• Journal of the Korean Applied Science and Technology
• /
• v.31 no.4
• /
• pp.642-652
• /
• 2014

The synthesis of octenyl succinyl ${\beta}$-gucan (OSA-${\beta}$-glucan) was carried out and its interfacial properties at the oil-water interface and in emulsion systems were investigated. An aqueous ethanol system as a reaction media was used to facilitate the synthesis process; 10% (w/w) ethanol found to be the best as it showed a maximum degree of substitution (DS: 0.0132). FT-IR showed a characteristic absorption spectrum at $1736cm^{-1}$, indicating the esterification of octenyl succinyl groups to ${\beta}$-glucan backbone. As for interfacial tension measurements, it was decreased with increasing concentration of OSA-${\beta}$-glucan in the aqueous phase and when NaCl was added to aqueous OSA-${\beta}$-glucan solution in the range of 0.01 M to 0.1 M and also when pH was raised (pH 3 ~ pH 9). In systems of emulsion stabilized with OSA-${\beta}$-glucan, fat globule size found to decrease with increasing concentration of OSA-${\beta}$-glucan, showing a critical value of about $0.32{\mu}m$ at 0.5 wt%. When the OSA-${\beta}$-glucan emulsions were stored, it was found that fat globule size was increased with storage time and particularly pronounced increase was observed in emulsion with 1% OSA-${\beta}$-glucan, possibly due to depletion flocculation. Results of creaming stability evaluated by light scattering technique showed that it was more stable in emulsions containing smaller fat globule size. Surface load of OSA-${\beta}$-glucan in emulsions increased with increasing concentration of OSA-${\beta}$-glucan, suggesting a multilayer adsorption.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.6
• /
• pp.714-722
• /
• 2014

In the previous study, a variety of wood-based panels was thermally decomposed to manufacture carbonized boards that had been proved to be high abilities of insect and fungi repellence, corrosion and fire resistant, electronic shielding, and formaldehyde adsorption as well as sound absorption performance. Based on the previous study, carbonized medium density fiberboard (c-MDF) was chosen to improve sound absorption performance by holing and sanding process. Three different types of holes (cross shape, square shape, and line) with three different sanding thickness (1, 2, and 3 mm) were applied on c-MDF and then determined sound absorption coefficient (SAC). The control c-MDF without holes had 14% of SAC, however, those c-MDFs with holes had 16.01% (square shape), 15.68% (cross shape), and 14.25% (line) of SAC. Therefore, making holes on the c-MDF did not significantly affect on the SAC. As the degree of sanding increased, the SAC of c-MDF increased approximately 65% on sanding treated c-MDFs (21.5, 21.83, and 19.37%, respectively) compared to the control c-MDF (13%). Based on these results, composite sound absorbing panel was developed with c-MDF and MDF (11 mm). The noise reduction coefficient of composite sound absorbing panel was 0.45 which was high enough to certify as sound absorbing material.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.6
• /
• pp.31-42
• /
• 2007

To investigate the pyrolytic and anatomical characteristics of Korean softwood, Pinus densi-flora, Pinus rigida and Larix leptolepis, and hardwood, Acer palntatum, Fraxinus rhynchophylla and Quercus variabilis, chemical components analysis, TG-DTA (Thermogravimetric Analysis & Differential Thermal Analysis), MBA (Methylene Blue Adsorption) test and SEM observation were carried out. For TG-DTA, samples were carbonized up to $800^{\circ}C$ at the heating rate of $10^{\circ}C$/min under $N_2$ flows 1 l/min using thermogravimetric analyzer. Chemical component analysis of all samples resulted in typical contents of major wood component. In TG-DTA results, softwood showed higher char yield than hardwood, and lignin displayed the highest char yield among the major wood components. All samples showed typical TGA, DTG and DTA curves for wood pyrolysis except a few differences between softwood and hardwood. Content of lignin influenced its pyrolysis characteristics, while molecular structure of lignin affected not only the weight loss but also the yield of char. In MBA test results, MBA of softwoods was higher than that of hardwoods. Char of Pinus densiflora showed the highest MBA, but its degree was lower than activated carbon or fine charcoal about 23 and 4 times, respectively. SEM observation showed carbonization process preserves wood structure and retain the micro-structure of wood fibers.

