• 한국치위생학회지
• /
• 제21권4호
• /
• pp.413-425
• /
• 2021

Objectives: This study aimed to provide basic data to lay the groundwork for the introduction of an advanced dental hygienist system by sampling dental hygienists' views about the system. Methods: A nationwide questionnaire survey was conducted targeting 857 dental hygienists working at dental hospitals and clinics, local health institutions, and educational institutions. The collected data were analyzed using frequency analysis, t-test, one-way analysis of variance (ANOVA) (Duncan as post-analysis), and crossover analysis. Results: The average interest level in the advanced dental hygienist system was 3.83±0.95 points. The necessity by field was confirmed to be the highest during dental hygiene for the elderly and persons with disabilities. The working experience necessary for becoming a specialized dental hygienist is 5.56±2.99 (years). The education period necessary for becoming a specialized dental hygienist is 77.30±77.61 (hours). The work authority level for an advanced dental hygienist was indicated to be 50 respondents (5.8%), who said they required direct guidance from a dentist, 313 respondents (48.2%) who said they needed indirect guidance from a dentist, 200 respondents (23.3%) who said OK when given an advanced dental hygienist's separate judgment, 194 respondents (22.6%), who said that the authority must be varied depending on the work. Conclusions: The interest and need of the advanced dental hygienist system were proven to be high and are expected to be applied to basic data for the introduction and settlement of the system.

• Bulletin of the Korean Chemical Society
• /
• 제33권9호
• /
• pp.2851-2852
• /
• 2012

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2525-2526
• /
• 2011

• Rapid Communication in Photoscience
• /
• 제1권2호
• /
• pp.64-64
• /
• 2012

• 한국염색가공학회:학술대회논문집
• /
• 한국염색가공학회 2011년도 제44차 학술발표회
• /
• pp.70-70
• /
• 2011

최근 산업 발달에 의한 환경문제와 석유자원 감소에 따라 섬유시장에는 Eco-friendly 바람이 강하게 불고 있으며 리싸이클 제품이 급부상하고 있다. 폴리에스터계 고분자 제품, 그 중에서도 PET 병의 재자원화를 살펴보면 기계적, 열적으로 처리하여 물질을 바꾸지 않고서 회수하는 방법인 Mechanical Recycling과 원료를 분해하여 회수하는 방법인 Chemical Recycling이 있다. 이러한 리싸이클을 통하여 에너지 절감, 저탄소, 유해물질 감소, 환경정화 및 폐기물 감소로 환경부하가 완화되며, 자원의 효율적 재사용이 가능하다. 리싸이클 PET 섬유제품은 의류 인테리어용과 같은 한정된 용도뿐만 아니라 자동차용 부품소재 및 내장 부품 등 산업용으로도 사용가능하다. 본 연구에서는 리싸이클 PET로 제직한 직물에 정련과 호발가공을 하여 이러한 전처리에 따른 물리적 열적 특성의 변화를 비교 분석하였다. 그 결과 정련과 호발가공을 한 리싸이클 PET 직물의 인장 인열 강도가 미처리 직물과 비교하여 감소하는 결과를 보였으며 마모 파열강도는 큰 차이를 보이지 않았다. 반면에 TGA와 DSC를 이용한 열분석 결과 열적 특성 및 결정화도는 일부 차이를 나타내었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권2호
• /
• pp.126-131
• /
• 2007

In this paper, Monte Carlo Simulation (MCS) method was used as an uncertainty assessment tool for air flow, net thrust measurement. Uuncertainty sources of the net thrust measurement were analyzed, and the probability distribution characteristics of each source were discussed. Detailed MCS methodology was described including the effect of the number of simulation. Compared to the conventional sensitivity coefficient method, the MCS method has advantage in the uncertainty assessment. The MCS is comparatively simple, convenient and accurate, especially for complex or nonlinear measurement modeling equations. The uncertainty assessment result by MCS was compared with that of the conventional sensitivity coefficient method, and each method gave different result. The uncertainties in the net thrust measurement by the MCS and the conventional sensitivity coefficient method were 0.906% and 1.209%, respectively. It was concluded that the first order Taylor expansion in the conventional sensitivity coefficient method and the nonlinearity of model equation caused the difference. It was noted that the uncertainty assessment method should be selected carefully according to the mathematical characteristics of the model equation of the measurement.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권2호
• /
• pp.69-79
• /
• 2010

This paper describes the experimental framework for the control system design and validation of a rotorcraft unmanned aerial vehicle (UAV). Our approach follows the general procedure of nonlinear modeling, linear controller design, nonlinear simulation and flight test but uses an indoor-installed multi-camera system, which can provide full 6-degree of freedom (DOF) navigation information with high accuracy, to overcome the limitation of an outdoor flight experiment. In addition, a 3-DOF flying mill is used for the performance validation of the attitude control, which considers the characteristics of the multi-rotor type rotorcraft UAV. Our framework is applied to the design and mathematical modeling of the control system for a quad-rotor UAV, which was selected as the test-bed vehicle, and the controller design using the classical proportional-integral-derivative control method is explained. The experimental results showed that the proposed approach can be viewed as a successful tool in developing the controller of new rotorcraft UAVs with reduced cost and time.

• Carbon letters
• /
• 제16권3호
• /
• pp.203-210
• /
• 2015

This study fabricated low thermal conductive polyacrylonitrile (PAN)-based carbon fibers containing cellulose particles while maintaining their mechanical properties. The high thermal conductivity of carbon fibers limits their application as a high temperature insulator in various systems such as an insulator for propulsion parts in aerospace or missile systems. By controlling process parameters such as the heat treatment temperature of the cellulose particles and the amount of cellulose added, the thermal and mechanical properties of the PAN-based carbon fibers were investigated. The results show that it is possible to manufacture composite carbon fibers with low thermal conductivity. That is, thermal conductivities were reduced by the cellulose particles in the PAN based carbon fibers while at the same time, the tensile strength loss was minimized, and the tensile modulus increased.

• Nuclear Engineering and Technology
• /
• 제47권3호
• /
• pp.293-305
• /
• 2015

In this paper, we suggest the conceptual design of a water-cooled reactor system for a low-pressure inherent heat sink nuclear desalination plant (LIND) that applies the safety-related design concepts of high temperature gas-cooled reactors to a water-cooled reactor for inherent and passive safety features. Through a scoping analysis, we found that the current LIND design satisfied several essential thermal-hydraulic and neutronic design requirements. In a thermal-hydraulic analysis using an analytical method based on the Wooton-Epstein correlation, we checked the possibility of safely removing decay heat through the steel containment even if all the active safety systems failed. In a neutronic analysis using the Monte Carlo N-particle transport code, we estimated a cycle length of approximately 6 years under 200 $MW_{th}$ and 4.5% enrichment. The very long cycle length and simple safety features minimize the burdens from the operation, maintenance, and spent-fuel management, with a positive impact on the economic feasibility. Finally, because a nuclear reactor should not be directly coupled to a desalination system to prevent the leakage of radioactive material into the desalinated water, three types of intermediate systems were studied: a steam producing system, a hot water system, and an organic Rankine cycle system.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2007년도 학술발표회 논문집
• /
• pp.447-448
• /
• 2007