• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.7
• /
• pp.499-504
• /
• 2009

Erythrosine is used a food coloring, ink and dye, etc. but erithrosine is rarely used in United States due to its known hazards. The adsorption characteristics of erythrosine by granular activated carbon were investigated in the batch adsorber and the packed column. The adsorptivity of activated carbon for erythrosine were largely improved by pH control. When the pH was 11 in the sample, the erythrosine could be removed 98% of initial concentration. It was estabilished that the adsorption equilibrium of erythrosine on granular activated carbon was successfully fitted by Freundlich isotherm equation in the concentration range from 10mg/L to 1,000mg/L. The characteristics of breakthrough curve of activated carbon packed column depend on the design variables such as initial concentration, bed height, and flow rate.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.4 no.2
• /
• pp.55-62
• /
• 1996

The purpose of this study is the evaluation of adsorption capacity of casts for heavy metals comparing with the activated carbon. The casts was obtained from vermicomposting of the mixed organic sludges which were generated from the treatment facilities for leather wastewater and cattle wastewater. The physico-chemical characteristics of cast was investigated. Also, the batch adsorption experiments of cast and activated carbon for heavy metals were carried out, and the results were analyzed by Freundlich isotherm. The buffering capacity to the acidic wastewater was founded in the cast, and the cation exchange capacity of cast impling adsorption capacity for soluble substances was evaluated as about 55me/100g. Those were implied that the cast have a large potential as a good adsorbent for soluble pollutants in wastewater. From the results of batch experiments, the removal efficiencies of tested various heavy metals including Pb, Cu, Cd, and Cr were very high value as 89-98% for the activated car-bon, and 80~95% for the casts except for Zn. The adsorption equilibriums for the two materials were achieved within 90 minutes. The order of preferable metals in the adsorption was found to be Pb>Cu>Cd>Cr>Zn on the cast and to be Pb>Cd>Cu>Cr>Zn on the activated carbon, respectively. From the above results, it might be con-cluded that cast is effectively available as a good adsorbent to treating the heavy metal bearing wastewater.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.19 no.1
• /
• pp.79-85
• /
• 2011

A study on characteristics for removal of arsenic ion using phosphorylated pine needles was performed. The surface condition of phosphorylated pine needles was confirmed by FT-IR, SEM(Scanning Electron Microscopy) and EDX(Energy Dispersive X-ray). The removal rate of arsenic ion was the highest as about 98% at pH 7. Most absorption for arsenic ion was also completed within 30min and decreased with time and pH of arsenic solution from 6.5 to 2.4.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.3
• /
• pp.155-160
• /
• 2015

BACKGROUND: Objective of this study was to investigate adsorption characteristics of $NH_4-N$ to biochar produced from rice hull in respective to mitigation of greenhouse gases. METHODS AND RESULTS: $NH_4-N$ concentration was analyzed by UV spectrophotometer. For adsorption experiment of $NH_4-N$ to biochar, input amount of biochar was varied from 0.4 to 10 g/L with 30 mg/L $NH_4-N$ solution. Its adsorption characteristic was investigated with application of Langmuir isotherm. Adsorption amount and removal rates of $NH_4-N$ were decreased at 53.9% and increased at 20.2% with 10 g/L compared to 0.4 g/L, respectively. The sorption of $NH_4-N$ to biochar produced from rice hull was fitted well by a Langmuir model. The largest adsorption amount of $NH_4-N$ ($q_m$) and binding strength constant (b) were calculated as 0.4980 mg/g, and 0.0249 L/mg, respectively. It was observed that dimensionless constant ($R_L$) was 0.58. CONCLUSION: It was indicated that biochar produced from rice hull is favorably absorbed $NH_4-N$, because this value lie within 0< $R_L$ <1.

