• Korean Chemical Engineering Research
• /
• 제56권1호
• /
• pp.112-118
• /
• 2018

제올라이트에 대한 수용액으로부터 brilliant green의 흡착 평형과 동역학 및 열역학 파라미터들을 다양한 초기농도(10-30 mg/L), 접촉시간(1-24 h) 및 흡착온도(298-318 K)를 변수로 하여 회분식 실험을 통하여 연구하였다. 흡착평형 값들은 Langmuir, Freundlich 및 Dubinin-Radushkevich 식으로 해석하였다. 그 결과는 Langmuir 식과 Freundlich 식에 잘 맞았으며, 평가된 Langmuir 무차원 분리계수 값($R_L=0.041{\sim}0.057$)와 Freundlich 상수값(1/n=0.30~0.47)은 제올라이트에 의한 brilliant green의 흡착이 효과적인 공정이 될 수 있음을 나타냈다. Dubinin-Radushkevich 식에 의해 평가된 흡착 에너지값(1.564~1.857 kJ/mol)은 물리흡착에 해당하였다. Brilliant green의 흡착 동력학은 유사이차반응속도식에 잘 맞았으며, 입자내 확산식에 잘 따랐다. 흡착 특성을 평가하기 위하여 주로 활성화에너지, Gibbs 자유에너지, 엔탈피 및 엔트로피와 같은 열역학 파라미터가 계산되었다. Gibbs 자유에너지-10.3~-11.4 kJ/mol), 엔탈피(49.48 kJ/mol) 및 활성화에너지(27.05 kJ/mol)는 흡착이 자발적이고, 흡열 및 물리흡착 공정임을 나타냈다.

• 대한환경공학회지
• /
• 제34권4호
• /
• pp.260-269
• /
• 2012

본 연구는 흡착과정의 열역학적 특성을 이해하는데 이용되는 각종 흡착모델의 적용성을 평가하는데 목적이 있다. 이를 위해 다양한 실험조건(상이한 흡착질 초기농도, 흡착제 투여량, 온도)에서 구한 질산성 질소에 대한 상용 음이온교환수지의 흡착등온자료를 열역학 상수 및 흡착에너지 평가에 이용하였다. 흡착과정의 Gibbs의 자유에너지(${\Delta}G^0$)는 비록 실험조건에 따라 그 값이 달라지지만 Langmuir 상수 또는 Ships 상수, $b_M$를 이용하여 계산할 수 있었다. Gibbs의 자유에너지(${\Delta}G^0$)는 물론 표준 엔탈피(${\Delta}H^0$), 표준 엔트로피(${\Delta}S^0$)와 같은 열역학적 상수들은 다른 온도조건에서 얻은 흡착실험자료를 이용하여 계산할 수 있다. 다만 이를 위해서는 실험자료가 Langmuir 등온식을 따라야 하고 각 반응온도에서 산출한 Langmuir 상수($lnb_M$)와 반응온도(1/T)의 관계가 직선으로 수렴되어야 한다. 이를 만족하지 못할 경우 Langmuir상수 대신 흡착평형상태에서 $q_e/C_e$로 정의되는 실험적 평형상수(K)를 이용한 열역학적 상수의 평가는 매우 유용한 대안이 될 수 있다. 다양한 조건에서 얻은 흡착실험 결과들을 D-R모델과 Temkin모델에 적용하여 흡착에너지를 평가한 결과, D-R 등온식이 Temkin 등온식에 비해 적용성이 높았으며, Temkin 모델의 경우 실험조건에 따라 그 적용성이 크게 제한됨을 알 수 있었다. D-R 등온식으로부터 얻은 흡착에너지는 실험조건에 따라 상당히 다른 값을 나타내었지만 흡착반응이 흡열반응이고 이온교환반응임을 증명하는데 충분하였다.

• 한국물환경학회지
• /
• 제21권5호
• /
• pp.505-510
• /
• 2005

The objective of this study was to remove non-biodegradable matters and ammonia ion in livestock wastewater using Fenton oxidation and Zeolite adsorption process. After coagulation process as 1st treatment, non-biodegradable matters remained after 1st treatment were removed by using OH radical produced in Fenton oxidation process. Zeolite as cation adsoption process was used to remove ammonia ion in 2nd treatment water. As a result of treatment using these processes, NBDCOD removal efficiency was over 90% and ammonia ion was almost removed. Most aromatics or polynuclear aromatics like benzene, phenol and scatol in livestock wastewater wasn't detected after Fenton oxidation process.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.384-387
• /
• 2008

We have studied the adsorption of contaminations on the MgO protective layer by Thermal Desorption Spectrometry (TDS). The result shows that the increase in exposure time, MgO thickness and humidity multiply the quantity of adsorbed contaminations. It is also found that the desorption activation energy and contamination quantity is decreased by the additional firing process of MgO layer under oxygen environment.

