• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1999년도 학술발표대회 논문집 제18권 2호
• /
• pp.427-432
• /
• 1999

When a high-speed train enters a tunnel, a compression wave is generated. This wave subsequently emerges from the exit portal of the tunnel, which causes an impulsive noise called 'Sonic boom' or 'micro-pressure wave'. In the present study, new method is presented for prediction of sonic boom noise, especially focusing on the effect of the nose shape of the train on the resultant noise. Acoustic theory for monopole source is used to represent a nose shape of the train in wave equation. Compression wave propagation in tunnel considering tunnel track condition and emission of sonic boom was calculated. The predicted compression waves and impulsive sound waves are compared with recent measurements, and show reasonable agreements.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 춘계학술대회논문집
• /
• pp.75-80
• /
• 2009

The present paper focuses on the analysis of aero-acoustics characteristic by several boundary conditions. In this simulation, a high-order and high-resolution numerical schemes are used for the accurate computation of compressible flow with several boundary conditions including characteristic boundary conditions as well as extrapolation and zonal characteristic boundary condition. These boundary conditions are applied to the computation of two dimensional circular cylinder flows with Mach number of 0.3 and Reynolds number of 400. The computation results are validated with measurement datum and other computation results for the Strouhal frequency of vortex shedding, the mean drag coefficient and root-mean-square lift for the unsteady periodic flow regime. Secondary frequency is predicted by three kinds of boundary conditions characteristic.

• 한국전산유체공학회지
• /
• 제17권1호
• /
• pp.16-22
• /
• 2012

Acoustic pressure field around the centrifugal fan is predicted by a aero-acoustic splitting method. Unsteady flow field is obtained by solving the incompressible Navier-Stokes equations using commercial code, while the acoustic waves generated inside the centrifugal fan and shroud are predicted by solving the far field acoustics analysis. Computational results show that the acoustic waves of BPF tone are generated by interactions of the blades with the shroud. Acoustic results is validated by experimental results This paper describes the influence of geometric parameters on the noise generation from the section of blades and shroud. One of the effective ways to reduce BPF noise is optimization method using Genetic Algorithm, which effectively minimize eccentricity, is suggested. New improving design was developed by optimization method.

• 한국전산유체공학회지
• /
• 제14권3호
• /
• pp.25-32
• /
• 2009

The present paper focuses on the analysis of aero-acoustics characteristic by appling different four boundary conditions. The high-order and high-resolution numerical schemes are used for discrete accurate computation of compressible flow. The four boundary conditions include extrapolation, characteristic boundary condition, zonal characteristic boundary condition. These boundary conditions are applied to the computation of two dimensional circular cylinder flows with Mach number of 0.3 and Reynolds number of 400. The computation results are validated against measurement data and other computation results for the Strouhal frequency of vortex shedding, the mean drag coefficient and root-mean-square lift for the unsteady periodic flow regime. The characteristics of secondary frequency is predicted by three kinds of boundary conditions.

• 한국전산유체공학회지
• /
• 제20권2호
• /
• pp.61-66
• /
• 2015

In this study, an aero-acoustic analysis around pantograph of a high speed train is performed. Computational technique and grid system is validated with wind tunnel test result and unsteady acoustic pressure data are used for analyzing noise level of each part of pantograph. FLUENT is used for flow analysis and LES(Large Eddy Simulation) is applied for analyzing turbulent flow. For acoustic analysis, Ffowcs Williams-Hawkings(FW-H) acoustics model is used and it bring the aero-acoustic characteristic of pantograph. As the result, contact strip, knee, substructure of pantograph is confirmed as a main source of aero-acoustic noise and it is dealt in various frequencies. The result is expected to help building improved grid system.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 The Fifth Asian Computational Fluid Dynamics Conference
• /
• pp.170-171
• /
• 2003

• 한국음향학회지
• /
• 제41권6호
• /
• pp.713-722
• /
• 2022

본 연구에서는 대상 원심팬 시스템에서 발생하는 유동 현상과 공력 음향 성능을 수치적/실험적으로 분석하고 다양한 수치 기법을 비교하여 평가하고자 하였다. 먼저 원심팬의 성능을 실험적으로 분석하기 위해 반무향실에서 음향 파워를 측정하였으며, 실험 결과를 통해 대상 원심팬 시스템에서 방사되는 소음 성능에 대한 유효 주파수 범위를 파악하고 이에 대한 수치 모사를 실시하였다. 수치적으로 유동 및 음향 파워를 분석하기 위해 Navier-Stokes 방정식과 Ffowcs Williams&Hawkings 방정식을 각각 유동장과 음향장의 지배방정식으로 사용하였으며, 음향장의 구현을 위해 가상의 음향 방사면을 설계하여 사용하였다. 고차 3차원 전산유체역학(Computational Fluid Dynamics, CFD)와 연계된 Hybrid-CAA 기법을 사용하여 모사한 음향 파워 레벨과 소음 실험을 통해 측정한 음향 파워 레벨의 비교를 통해 사용된 수치 기법의 정확도 및 수치적 특성을 평가하였다.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 2004년도 춘계학술발표대회 논문집 제23권 1호
• /
• pp.301-306
• /
• 2004

자동차의 경음기는 보행자나 다른 차량에게 경고를 보내기 위해 필요한 장치로 너무 작은 소리를 내는 경우에는 경고를 전달할 수 없는 문제점이 생기고, 너무 큰 소리를 내는 경우에는 소음피해를 주게 된다. 경음기의 소리 크기 뿐만 아니라 음색 또한 무시할 수 없는 중요한 인자라 할 수 있는데 이것은 경고음에 대한 사람의 반응에 영향을 줄 뿐만 아니라 자동차에 대한 고객들의 감성적인 평가에 영향을 미치기 때문이다. 본 연구에서는 자동차용 디스크 타입 경음기의 특징을 이해하기 위해 진동 및 음향특성에 관한 실험을 수행하였고, 이를 기반으로 전자기적, 기계적인 힘의 상호관계를 바탕으로 FEM, BEM 등의 방법으로 해석하였으며, 경음기의 소음 진동 특성을 시뮬레이션하였다. 이를 바탕으로 경음기의 형상 인자와 경음기의 소음 특성간의 관계를 해석하여 진동판과 방사판의 형상에 따른 주파수 특성관계를 도출하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.762-767
• /
• 2001

LES formulation was applied to simulate the flow fields around rotating fan blades tested by DLR. The turbulent flows around fan blade rotating with 500 RPM were simulated and the far-field noise was exactly computed by using the Focus Williams and Hawkings equation with an inclusion of quadrapole source formulation. The dipole noise computed at the far-field by predicted drag and lift forces at steady state was in good agreement with experimental data and the dipole source was also found to be the major factor than other sound sources from unsteady calculation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.768-773
• /
• 2001

The self-noise from blade cascade at off-design points mainly comes from separated boundary layer and vortex sheddings, and is also dependent on blade shape. If the incidence angle to the cascade increases, the stalling in blades may occur and the noise level increases significantly. The hybrid method using acoustic analogy was employed to compute the far-field noise spectra and directivity patterns from the separated vortex shedding at off-design points of the cascade of impeller. This paper is compared with the experimental data of a stationary cascade in the same conditions. The simulated result is in excellent .agreement with the measured data except th slight under-prediction near the maximum radiation angle for a dipole sound.