• Applied Chemistry for Engineering
• /
• v.23 no.5
• /
• pp.433-439
• /
• 2012

In this study, a cationic surfactant BHMAS (N,N-bis-(3'-n-dodecyloxy-2'-hydroxypropyl)-N-methyl-2-hydroxyethylammonium methyl sulfate) having two lauryl and three hydroxyl groups was synthesized by the reaction of n-dodecyl glycidyl ether and 2-aminoethanol followed by the quarternization with dimethyl sulfate. The structure of the product was elucidated by $^{1}H-NMR$ and FT-IR. The CMC (critical micelle concentration) and surface tension of BHMAS at CMC condition were found to be $9.12\;{\times}\;10^{-4}$ mol/L and 28.71 mN/m respectively. Dynamic surface tension measurements using a maximum bubble pressure tensiometer indicated that a relatively long time was required to saturate the interface between air and aqueous surfactant solution. The interfacial tension measured between 1 wt% surfactant solution and n-decane reached an equilibrium value of 0.045 mN/m in 5 min. The adsorption capacity of the synthesized surfactant was observed to be excellent, which suggests that the surfactant can be used as a softening agent during a laundry process.

• Applied Chemistry for Engineering
• /
• v.17 no.1
• /
• pp.106-110
• /
• 2006

If drugs are made from nanoparticles, their formulations can be more effective than the conventional ones. Especially, water insoluble drugs having low absorption rates into our body could show improvement in their adsorption and bioavailability by decreasing their particle sizes to nanometers. In this study, polyvinylpyrrolidone (PVP) and various sugars were employed as stabilizers for the nanoparticles of a water insoluble drug, Itraconazole. Nanoparticles were successfully produced by the wet slurry process for five days. Then, spray drying converted the aqueous dispersions into dry powders, and the redispersibility of dried nanoparticles into water was investigated. The effects of temperature, pressure, and flow rate were studied to understand the importance of processing variables on redispersibility. It was found in particle size analysis that nanoparticles containing sugars have better redispersibility than those without sugars. Additionally, the mainly spherical morphology of dried nanoparticles was identified by SEM (Scanning Electron Microscopy) and AFM (Atomic Force Microscopy).

• Applied Chemistry for Engineering
• /
• v.16 no.4
• /
• pp.474-484
• /
• 2005

Biological treatment is a promising alternative to conventional air pollution control methods. Bioreactors for air pollution control have found most of their success in the treatment of dilute and high flow waste air streams containing volatile organic compounds and odor compounds. They offer several advantages over traditional technologies such as incineration or adsorption. These include lower treatment costs, absence of formation of secondary pollutants, no spent chemicals, low energy demand and low temperature treatment. The most widely used bioreactor for air pollution control is biofilter, but it has several limitations. In the past years major progress has been accomplished in the development of vapor phase bioreactor, in particular biotrickling filters. Biotrickling filters are more complex than biofilters, but are usually more effective, especially for the treatment of compounds which are difficult to degrade or compounds that generate acidic by-products. While the level of understanding of biotrickling filtration process for VOCs still remains limited, the evident success of biotreatment of VOC in air stimulated the pursue of acitve research. This paper presents fundamental and theoretical/practical aspect of air pollution control in biotrickling filter. Special emphasis is given to the operating parameters and the factors influencing performance for air pollution control in biotrickling filter.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.529-533
• /
• 2017

In this work, a new type of biosorbent was prepared from the biochar of Liriodendron tulipifera L. by adding an activation process using water vapor. By using the biosorbent, the removal characteristics of nikel ions in the water phase were investigated. When the equilibrium experiments to remove both 5 and 10 mg/L of nikel ions were performed, the adsorption amount of nickel ions was 4.2 and 5.4 mg/g, respectively. Also, the optimal initial pH was 6 to increase the removal efficiency with respect to two different nickel concentrations of 5 and 10 mg/L. To enhance the removal efficiency of 10 mg/L of nikel ions, a chemical treatment using critic acid was applied for the biosorbent. In addition, 100% removal efficiency was observed for 10 mg/L of nikel ions when the experiment was conducted for 2 h using the modified biosorbent treated by 4 M of critic acid. The results of desorption experiment to recover nikel ions indicated that 0.1 M of nitrilotriacetic acid (NTA) was selected as the optimal desorption agent. Consequently, these experimental results could be employed as an economical and environmentally friendly technology for the development of nickel removal processes.

