• The Journal of the Korean dental association
• /
• v.58 no.10
• /
• pp.640-648
• /
• 2020

The aim of this article is to provide major announcements within the last decade or so about possible medical emergencies in dentistry. This would be helpful to improve the knowledge on first aid suitable for dental environment. Syncope was the most common medical emergencies in dentistry. Medical emergency situations can be divided into urgency and true emergency. Urgency situations can be solved well if proper treatment is taken. However, even in an urgency, if the correct treatment is not performed, it may soon turn into an emergency. With the joint efforts of the Korean Dental Anesthesiology Society and the Korean Cardiopulmonary Resuscitation Association, dental advanced life support (DALS) has been prepared since 2015. Through 17 training experiences until January 2020, scenarios and textbooks were developed. Dentists and dental care teams need to be prepared to strengthen their competence as professionals and to increase their team-level response capabilities..

• Fibers and Polymers
• /
• v.4 no.2
• /
• pp.84-88
• /
• 2003

The properties of a woven fabric made of poly(trimethylene terephthalate) (PTT) were investigated. The PTT fab-ric of draw textured yarn (DTY) showed excellent stretch as good as a fabric containing spandex. However, the unique stretch of the PTT fabric reduced dramatically by simple heat-treatment even at as low as $80^{\circ}C$. To understand the phenomenon, the crimp rigidity of the DTY was observed by SEM. It was found that the drastic reduction of stretch was caused by irreversible uncrimping of PTT DTY after heat-treatment. Conclusively, it is of importance to optimize the texturing conditions for PTT DTY to make the crimp more stable.

• Membrane Journal
• /
• v.27 no.5
• /
• pp.375-388
• /
• 2017

Wastewater treatment (WWT) technology has been developing from simple pollutant treatment to energy and resource-saving advanced technology, and various technologies combined with IT and BT are developed to minimize the amount of pollutant and toxic substance discharge to the public water areas and to improve operational efficiency. To examine the development trend of domestic wastewater treatment technology, the registered patent technologies were surveyed, classified and analyzed by year and sector. This paper considers the status of patent registration related to WWT from 2010.1 to 2017.5 in terms of the number of specific technical areas, and the trends are analyzed based on the 10 categorization field such as biological and physicochemical treatment process, equipment and device, material, sludge treatment, membrane, process control and 42 specific technical areas. A total of 3,356 patents have been registered since 2010, and the number of patents has been decreasing since the peak at 2013 and maintains 3~400 per year. The total number of patents has not yet been less than other countries, but the number of patents of more advanced technologies, which can lead the global market, such as process monitoring, new concept processing and equipment technologies is still insufficient compared to developed countries.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.16
• /
• pp.7309-7313
• /
• 2015

Background: The organ preservation approach of choice for the treatment of locally advanced head and neck cancers is concurrent chemoradiation with three weekly high doses of cisplatin. Although this is an efficacious treatment policy, it has high acute systemic and mucosal toxicities, which lead to frequent treatment breaks and increased overall treatment time. Hence, the current study was undertaken to evaluate the efficacy of concurrent chemoradiation using 40 mg/m2 weekly cisplatin. Materials and Methods: This is a single institutional retrospective study including the data of 266 locally advanced head and neck cancer patients who were treated with concurrent chemoradiation using 40 mg/m2 weekly cisplatin from January 2012 to January 2014. A p-value of < 0.05 was taken to be significant statistically for all purposes in the study. Results: The mean age of the study patients was 48.8 years. Some 36.1% of the patients had oral cavity primary tumors. The mean overall treatment time was 57.2 days. With a mean follow up of 15.2 months for all study patients and 17.5 months for survivors, 3 year local control, locoregional control and disease free survival were seen in 62.8%, 42.8% and 42.1% of the study patients. Primary tumor site, nodal stage of disease, AJCC stage of the disease and number of cycles of weekly cisplatin demonstrated statistically significant correlations with 3 year local control, locoregional control and disease free survival. Conclusions: Concurrent chemoradiotherapy with moderate dose weekly cisplatin is an efficacious treatment regime for locally advanced head and neck cancers with tolerable toxicity which can be used in developing countries with limited resources.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.10
• /
• pp.4055-4068
• /
• 2010

In this study, validity of wastewater treatment system with advanced treatment processes was evaluated by studying its operational conditions by applying the advanced treatment to the wastewater treatment system which was operating for last several years. Study indicated a fair result for the removal efficiencies of BOD, T-P, and T-N for each unit operation. BOD removal efficiencies for primary clarifier, bioreactor, final effluent are 35, 87, and 48 % respectively. T-P(T-N) removal efficiencies for primary clarifier, bioreactor, final effluent are 18(23), 40(38), and 25(25) % respectively. Further investigation of bioreactor showed that various microorganism such as bacteria, protozoa, and metazoa is present in the bioreactor, and the main function of the media, adhesion (adsorption) of microorganism onto the media, is stabilized. Final effluent quality was lower than the regulation, and BOD, COD, SS, T-N, T-P were 5.5, 9.9, 4.6, 11.8, 0.99 mg/L respectively.

