• 한국가스학회지
• /
• 제22권2호
• /
• pp.46-51
• /
• 2018

산업이 급속하게 발전함에 따라 자연 대기에서 악취를 유발하는 매우 적은 양의 황화수소가 존재합니다. 매립 및 하폐수처리장에서 나오는 황화수소 성분은 대기에 존재하므로 많은 민원이 발생됩니다. 민원이 발생하는 악취가스를 측정하기 위해 $10{\mu}mol/mol$ 농도 수준의 황화수소 인증표준물질(Certified reference material)을 개발하고자 하였다. 질소 안에 $10{\mu}mol/mol$ 수준의 황화수소 가스 제조는 ISO 6142에 의한 중량법을 사용하였다. 4 개의 알루미늄 실린더에 가스 CRM을 제조하고 GC-AED로 그 농도를 확인했습니다. 제조의 불확도는 0.50 % 미만이었고, 제조일치성은 0.22 %이었다. 실린더의 내부 흡착은 1500 psi에서 0.10 %이었고 1 년 동안 장기간 안정한 것으로 평가되었다. 이 황화수소 CRM의 제조 일치성, 실린더의 흡착 및 장기 안정성에 대한 상대 확장불확도는 1.05 %(신뢰도 95 %, k = 2) 이내로 개발되었다.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.107-115
• /
• 2001

Poly(L-lactide-co-glycolide)(PLGA) was blended with poly[$\omega$-methacryloyloxyethyl phospho-rylcholine-co-ethylhexylmethacrylate (PMEH)] (PLGA/PMEH) to endow with new functionality i.e., to improve the cell-, tissue- and blood-compatibility. The characteristics of surface properties were investigated by measurement of contact angle goniometer, Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR) and electron spectroscopy for chemical analysis (ESCA). NIH/3T3 fibroblast and bovine aortic endothelial cell were cultured on control and PLGA/PMEH surfaces for the evaluation of ceil attachment and proliferation in terms of surface functionality such as the concentration of phosphoryl-choline. Also, the behavior of platelet adhesion on PLGA/PMEH was observed in terms of the surface functionality. The contact angles on control and PLGA/PMEH surfaces decreased with increasing PMEH content from 75$^{\circ}$ to about 43$^{\circ}$. It was observed from the FTIR-ATR spectra that phosphorylcholine groups are gradually increased with increasing blended amount of MPC. The experimental P percent values from ESCA analysis were more 3.28∼7.4 times than that of the theoretical P percent for each blend films. These results clearly indicated that the MPC units were concentrated on the surface of PLGA/PMEH blend. The control and PLGA/PMEH films with 0.5 to 10.0 wt% concentration of PMEH were used to evaluate cell adhesion and growth in terms of phosphorylcholine functionality and wettability. Cell adhesion and growth on PLGA/PMEH surfaces were less active than those of control and both cell number decreased with increasing PMEH contents without the effect of surface wettability. It can be explained that the fibronectin adsorption decreased with an increase in the surface density of phosphorylcholine functional group. One can conclude the amount of the protein adsorption and the adhesion number of cells can be controlled and nonspecifically reduced by the introduction with phosphorylcholine group. Morphology of the adhered platelets on the PLGA/PMEH surface showed lower activating than control and the number of adhered platelets on the PLGA/PMEH sample decreased with increasing the phosphorylcholine contents. The amount of fibrinogen adsorbed on the PLGA/PMEH surface demonstrated that the phospholipid polar group played an important role in reducing protein adsorption on the surface. In conclusion, this surface modification technique might be effectively used PLGA film and scaffolds for controlling the adhesion and growth of cell and tissue, furthermore, blood compatibility of the PLGA was improved by blending of the MPC polymer for the application of tissue engineering fields.

