• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.293-305
• /
• 2015

In this paper, we suggest the conceptual design of a water-cooled reactor system for a low-pressure inherent heat sink nuclear desalination plant (LIND) that applies the safety-related design concepts of high temperature gas-cooled reactors to a water-cooled reactor for inherent and passive safety features. Through a scoping analysis, we found that the current LIND design satisfied several essential thermal-hydraulic and neutronic design requirements. In a thermal-hydraulic analysis using an analytical method based on the Wooton-Epstein correlation, we checked the possibility of safely removing decay heat through the steel containment even if all the active safety systems failed. In a neutronic analysis using the Monte Carlo N-particle transport code, we estimated a cycle length of approximately 6 years under 200 $MW_{th}$ and 4.5% enrichment. The very long cycle length and simple safety features minimize the burdens from the operation, maintenance, and spent-fuel management, with a positive impact on the economic feasibility. Finally, because a nuclear reactor should not be directly coupled to a desalination system to prevent the leakage of radioactive material into the desalinated water, three types of intermediate systems were studied: a steam producing system, a hot water system, and an organic Rankine cycle system.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1997년도 춘계학술발표회논문집(1)
• /
• pp.21-26
• /
• 1997

Recently, thorium is receiving increasing attention as an important fertile material for the expanding nuclear power programs around the world. The superior nuclear and physical properties of thorium-based fuels could lead to very low fuel cycle cost and make thorium reactors economically attractive. In addition, the use of thorium in reactors would permit more efficient utilization of low cost uranium reserves and reduction nuclear wastes. In this work, the nuclear characteristics of a new type thorium fueled reactor (Radkowsky Thorium Reactor) consisting seed-blanket assemblies are addressed and compared with those typical assemblies of a PWR (CE type). Also, an assessment on several advantages of thorium fueled reactors is provided. All these results are based on the HELIOS code calculation.

• Nuclear Engineering and Technology
• /
• 제41권4호
• /
• pp.427-446
• /
• 2009

In order to meet the increasing demand for electricity, Korea has to rely on nuclear energy due to its poor natural resources. In order for nuclear energy to be expanded in its utilization, issues with uranium supply and waste management issues have to be addressed. Fast reactor system is one of the most promising options for electricity generation with its efficient utilization of uranium resources and reduction of radioactive waste, thus contributing to sustainable development. The Korea Atomic Energy Research Institute (KAERI) has been performing R&Ds on Sodium-cooled Fast Reactors (SFRs) under the national nuclear R&D program. Based on the experiences gained from the development of KALIMER conceptual designs of a pool-type U-TRU-10%Zr metal fuel loaded reactor, KAERI is currently developing Advanced SFR design concepts that can better meet the Generation IV technology goals. This also includes developing, Advanced SFR technologies necessary for its commercialization and basic key technologies, aiming at the conceptual design of an Advanced SFR by 2011. KAERI is making R&D efforts to develop advanced design concepts including a passive decay heat removal system and a supercritical $CO_2$ Brayton cycle energy conversion system, as well as developing design methodologies, computational tools, and sodium technology. The long-term Advanced SFR development plan will be carried out toward the construction of an Advanced SFR demonstration plant by 2028.

• Nuclear Engineering and Technology
• /
• 제47권7호
• /
• pp.849-858
• /
• 2015

This study set the pyroprocess facility at an engineering scale as a cost object, and presented the cost consumed during the unit processes of the pyroprocess. For the cost calculation, the activity based costing (ABC) method was used instead of the engineering cost estimation method, which calculates the cost based on the conceptual design of the pyroprocess facility. The calculation results demonstrate that the pyroprocess facility's unit process cost is $194/kgHM for pretreatment, $298/kgHM for electrochemical reduction, $226/kgHM for electrorefining, and $299/kgHM for electrowinning. An analysis demonstrated that the share of each unit process cost among the total pyroprocess cost is as follows: 19% for pretreatment, 29% for electrochemical reduction, 22% for electrorefining, and 30% for electrowinning. The total unit cost of the pyroprocess was calculated at $1,017/kgHM. In the end, electrochemical reduction and the electrowinning process took up most of the cost, and the individual costs for these two processes was found to be similar. This is because significant raw material cost is required for the electrochemical reduction process, which uses platinum as an anode electrode. In addition, significant raw material costs are required, such as for $Li_3PO_4$, which is used a lot during the salt purification process.

