• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.307-312
• /
• 2001

Adsorption capacities of toxic heavy metal ions using as-received carbon(AC), single and double surface-modified activated carbon(OAC and DSMC) in wide pH ranges are extensively evaluated. Physical and chemical properties of surface-modified activated carbons are evaluated through BET analysis, surface acidity and oxides measurements. Based oil tile adsorption isotherms of Pb, Cd and Cr ions by AC, OAC and DSMC, the adsorption amount on DSMC was obviously higher than that on the other carbons. Breakthrough behaviors of ternary metal ions in a column packed with three kinds of carbon were also characterized with respect to the variations of the influent pH and concentration. The adsorption capacity of DSMC in a fixed bed stood a favorable comparison with that of as-received carbon.

• Journal of environmental and Sanitary engineering
• /
• v.13 no.1
• /
• pp.174-184
• /
• 1998

Biosorption characteristics were investigated to discuss the use of agar entrapped Spirulina to remove of heavy metal ions from polluted waters. Agar immobilized algae were used as bioadsorbent in continuous reactor for heavy metal ions removal. The process solution contains Pb, Cu, and Cd as single ion and binary ions. In the adsorption of single heavy metal ions by agar immobilized Spirulina, the adsorption reached within 1hr and observed diffusion limitation differed from the free algal cell adsorption. The optimum pH for the adsorption of heavy metals was 4.5 but the influence of pH decreased less than that of free algal cell. Also, the adsorption characteristics of single heavy metal ions with agar immobilized Spirulina fitted the BET isotherm. Both of experiments of free algal cell and agar immobilized algae showed higher removal efficiency in the single ion solutions than binary ions solutions. The experimental results in the packed column with agar immobilized algae were over 90% of removal efficiency for the Pb, Cu, and Cd in single ion solutions.

• Journal of Korean Society of Water and Wastewater
• /
• v.25 no.2
• /
• pp.241-248
• /
• 2011

This research was performed to evaluate the efficacy of phosphate removal from wastewater by surface-modified wood powder and to clarify the removal mechanisms. In this work, Pinus rigida which is abundant in Korea and has little economic value was used in preparation of the wood powder as a sorbent material. The experiments were carried out in 2 phases, isothermal adsorption test and column test. The results of adsorption test fitted well both the Langmuir and Freundlich isothermal equations. Adsorption capacity was highest with the bark powder followed by the mixed powder(50% bark powder and 50% woody powder) and woody powder. Phosphate removal efficiency was as high as 98% at initial phosphate concentration of 50mg/L. Specific surface area of the powder increased following the experiment and phosphate removal was speculated to occur through adsorption mechanism. Energy dispersive X-ray analysis(EDXA) revealed that the phosphate adsorbed onto the surface of the powder was in the form of strengite($FePO_{4}$).

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.805-813
• /
• 2013

In this study, molecular size distribution of natural organic matter (NOM) after ozonation was measured and its effect on adsorption capacity of activated carbon was investigated. According to the results, the molecular size of NOM was limitedly changed. Specifically, the molecular size of NOM between 5,000 to 10,000 Da were slightly decreased with increasing ozone doses. The adsorption capacity after ozonation was evaluated using Freundlich isotherm with ideal adsorbed solution theory (IAST) which simulated the multi components adsorption. Further, mini-column test was conducted. The Freundlich constant, K was reduced after ozonation and the non-adsorbable fraction was increased with ozonation. However, no correlation between K and ozone doses was found. The present study also agreed with the correlation between adsorption capacity and pore size characteristics of activated carbon.

• Journal of Integrative Natural Science
• /
• v.10 no.1
• /
• pp.43-50
• /
• 2017

Synthetic resins were combined 1-aza-12-crown-4 macrocyclic ligand with styrene divinylbenzene copolymer having 1%, 2%, 8%, and 16% crosslink by a substitution reaction. These synthetic resins were confirmed by chlorine content, elementary analysis, SEM, surface area, and IR-spectrum. As the results of the effects of pH, crosslink of synthetic resin, and dielectric constant of a solvent on metal ion adsorption for resin adsorbent, the metal ions showed high adsorption at pH 3 or over. Adsorption selectivity for the resin in ethanol solvent was the order of uranium ($UO_2{^{2+}}$) > cobalt ($Co^{2+}$) > dysprosium ($Dy^{3+}$) ion, adsorbability of the metal ion was the crosslink in order of 1%, 2%, 8%, and 16% and it was increased with the lower dielectric constant. In addition, theses metal ions could be separated in the column with 1% crosslink resin by using nitric acid (pH 2.0) as an eluent.