• 대한화학회지
• /
• 제7권2호
• /
• pp.91-95
• /
• 1963

浮選理論의 基礎的인 硏究는 從來 主로 接觸角, 臨界 pH 曲線, 吸着量의 測定等에 依해서 試藥이 鑛粒子表面에 吸着하는 機構를 解明하였다. 그러나 最近 界面電氣化學的인 考察이 適用되어 試藥類의 吸着의 理論的인 究明이 試圖되고 있다. 鑛粒子는 電氣泳動現象에서 보는 바와 같이 水中에서 荷電되어 있고 한편 捕集劑는 ${\lceil}이온{\rfloor}$化 되어 있는 故로 當然히 그 吸着에는 電氣的인 相互作用이 있다고 想像할 수 있다. 따라서 電氣二重層理論이 鑛粒子의 荷電原因, 그 制御方法 및 吸着에 있어서 相互作用의 定量化에 基礎가 될 수 있는 것이다. 本硏究에 있어서는 Monazitc에 關하여 固相-液相界面에 있어서의 電氣化學的性質을 電氣泳動法으로 調査하고 한편 浮選捕集劑로 Dodecyl ammonium chlloride(D.A.C. 라 略稱) 및 Sodium dodecyl sulfate(S.D.S.라 略稱)를 使用하여 吸着量의 測定 및 浮遊度를 侍險한 結果 捕集劑 ${\lceil}이온{\rfloor}$이 鑛物表面에 吸着하는데 있어서 電氣的인 相互作用이 重要한 役割을 하고 있다는 것이 實證되였다. 卽 水溶液中에 있어서의 Monazite 表面의 電氣的 性質이 $H^+\;及\;OH^-$의 濃度(pH)에 따라 支配되는 것이고 電氣泳動法으로 測定한 Monazite의 等電點(Isoelectric point)은 pH 3.5이며 Monazite 表面은 pH 3.5以上에서는 陰(-)으로 pH 3.5以下에서는 陽(+)으로 荷電되어 있다는 것을 알 수 있다. 이와 같은 表面에 陰 ${\lceil}이온${\lceil}系의 S.D.S. 或은 陽 ${\lceil}이온{\rfloor}$系의 D.A.C.를 作用시키면 當然히 S.D.S.는 pH 低下에 따라서 卽 表面이 陰(+)이 되는데 따라 吸着量이 增加되고 한편 D.A.C. 때는 反對로 表面이 陰(-)이 되는데 따라 吸着量 이 增加된다고 볼 수 있으며 實地로 吸着量의 測定은 이것을 立證하고 있다. 이와 아울러 炭素鎖 12의 陽 ${\lceil}이온{\rfloor}$ 及 陰${\lceil}이온{\rfloor}$系 捕集劑 (卽 D.A.C. 및 S.D.S.)를 使用하여 Hallimond tube로 Monazite의 浮遊度를 測定한 結果를 보면 等電點을 中心으로 하여 左右로 거의 對稱的인 結果를 나타내고 있고 이것은 前述한 捕集劑의 吸着이 電氣的인 相互作用에 依한다는 事實을 뒷받침 하고 있는 것으로서 注目할 만한 現想이다. 이러한 基礎的인 究明은 重砂에서 Monazite를 될 수 있는대로 品位가 높은 精鑛으로 選別回收하는데 基本方針을 提示하는 것이다.

• KIEAE Journal
• /
• 제3권1호
• /
• pp.13-20
• /
• 2003

It is highly recognized that there is need for protection against indoor air pollution, as we realize environmental pollution is growing, For example, in an indoor environment, a person spends more than 80 percent of their time inside the building. Thus, concern about indoor decoration materials is growing, since they cause pollution in the rooms of an apartment, as well as in offices. As the indoor decoration materials become more diverse and lusurious, so the effect of VOCs(Volatile Organic Compounds) and HCHO(Formaldehy) is growing. The indoor decoration materials cause the Sick Building Syndrome, such as headaches, dizziness, or lack of concentraion, and they in turn cause serious deterioration in people's health. In this study, I probed the status of the indoor air pollution and carried on an investigation and analysis about the prevention technique. In doing so, I performed experimental tests and an assessment of the indoor decoration materials of an apartment. I also examined elements of the emitted and the emission. Finally, I examined the character of emissions, by changing environmental conditions, such as the temperature, humidity, and ventilation. With respect to VOCs tests, I applied the method of solid state adsorption using the adsorptive tube, based on the measurement of the American EPA TO-17, ASTM 5116-97, and the measurement of the Japanese Wall Decoration Industrial Association. The tested sample was analyzed by High Performance Liquid Chromatography, after going through the process of dissolvent extraction. As subjects of the test, Paint were selected. The process of this test is as follows; first, I figured out the character of the emission, by measuring the emitted concentration of VOCs and HOHC from the indoor decoration materials of an apartment. Second, I made a small-scale chamber and the test was processed in the chamber in order to suggest an environment-friendly prediction modlel development.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 1999년도 Pre-symposium of the 10th ISWPC Recent Advances in Paper Science and Technology
• /
• pp.239-244
• /
• 1999

