 stages Hering's low pressure impactor (LPI, aerodynamic cutoff diameters are 0.05, 0.075, 0.11, 0.26, 0.50, 1.0, 2.0, and 4.0$\mu$m) on the top of a five-story building located at Kon-Kuk university in Seoul. Average concentrations if C $l^{[-10]}$ , N $O_3$$^{[-10]}$ and S $O_4$$^{2-}$ were 9.4, 8.4, and 14.5 $\mu\textrm{g}$/㎥, respectively. The distributions of these anion concentrations were bimodal types which showed two peaks in the range of 0.075~0.12 ${\mu}{\textrm}{m}$ and 0.5~1 ${\mu}{\textrm}{m}$ in aerodynamic diameter. These results were 2.5~4.7 times higher than anion concentrations collected by Anderson low volume air sampler.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2002년도 추계학술대회 논문집
• /
• pp.358-359
• /
• 2002

Particulate matter smaller than $10{\mu}textrm{m}$ in aerodynamic diameter (PM10) is known as thoracic particles that are capable of reaching the thoracic region of humans. PM10 is further divided into two size ranges, which are fine particles (nuclei mode plus accumulation mode) and coarse particles, based on different sources and chemical composition. Fine particles can penetrate deep into the alveolar region of the human lungs, while coarse particles be deposited in the upper respiratory system. (omitted)

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 1999년도 추계학술대회 논문집
• /
• pp.121-123
• /
• 1999

Bio-Aerosol Concentrator Inlets were made to collect particles of which size was $2\mu\textrm{m}$ as aerodynamic diameter or larger. The Concentrator Inlets were designed by using virtual impactors, because the virtual impactors are known for high efficiency. In a virtual impactor, the intake air is typically divided into two streams with the major and the minor flow. In this work, several types of the acceleration nozzles and collection probes were designed. Subsequently, the results were evaluated experimentally. It was found that if controled properly, the velocity can improve substantially the aerosol concentration performance. The diameter of acceleration nozzle and type of collection probe were varied to obtain the optimum design. Subsequently, the different designs were compared respectively and the best design among them was identified. It is expected that this new finding can help improve design of future Aerosol Concentrator for high concentration rate.

• 대한기계학회논문집
• /
• 제15권6호
• /
• pp.2109-2124
• /
• 1991

본 연구에서는 축류 터빈의 최적 설계 계산에서 사용 용도에 따라 달리 적용 될 수 있는 특정 제한조건, 즉 유량 계수, 압력비, 출력 그리고 하중 계수를 각각 고 려하였을 경우에 최대 효율을 가지기 위한 최적 조건을 계산하고자 한다. 또한 단일 설계 변수의 민감도(sensitivity) 뿐만 아니라, 단일 민감도에서 성능에 큰 영향을 주 는 설계 변수들에 대하여 복수 민감도를 나타내어 설계 변수 및 설계 제한 조건이 축 류 터빈의 성능에 미치는 영향을 조사하고자 한다.