• Journal of the Korean Society for Environmental Technology
• /
• v.19 no.6
• /
• pp.536-542
• /
• 2018

A system combining an electrochemical method and an adsorption system using activated carbon was assessed to facilitate the reuse of cabbage-salting brine. IrOx/Ti insoluble catalyst electrodes were used in the experiment. The results were analyzed to identify any changes in the residual chlorine concentration according to variations in the current density at a salinity of 10 %, as well as the capacity of the activated carbon to adsorb the residual chlorine and organic matter. For current densities of $500A/m^2$ and $1,000A/m^2$, the residual chlorine concentration did not increase, instead stabilizing once the current reached 0.33 Ah/L. To assess the adsorption efficiency according to the residual chlorine concentration, the unit amount of the adsorption can be estimated from $Y=0.0066+2.087{\times}10^{-4}b$. For both residual chlorine generation using an electrochemical method and chlorine removal through activated-carbon adsorption, the unit amount of adsorption was 0.33 g/g. The maximum amount of $COD_{Cr}$ organic matter adsorbed by the activated carbon was 0.021 g/g, while for $COD_{Mn}$, the value was 0.004 g/g.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.257-257
• /
• 2013

In order to selectively remove oil and organic compound from water, silica nanoparticles with hydrophobic coating was used. Since silica nanoparticles are generally hydrophilic, removal efficiency of oil and organic compound, such as toluene, in water can be decreased due to competitive adsorption with water. In order to increase the removal efficiency of oil and toluene, hydrophobic polydimethylsiloxane (PDMS) was coated on silica nanoparticles in the form of thin film. Hydrophobic property of the PDMS-coated silica nanoparticles and hydrophilic silica nanoparticles were easily confirmed by putting it in the water, hydrophilic particle sinks but hydrophobic particle floats. PDMS coated silica nanoparticles were dispersed on a slide glass with epoxy glue on and the water contact angle on the surface was determined to be over $150^{\circ}$, which is called superhydrophobic. FT-IR spectroscopy was used to check the functional group on silica nanoparticle surface before and after PDMS coating. Then, PDMS coated silica nanoparticles were used to selectively remove oil and toluene from water, respectively. It was demonstrated that PDMS coated nanoaprticles selectively aggregates with oil and toluene in the water and floats in the form of gel and this gel remained floating over 7 days. Furthermore, column filled with hydrophobic PDMS coated silica nanoparticles and hydrophilic porous silica was prepared and tested for simultaneous removal of water-soluble and organic pollutant from water. PDMS coated silica nanoparticles have strong resistibility for water and has affinity for oil and organic compound removal. Therefore PDMS-coated silica nanoparticles can be applied in separating oil or organic solvents from water.

• The Korean Journal of Ecology
• /
• v.26 no.2
• /
• pp.65-70
• /
• 2003

Shihwa tidal freshwater marsh was constructed recently to treat pollutants entering Shihwa lake. In this study, we examined the spatial and temporal patterns of heavy metal accumulation in soils of Shihwa marsh and sought correlations between several soil variables (pH, electrical conductivity, organic matter, and acid ammonium oxalate-extractable Fe and Al contents) and the heavy metal concentration of soils. Surface soil samples (0∼20 cm) were collected in June 2000, November 2000, and July 2001, and were analyzed for heavy metals (Zn, Cd, Pb, Cu, Cr, As, and Hg) and soil chemical properties. The neutral pH and water-saturated conditions of Shihwa marsh appeared to favor immobilization of heavy metal through adsorption onto soils. The concentrations of heavy metal (especially Zn, Cu, and Cr) in soils of Shihwa marsh increased along the sampling occasions, suggesting that soils of Shihwa marsh serve as a sink of heavy metal. Among the sub-marshes, metal concentrations were highest in Banweol high marshes and lowest in Samhwa marshes. The temporal and spatial variations in the heavy metal concentrations of soils were correlated positively with organic matter and oxalate extractable Fe and Al contents, but negatively with electrical conductivity. These results suggest that organic matter and hydrous oxide of Fe/Al may playa key role in removing heavy metals in soils of Shihwa marsh, and that heavy metal removing capacity would increase with desalinization. However, the removal patterns of heavy metal by reeds warrant further studies to evaluate the total removal capacity of heavy metals by Shihwa marsh.