aluminum sulfate (alum) as a representative retention aid in papermaking processes was added to pulp suspensions, and the aluminum components adsorbed on the pulp were investigated quantitatively by two types of X-ray elementary analyses with regard to simultaneous changes of their surface charges. X-ray photoelectron spectroscopy (XPS) and X-ray fluorescence analysis (XFA) were applied to determine the aluminum components retained in pulp pads up to ca. 10 nm and 100${\mu}$m depth, respectively. In other words, XPS was utilized to analyze the outermost surface layers of the samples, and XFA was available for measurement of their extensive regions. A particle charge detector (PCD) was used to monitor streaming potentials at various pHs of the pulp mixtures under moderate sharing conditions. At pH 4.5 of pulp suspensions containing alum, surface charges of pulp fibers varied from negative to slight negative (approximately neutral) according to adsorption of aluminum components onto the pulp fibers. Subsequently, when a dilute NaOH solution in limited amounts was added to pulp mixtures, both streaming potentials and surface aluminum content of the pulp fibers increased distinctly although little total aluminum retention increased. Further addition of alkali solutions brought drastic decreases of the surface charges and surface aluminum content, while total aluminum content, on the contrary, increased gradually under neutral conditions. These results indicate that residual aluminum ions remained in pulp suspensions are predominantly adsorbed on surfaces of pulp fibers by adequate alkali additions and they must sufficiently cationize the fiber surfaces with increases of somewhat cationic aluminum complexes formed on the surfaces. On the other hand, aluminum components formed in higher pH ranges have nearly no contribution to improvement of charge properties of the pulp fiber surfaces, even though aluminum retention in pulp pads increases. XPS and XFA analyses combined with streaming potential measurement using a PCD suggest close relationships between aluminum content on the pulp fiber surfaces and their charge properties.

• 전기학회논문지P
• /
• 제55권1호
• /
• pp.26-30
• /
• 2006

For the purpose of developing capacitive humidity sensor having interdigital electrodes, interdigital electrode was modeled and simulated to obtain capacitance and sensitivity as a function of geometric parameters like the structural gap and thickness. For the development of ASIC, switched capacitor signal processing circuits for capacitive humidity sensor were designed and simulated by Cadence using $0.25{\mu}m$ CMOS process parameters. The signal processing circuits are composed of amplifier for voltage gain control, and clock generator for sensor driving and switch control. The characteristics of the fabricated sensors are; 1) sensitivity is 9fF/%R.H., 2) temperature coefficient of offset(TCO) is $0.4%R.H./^{\circ}C$, 3) nonlinearity is 1.2%FS, 4) hysteresis is 1.5%FS in humidity range of $3%R.H.{\sim}98%R.H.$. The response time is 50 seconds in adsorption and 70 seconds in desorption. Fabricated process used in this capacitive humidity sensor having interdigital electrode are just as similar as conventional IC process technology. Therefore this can be easily mass produced with low cost, simple circuit and utilized in many applications for both industrial and environmental measurement and control system, such as monitoring system of environment, automobile, displayer, IC process room, and laboratory etc.