• 방사성폐기물학회지
• /
• 제5권4호
• /
• pp.339-350
• /
• 2007

전세계 주요 원자력선진국들의 사용후핵연료 처리에 대한 기술 및 정책현황을 알아보고 향후 우리나라의 연구방향을 제시해 보았다. 재처리 정책을 가진 소위 핵연료주기 국가들은 최근 선진핵 연료주기기술에 기초한 새로운 사용후핵 연료 관리정책을 발표하였다. 그 정책은 사용후핵연료 내에 함유된 우라늄 또는 초우란 원소들을 재순환하고 고독성의 방사성 물질 및 장반감기를 가진 물질들을 소멸하거나 단반감기 원소로 변환하는데 초점을 맞추고 있다. 이러한 정책은 원자력의 자원 활용성을 높일 뿐만 아니라, 영구 처분할 고준위폐기물의 양을 감소시켜 궁극적으로 원자력의 지속가능성을 높여 준다. PUREX 방법에 기초한 습식재처리를 우선순위로 선택한 대부분의 국가들은 이 습식방법이 건식방법에 비해 실용화에 앞서 있음을 그 선택 의 근거로 든다. 그러나 습식방법은 건식에 비해 핵확산저항성 측면에서 더욱 민감하다. 왜냐하면 이 습식방법은 약간의 공정수정에 의해 순수 플루토늄을 회수 할 수 있기 때문이다. 반면에 아직까지 실용화 단계까지는 도달해 있지 않지만 고온 용융염을 사용하는 Pyroprocess와 같은 건식처리 방법은 순수한 플루토늄을 회수 할 수 없어서 핵비확산성 측면에서 유리하며, 제4세대 원자로로 고려되는 고속로의 핵연료주기 등에도 여러 가지 이점을 가지고 있다. 따라서 우리나라의 경우 현재 이 Pyroprocess에 대한 연구가 활발히 진행되고 있다.

• 사물인터넷융복합논문지
• /
• 제6권1호
• /
• pp.1-8
• /
• 2020

미국의 고급 연료 사이클 이니셔티브 (AFCI) 추진에 이어, 동적 연료 시뮬레이션을 사용하여 글로벌 연료 사이클 이니셔티브 (GFCI)에 대한 분석 제안이 조사되었다. 정치적, 경제적 측면은 핵물질의 특정 특성으로 인해 동시에 고려된다. 미국의 고급 연료 사이클 이니셔티브 (AFCI) 추진에 이어, 동적 연료 시뮬레이션을 사용하여 글로벌 연료 사이클 이니셔티브 (GFCI)에 대한 분석 제안이 조사되었다. 정치적, 경제적 측면은 핵물질의 특정 특성으로 인해 동시에 고려된다. 사용된 핵연료의 미국의 고급 연료 사이클 이니셔티브 (AFCI) 추진에 이어, 동적 연료 시뮬레이션을 사용하여 글로벌 연료 사이클 이니셔티브 (GFCI)에 대한 분석 제안이 조사되었다. 정치적, 경제적 측면은 핵 물질의 특정 특성으로 인해 동시에 고려된다. 사용된 핵연료 (SNF)는 핵 확산 금지 조약 (NPT) 면제 국가와 NPT 제외 국가에 의해 재처리로 처리된다. 그렇지 않으면, 열처리 및 저장소는 NPT 제한 없이 수행 될 수 있다. 또한 국제 무역은 에너지 생산이 GFCI의 주요 이슈인 경제적 측면으로 간주된다. 동적인 시뮬레이션은 2050 년까지 이루어졌다. 국제 무역의 결과는 점차적으로 증가하는 모습을 보여준다. 또한 원자력 발전소 운영은 단계적으로 증가하고 있음을 보여준다.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.369-376
• /
• 2019