• Environmental Engineering Research
• /
• v.25 no.3
• /
• pp.384-392
• /
• 2020

The presence of high fluoride concentration (> 1.5 mg/L) in water causes serious health problems such as fluorosis, infertility, brain damage, etc., which are endemic to many places in the world. This study has investigated the fluoride removal capacity of the novel activated biochar (BTS) and hydrochar (HTS) using Teff (Eragrostis tef) straw as a precursor. Activated biochar with mesoporous structures and large specific surface area of 627.7 ㎡/g were prepared via pyrolysis process. Low-cost carbonaceous hydrochar were also synthesized by an acid assisted hydrothermal carbonization process. Results obtained from both adsorbents show that the best local maximum fluoride removal was achieved at pH 2, contact time 120 min and agitation speed 200 rpm. The thermodynamic studies proved that the adsorption process was spontaneous and exothermic in nature. Both adsorbents equilibrium data fitted to Langmuir isotherm. However, Freundlich isotherm fitted best for BTS. The maximum fluoride loading capacity of BTS and HTS was found to be 212 and 88.7 mg/g, respectively. The variation could primarily be attributed to a relatively larger Surface area for BTS. Hence, to treat fluoride contaminated water, BTS can be promising as an effective adsorbent.

• Journal of Korean Society of Water Science and Technology
• /
• v.26 no.6
• /
• pp.13-26
• /
• 2018

This research was conducted to elucidate the removal mechanism of heavy metals and sulfate ion from acid mine drainage(AMD) by porous zeolite-slag ceramics (ZS ceramics) packed in a column reactor system. The average removal efficiencies of heavy metals and sulfate ion from AMD by the 1:3(Z:S) porous ZS ceramics in the column reactor under the HRT condition of 24 hours were Al 97.5%, As 98.8%, Cd 86.1%, Cu 96.2%, Fe 99.7%, Mn 64.1%, Pb 97.2%, Zn 66.7%, and $SO_4{^{2-}}$ 76.0% during 121 days of operation time. The XRD analysis showed that the ferric iron from AMD could be removed by adsorption and/or ion-exchange on the porous ZS ceramics. In addition it was known that Al, As, Cu, Mn, and Zn could adsorb or coprecipitate on the surface of Fe precipitates such as schwertmannite, ferrihydrite, or goethite. The EDS analysis revealed that Al, Fe, and Mn, which were of relatively high concentration in the AMD, would be adsorbed and/or ion-exchanged on the porous ZS ceramics and also exhibited that Al, Cu, Fe, Mn, and Zn could be precipitated as the form of metal hydroxide or sulfate and adsorbed or coprecipitated on the surface of Fe precipitates. The microscopic results on the porous ZS ceramics and precipitated sludge in a column reactor system suggested that the heavy metals and sulfate ion from AMD would be eliminated by the multiple mechanisms of coprecipitation, adsorption, ion-exchange as well as precipitation.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.7 no.3
• /
• pp.67-72
• /
• 2024

This study developed a dry composite module-type deodorization facility with Twisting airflow changes and two forms (catalyst, adsorbent) within one module. Experiments were conducted to evaluate the reduction efficiency of odor substances C₈H₇N and C₉H₉N. The device combines UV oxidation using TiO₂, catalytic oxidation using MnO₂, and adsorption using A/C in five different methods. Data analysis of experimental results utilized the statistical package program Python 3.12. The program applied frequency analysis of odor removal efficiency, one-way ANOVA, and post-hoc tests, with statistical significance determined by p-value to ensure reliability and validity of the measurements. Results indicated that the highest removal efficiency of C₈H₇N and C₉H₉N was achieved by the UV+A/C method, suggesting the superior effectiveness and efficiency of the developed device. Combining multiple processes and technologies within one module enhanced odor treatment efficiency compared to using a single method. The device's modularity allows for flexibility in adapting to various sewage treatment scenarios, offering easy maintenance and cost-effective deodorization. This composite reaction module device can apply multiple technologies, such as biofilters, plasma, activated carbon filters, UV-photocatalysis, and electromagnetic-chemical systems. However, this study focused on UV-photocatalysis, catalysts, and activated carbon filters. Ultimately, the research demonstrates the practical applicability of this innovative device in real sewage treatment operations, showing excellent reduction efficiency and effectiveness by integrating UV oxidation, TiO₂ photocatalysis, MnO₂ catalytic oxidation, and A/C adsorption within a modular system.