• The Journal of the Petrological Society of Korea
• /
• v.17 no.3
• /
• pp.179-190
• /
• 2008

The distribution characteristics of some major environmental radionuclides ($^{40}K$, $^{228}Ac$, $^{226}Ra$, $^{222}Rn$) and U in rocks, soils and soil gas were studied at Geumjeong-Gu, Busan, Korea. The activities of radionuclides in granitic rocks are decreased in the odor of $^{40}K$>thorium decay series>uranium decay series. This reveals that Th was relatively more enriched in granitic rocks than U. The U content and activity of $^{226}Ra$ and $^{228}Ac$, however, don't reflect the fractionation sequence of granitic rocks in the study area. The activities of all these radionuclides and U content in soils are generally higher than in rocks, and their distribution in rocks, soils and soil gas show very low co-relationship. These facts indicate that the activities of radionuclides in soil and soil gas were greatly affected by leaching and adsorption properties of the radionuclides and their parents during weathering and pedogenetic process rather than their concentrations in parent rocks.

• Korean Journal of Veterinary Research
• /
• v.30 no.2
• /
• pp.145-156
• /
• 1990

This study was purposed to produce blood typing reagents for classifing Cheju horse's blood group factors. The blood typing reagents were prepared by immunization of sixteen pairs out of fourty eight heads of Cheju horses, and seventeen different blood typing reagents (anti-$A_1$, A', H, Z, $ZZ_2$, C, J, K, $P_1$, Q, R, S, $T_1$, $N_1$, $U_2$, X and $E_2$) were prepared from equine isoimmunization. The result for the reagent production and the variation of agglutinin and hemolysin titer are as follows: 1. Anti-K, R, S, $N_1$, $U_2$ and X acted exclusively as hemolysins whereas anti-J, $P_1$, $T_1$ and $E_2$ acted exclusively as agglutinins, however, Anti-$A_1$, A', H, Z, $ZZ_2$, C and Q reacted both as hemolysins and agglutinins. 2. Among the antibodies in most of the reagents reacted both as hemolysins and agglutinins, But anti-$A_1$, H, Z, $ZZ_2$ and Q elevated higher agglutin titers than hemolysin titers, Anti-A' and anti-C elevated higher hemolysin titers than agglutinin titers. 3. Complex antibody $A_1U_2$ was adsorbed $U_2$ and unified to $A_1$, while complex antibody X $N_1$ went through an adsorption process and produced simple antibody X and $N_1$, respectively. 4. In the hemolytic reaction, anti-K and anti-R showed the highest titer, In the agglutination reaction, anti-Z and anti-$ZZ_2$ showed the highest titer. 5. In the case of No.138~No.140 horse immunization combination and No.133~No.146 horse immunization combination, Although production of complex antibody $CE_2$ and $JP_1$ were expected, only anti-$E_2$ and anti-J were produced respectively. 6. The degree of elevation of antibody titer was varied by the blood types and by the types of donor and recipient combination. The fast elevating types, slow elevating types and types that never elevate the antibody titer were identified.

• KSBB Journal
• /
• v.21 no.3
• /
• pp.224-229
• /
• 2006

FEMLAB is a powerful interactive environment for modeling, solving all kinds of scientific and engineering problems based on partial differential equations(PDEs). Separation process of chiral compound in HPLC columns was simulated by FEMLAB. To study change of elution profile with isotherm models, non-competitive and competitive Langmuir adsorption isotherm were adopted. Separated material was (R, S)-ibuprofen [(R, S)-2-(4-isobutyl phenyl) propionic acid], an anti-inflammatory agent, which retain the pharmacological activity in the (S)-(+)-enantiomer. Sample concentrations were changed from 0.5 mg/ml to 2.0 mg/ml at a flow rate of 1 ml/min and flow rate varied from 1 ml/min to 3 ml/min at an ibuprofen concentration of 2.0 mg/ml and $20{\mu}l$ of injection volume. Simulated results were well fitted with experimental data.