• 한국염색가공학회지
• /
• 제4권4호
• /
• pp.97-103
• /
• 1992

For manufacturing a high sorptive ACF, we used orthognal array experimental design to get optimum condition. The ability of ACF was measured by $CCl_4$ adsorption and showed those manufacturing conditions were effective in the order of treatment time>oxidative gas>treatment temperature. The optimal condition presented the maximum adsorption rate was at 90$0^{\circ}C$ for 6 minutes with $CO_2$/$H_2O$ gas in the PAN based ACF manufacturing process. The adsorption rate of developed ACF in this experiment was over 100%.

• 한국환경과학회지
• /
• 제8권2호
• /
• pp.205-209
• /
• 1999

Iron hydroxides are good adsorbents for uncomplexed metals, some metal-ligand complexes and many metal oxyanions. However, their adsorption properties of these precipitations are not fully exploited in wastewater treatment operations because of difficulties associated with their separation from the aqueous phase. This study describes experiments in which iron hydroxides were coated onto the surface of ordinary adsorbents(Sea sand) that are very resistant to acids, The coated adsorbents were used in adsorption of oxyanionic metals. The process was successful in removing some anions such as $SeO_3(-II)$ over a wide range of metal concentrations and sorption of oxyanionic metals increased with decreasing pH. Formation of two surface complexes for oxyanionic metals adsorption on iron hydroxides comprise (1) complexation of the free anion by a positively charged surface site, and (2) protonation of the adsorbed anion (or alternatively adsorption of a protonated form from solution) The coated adsorbents are inexpensive to prepare and could serve as the basis of a useful oxyanionic metal removal.

• 한국인쇄학회지
• /
• 제6권1호
• /
• pp.59-66
• /
• 1988

One of the rising problems in the field of environmental engineering is the eutrophic phenomenon which appears in the closed water basin. This study is the elimination orthophosphate by adsorption, which is indispensible nutritive element for eutrophication Ziriconium(IV) oxide hydrate-activatedcarbon complex. which has excellent adsorptivity for orthophosphate and can easily be reused after desorption process has been made and used as adsorbents. The main purpose of this study is to obtain intraparticle diffusivity which is basic data for the design of adsorption operation the experimental results were as follows. 1. Optimum condition which gave maxinum adsorption of orthophosphate was ph5 2. Equilibrium adsorption showed good consistency with Freundlich type. q=10.80C1/2.08 3. Pore diffusivity and surface diffusivity obtained the kinetic experiment of batch adsorption were respectivity 5.38 and 2.06 ($\textrm{cm}^2$/sec)

• 한국대기환경학회지
• /
• 제31권2호
• /
• pp.173-180
• /
• 2015

The purpose of this study was to fabricate a ferric nitrate impregnated activated carbon, and the performance for hydrogen sulfide by adsorption was evaluated. Sodium hydroxide was utilized to control pH in the process during generation of ferric hydroxide on the surface of the carbon. Critical mixing duration for generation of ferric hydroxide on the carbon was 48 hrs at pH 1 of the solution, in which the chemical adsorption of hydrogen sulfide was enhanced. The adsorption capacity of the impregnated carbon increased up to 0.10 g hydrogen sulfide/g carbon, which was 4.3 times higher than that of the raw carbon. Presence of FeOOH on the surface of the impregnated carbon was examined by X-ray diffraction.

• Carbon letters
• /
• 제2권1호
• /
• pp.9-14
• /
• 2001

Adsorption and desorption characteristics of methyl iodide at high temperature conditions up to $250^{\circ}C$ by TEDA-impregnated activated carbon, which is used for radioiodine retention in nuclear facility, was experimentally evaluated. In the range of temperature from $30^{\circ}C$ to $250^{\circ}C$, the adsorption capacity of base activated carbon decreased sharply with increasing temperature but that of TEDA-impregnated activated carbon showed higher value even at high temperature ranges. Especially, the desorption amount of methyl iodide on TEDA-impregnated carbon represented lower value than that on unimpregnated carbon. The breakthrough curves of methyl iodide in the fixed bed packed with base carbon and TEDA-impregnated activated carbon at high temperature were compared. TEDA-impregnated activated carbon would be applicable to adsorption process up to $150^{\circ}C$ for the removal of radioiodine in a nuclear facility.

• 환경위생공학
• /
• 제13권1호
• /
• pp.174-184
• /
• 1998

Biosorption characteristics were investigated to discuss the use of agar entrapped Spirulina to remove of heavy metal ions from polluted waters. Agar immobilized algae were used as bioadsorbent in continuous reactor for heavy metal ions removal. The process solution contains Pb, Cu, and Cd as single ion and binary ions. In the adsorption of single heavy metal ions by agar immobilized Spirulina, the adsorption reached within 1hr and observed diffusion limitation differed from the free algal cell adsorption. The optimum pH for the adsorption of heavy metals was 4.5 but the influence of pH decreased less than that of free algal cell. Also, the adsorption characteristics of single heavy metal ions with agar immobilized Spirulina fitted the BET isotherm. Both of experiments of free algal cell and agar immobilized algae showed higher removal efficiency in the single ion solutions than binary ions solutions. The experimental results in the packed column with agar immobilized algae were over 90% of removal efficiency for the Pb, Cu, and Cd in single ion solutions.