• Journal of the Korean Society for Heat Treatment
• /
• v.21 no.1
• /
• pp.10-19
• /
• 2008

To investigate the effect of ultrasonic nano-crystalline surface modification (UNSM) treatment on rolling contact fatigue and residual stress properties of bearing steels, this paper carried out a rolling contact fatigue test, measured residual stress and retained austenite, performed a wear test, observed microstructure, measured micro hardness, and analyzed surface topology. After the UNSM treatment, it was found that the surface became minute by over $100{\mu}m$. The micro surface hardness was changed from Hv730~740 of base material to Hv850~880 with about 20% improvement, and hardening depth was about 1.3 mm. The compressive residual stress was measured as high as -700~-900 MPa, and the quantity of retained austenite was reduced to 27% from 34%. The polymet RCF-6 ball type rolling contact fatigue test showed over 4 times longer fatigue lifetime after the UNSM treatment under 551 kgf load and 8,000 rpm. In addition, this paper observed the samples, which went through the rolling contact fatigue test, with OM and SEM, and it was found that the samples had a spalling phenomenon (the race way is decentralized) after the UNSM treatment. However, before the treatment, the samples had excessive spalling and complete exploration. Comparison of the test samples before and after the UNSM treatment showed a big difference in the fatigue lifetime, which seems to result from the complicated effects of micro particles, compressive residual stress, retained austenite, and surface topology.

• 한국초전도학회:학술대회논문집
• /
• 2007.07a
• /
• pp.73-73
• /
• 2007

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.90-95
• /
• 2008

We studied the effect of thermal annealing and hydrofluoric (HF) acid treatment on the field emission properties of carbon nanotube field emitter arrays (CNT-FEAs) grown with the resist-assisted patterning (RAP) process. After thermal and HF treatment, it was observed that the electron emission properties were remarkably improved. The enhanced electron emission was also found to depend strongly on the sequence of the treatments; the electronemission current density is 656 $mA/cm^2$ with the process of thermal treatment prior to HF treatment while the current density is reduced by 426 $mA/cm^2$ with the reversal processes. This is due to the increased crystalline structure by thermal annealing and then strong fluorine bond was formed by HF treatment.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.4
• /
• pp.419-424
• /
• 2007

According to increase of consumer's desire for clean tap water, advanced treatment processes include with membrane, ozone, and granular activated carbon(GAC) were introduced. In order to evaluate the effect of advanced treatment processes for residual chlorine decay and trihalomethane(THM) formation in water distribution system, dissolved organic matter(DOC) removal of each advanced treatment process was investigated. The residual chlorine decay and THM formation using bottle tests were also evaluated. $UV_{254}$ removal in all advanced treatment was better than DOC removal. Especially, DOC by ozone treated was removed as 4% in contrast with sand filtered water, but $UV_{254}$ was removed about 17%. This result might be due to convert from hydrophobic DOC to hydrophilic DOC by ozonation. Ozone/GAC process was most effective process for DOC removal. The residual chlorine decay constants in treated water by sand filtration, ozonation, GAC adsorption, and ozone/GAC processes were 0.0230, 0.0307, 0.0117 and 0.0098 $hr^{-1}$, respectively. The sand filtered water was produced 81.8 ${\mu}g/L$ of THM after 190 hours of reaction time, as the treated water by ozone, GAC, and Ozone/GAC was less produced 6.0, 26.2, 30.3% in contrast with sand filtered water, respectively. Consequently, the durability of residual chlorine and reduction of THM formation were improved by advanced treatment processes.

• Journal of Animal Science and Technology
• /
• v.47 no.1
• /
• pp.57-72
• /
• 2005

The present study was undertaken to investigate the effects of nutrient density diets and sex on carcass and pork quality characteristics in finishing pigs. A total of 96 pigs(58.04 $\pm$ 6.85 kg) were divided into 2 groups(gilts and barrows), each sex group was assigned to 3 nutrient density(high : 18.5%, middle : 16.0% and low: 14.0% CP, respectively) and raised up to 1l0kg live weight. Each treatment had four replicates with three or five pigs per replicate. The treatments comprised the feeding regimes of 1) the low density diet for 60 days, 2) the middle nutrient density diet for the 30 days followed by a low nutrient density diet for the remaining 30 days and 3) the high nutrient density diet for the 30 days followed by a middle nutrient density diet for the remaining 30 days. Pigs were conventionally slaughtered, and then chilled overnight. Carcass characteristics and grades were determined on those carcasses, and pork loin muscle was removed from each left side at 5th to 13th rib for quality evaluation were evaluated. There were no differences in the carcass weight between sex and nutrient density. Dressing percent of L-L(gilts) treatment was significantly higher than that of other treatments(P< 0.05). Barrows showed a thicker back fat thickness than gilts. There were no difference in intramuscular fat, subcutaneous fat and springiness between sex and nutrient density. Intermuscular fat of barrows groups was significantly higher than the gilts groups(P < 0.05). In the meat quality characteristics, there were no difference in general composition, meat and fat color between sex and nutrient density. pH of L-L(gilts) treatment was significantly higher than that of other treatments(P < 0.05). Cooking loss and shear force value of H-M(barrows) treatment were significantly higher than those of other treatments(P< 0.05). Purge loss of barrows groups was significantly higher than the gilts groups(P < 0.05). Myoglobin content of H-M treatment was significantly lower than L-L and M-L treatments(P< 0.05). Texture of H-M treatment was higher than L-L and M-L treatments. The content of myristic, palmitic, palmitoleic and oleic acid were significantly higher in the barrows groups(P< 0.05). However, stearic, linoleic and arachidonic acid were significantly higher in the gilts(P < 0.05). Amino acid content of L-L treatment was significantly higher than M-L and H-M treatments(P < 0.05). In conclusion, carcass and pork quality characteristics were affected by sex and nutrient density.