A complete solution for a soluble-boron-free (SBF) small modular reactor (SMR) is pursued with a new burnable absorber concept, namely centrally-shielded burnable absorber (CSBA). Neutronic flexibility of the CSBA design has been discussed with fuel assembly (FA) analyses. Major design parameters and goals of the SBF SMR are discussed in view of the reactor core design and three CSBA designs are introduced to achieve both a very low burnup reactivity swing (BRS) and minimal residual reactivity of the CSBA. It is demonstrated that the core achieves a long cycle length (~37 months) and high burnup (~30 GWd/tU), while the BRS is only about 1100 pcm and the radial power distribution is rather flat. This research also introduces a supplementary reactivity control mechanism using stainless steel as mechanical shim (MS) rod to obtain the criticality during normal operation. A further analysis is performed to investigate the local power peaking of the CSBA-loaded FA at MS-rodded condition. Moreover, a simple $B_4C$-based control rod arrangement is proposed to assure a sufficient shutdown margin even at the cold-zero-power condition. All calculations in this neutronic-thermal hydraulic coupled investigation of the 3D SBF SMR core are completed by a two-step Monte Carlo-diffusion hybrid methodology.

• 한국에너지공학회:학술대회논문집
• /
• 한국에너지공학회 1998년도 춘계 학술발표회 논문집
• /
• pp.235-242
• /
• 1998

Aiming at one of decisive alternatives for long term aspect of nuclear power concerns, an integral and closed nuclear system, AMBIDEXTER (Advanced Molten-salt Break-even Inherently-safe Dual-mission Experimental and TEst Reactor) concept is under development. The AMBIDEXTER complex essentially comprises two mutually independent loops of the radiation/material transport and the heat/energy conversion, centered at the integrated reactor assembly, which enables one to utilize maximum benefits of nuclear energy under minimum risks of nuclear radiation. And it provides precious radioisotopes and radiation sources from its waste stream. Also the reactor operates at very low level of fission products inventory throughout its lifetime. The nuclear and thermalhydraulic characteristics of the molten TH/$^{233}$ U fuel salt extend the capability of the self-sustaining AMBIDEXTER fuel cycle to enhance resource security and safeguard transparency. The reactor system is consisted of a single component module of the core, heat exchangers and recirculation pumps with neither pipe connections nor active valves in between, which will significantly improve inherent features of nuclear safety. States of the core technologies associated with designing and developing the AMBIDEXTER concept are mostly available in commercialized form and thus demonstration of integral aspects of the concept should be the prime area in future R＆D programs.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.644-652
• /
• 2022

During the pyroprocessing operation, various signals can be collected by process monitoring (PM). These signals are utilized to diagnose process states. In this study, feasibility of using PM for nuclear safeguards of electrorefining operation was examined based on the use of machine learning for detecting off-normal operations. The off-normal operation, in this study, is defined as co-deposition of key elements through reduction on cathode. The monitored process signal selected for PM was cathode potential. The necessary data were produced through electrodeposition experiments in a laboratory molten salt system. Model-based cathodic surface area data were also generated and used to support model development. Computer models for classification were developed using a series of recurrent neural network architectures. The concept of transfer learning was also employed by combining pre-training and fine-tuning to minimize data requirement for training. The resulting models were found to classify the normal and the off-normal operation states with a 95% accuracy. With the availability of more process data, the approach is expected to have higher reliability.

• Nuclear Engineering and Technology
• /
• 제18권2호
• /
• pp.78-84
• /
• 1986

일차섭동이론을 이용하여 물질밀도 감도 계수의 표현식을 유도하였다. Super-Phenix I 평형노심의 초기상태를 기준계로 택했으며 유효중배계수를 계의 응답함수로 정의했다. 볼츠만 연산자의 구성요 소인 물질밀도로 표현되는 핵연료의 농축도와 실효밀도를 입력변화로 선정했다. 위 계산을 수행하는데 전산코드시스템 (KAERI-26군 단면적 library/1DX/2DB/PERT-V)가 사용되었다. 핵연료 농축도의 유효증배계수에 대한 감도계수는 4.576로 계산되었으며, 핵연료 실효밀도의 감도 계수는 0.0756으로 계산되었다. 본 연구는 감도해석법이 대형전산코드를 이용한 직접반복계산법에 비해 계산시간의 단축과 아울러 많은 정보를 준다는 것을 보여준다.