• 한국환경과학회지
• /
• 제19권12호
• /
• pp.1447-1454
• /
• 2010

In this study, the detection limits of lower fatty acids in air were investigated by using Dynamic SPME(Solid Phase Micro-Extraction), i.e. improved Head Space - SPME method(HS-SPME). This Dynamic SPME, called SPDE(Solid Phase Dynamic Extraction), is the analytical method for volatile compounds in air with the extraction by using a stainless steel needle of which inner surface is coated with adsorption material and following the gas chromatographic analysis by inserting the needle into a injection port of GC and subsequently, desorption of the volatile compounds into a gas-chromatographic column. Extraction was carried out by passing the sample air through the needle with a suction pump which has been used for a detection tube. The result of measurement for the 6 lower fatty acids showed that the detection limits ranged from 0.10 ppm to 0.44 ppm and the linear correlation coefficients were over 0.99. Relative standard deviations obtained from 5 analytical repetition of a ca. 1.6 ppm standard mixture were in the range of 1.87%~2.47%. This method has been shown to be a adequate for the measuring C2~C5 fatty acids in air in the concentrations of over several hundreds ppb.

• International Journal of Oral Biology
• /
• 제39권3호
• /
• pp.153-157
• /
• 2014

Natural biopolymers such as collagen and fibrin have been widely used in bone regenerative applications. Despite the frequent use, their comparative biological propertiesis are largely unknown. In a previous study, we found the superiority of fibrin to collagen in the adsorption of serum proteins and the proliferation and differentiation of cultured osteoblasts. In this study, we used an in vivo model to evaluate how effectively fibrin supports bone regeneration, as compared with collagen. Collagen and fibrin were placed in critical size defects made on rat calvarial bones. Compared with collagen, fibrin supported substantially more new bone tissue formation, which was confirmed by micro-CT measurement and histological analyses. The cells in the regenerative tissues of the fibrin-filled defects were immunostained strongly for Runx2, while collagen-placed defects were stained weakly. These in vivo results demonstrate that fibrin is superior to collagen in supporting bone regeneration.

• 공업화학
• /
• 제10권1호
• /
• pp.67-72
• /
• 1999

Nylon-inorganic filler alloy의 도금에 있어 최적 전처리 공정에 관하여 연구하였다. Nylon-inorganic filler alloy는 etching 공정만으로도 무정형층을 제거하여 요구되는 충분한 밀착력을 얻을 수 있었다. SEM과 표면조도 측정으로부터 etching 공정이 수지표면을 매우 거칠고 접착력을 우수하게 만든다는 결과를 얻었으며, 도금물질의 표면상태와 접착력은 Nylon-inorganic filler alloy 수지의 성형조건에 의존한다는 것을 확인하였다. EDS 분석으로 전처리 후 수지표면의 잔류금속의 종류와 양을 측정한 결과 Cr은 Sn과 Pd의 흡착에 크게 영향을 미치지 않는 것으로 나타났다.

• 한국안광학회지
• /
• 제3권1호
• /
• pp.269-277
• /
• 1998

$Li_2B_4O_7$의 완화현상은 이온 깡총뛰기에 의한 것과, 공간전하에 의한 완화현상의 두 가지 종류가 나타나며 이들의 완화시간은 실온 이상에서 모두 $10^2sec$보다 짧은 것으로 보고되었다. 지금까지 논의되지 않은 매우 낮은 주파수 (mHz 혹은 Hz)에서 나타나는 완화현상을 관찰하기 위하여 $30{\sim}500^{\circ}C$ 온도영역에서 TSDC(Thermally Stimulated Depolarization Current) 특성에 관한 실험과 사각형 파의 바이어스 전압을 인가하였을 때의 유전특성 조사에 의하여 이온 및 전자 trap에 의한 완화특성을 논의하였다. TSDC 조사를 통하여 $Li_2B_4O_7$의 TSDC 전류곡선이 두 개의 anomaly를 갖고 있는 것으로 나타났다. TSDC 에서 나타난 anomaly는 공간전하보다 수천배나 더 긴 완화시간을 갖고 있는 것으로 밝혀졌으며 이 중 저온 쪽의 anomaly는 공간전하 층에 수입된 전자들이 양의 공간전하 층에 trap 되어 공간전하의 재 분포를 방해하는 역할을 하여 trap 되어 있던 전자와 이온이 서로 분리되면서 공간전하의 재 분포가 이루어지는 전도기구에 기인하는 것으로 여겨진다. 또한 고온쪽의 anomaly는 음의 전하운반자가 전극에 흡착되어 나타나는 완화 mechanism으로 생각된다.