• Journal of Korean Society of Water and Wastewater
• /
• v.22 no.2
• /
• pp.251-257
• /
• 2008

Food compost, having a higher organic contents than soil, could be an alternative material to prevent the proliferation of heavy metals contamination in soil. In this study we used a convection-dispersion local equilibrium sorption model(CDE) and a two-site non-equilibrium sorption model to find the effects on the adsorption and transportation of Pb by mixing food compost with soil and we also tried to find the effect of velocity and concentration of the injected solution on the characteristics of Pb. We measured Pb concentrations in injection-liquid and in effluent, and then applied them to CXTFIT program. As a result of column experiments, some parameters(D, R, ${\beta}$, ${\omega}$) used in two-site non-equilibrium adsorption model were obtained. Characteristics of Pb adsorption and transport were analyzed using the parameters(D, R, ${\beta}$, ${\omega}$) obtained from the CXTFIT program, We could know that mixed soil with food compost showed a higher adsorption capacity from the retardation factor(R) calculated from the breakthrough curve(BTCs) of Pb. Rs of soil and mixed soil are 20.45, 37.45 respectively, indicating that the adsorption and the transportation characteristics could be accessed quantitatively by using of two-site non-equilibrium adsorption model.

• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.5
• /
• pp.535-541
• /
• 2005

Peat humin(p-Humin) extracted from Canadian Sphagnum peat moss was packed in a column and removal of heavy metal ions such as Cd, Cu and Pb from aqueous solution under flow conditions was studied. The metal ions were removed not only from single-element solutions but also from a multi-metal solution. Column kinetics for metal removal were described by the Thomas model. For single-component metal solutions, the maximum adsorption capacities of the p-Humin for Pb, Cu and Cd were 138.8, 44.66 and 41.61 mg/g, respectively. The results of multi-component competitive adsorption showed that adsorption affinity was in the order of Pb $\gg$ Cu > Cd. The adsorbed metal ions were easily deserted from the p-Humin with 0.05 N $HNO_3$ solution. It is apparent that 95% of the heavy metal ions were recovered from the saturated column. This investigation provides possibility to clean up heavy-metal contaminated waste waters by using the natural biomass, p-Humin as an environmentally friendly and cost-effective new biosorbents.

• Korean Journal of Food Science and Technology
• /
• v.32 no.6
• /
• pp.1403-1408
• /
• 2000

The methanol soluble fraction of the hot water extracts from Hovenia dulcis Thunb showed antioxidative and antimicrobial activity. The methanol fraction was successively purified with solvent fractionation, silica gel adsorption column chromatography, Sephadex LH-20 column chromatography, and octadecylsilane column chromatography. The purified active substances were isolated by high performance liquid chromatography. The isolated substances were identified as 3-methoxy-4-hydroxybenzoic acid (vanillic acid) and 3-methoxy- 4-hydroxycinnamic acid (ferulic acid) by LC-MS and GC-MS. Vanillic acid and ferulic acid showed antimicrobial activity against Gram-positive bacteria, Gram-negative bacteria and yeast. The DPPH-radical scavenging activity of ferulic acid appeared more active than that of vanillic acid. DPPH-radical scavenging concentration of ferulic acid and vanillic acid were $14\;{\mu}g/mL\;(SC_{50})$, $100\;{\mu}g/mL\;(SC_{10})$, respectively.

• Applied Biological Chemistry
• /
• v.36 no.2
• /
• pp.99-104
• /
• 1993

In order to explore the brassinosteroid-active component in Cassia tora, methanol extract of immature seeds was purified by sequences of solvent fractionation, silica gel adsorption chromatography, Sephadex LH-20 chromatography, charcoal adsorption chromatography and Bondesil chromatography. The activity of brassinosteroid was monitored by the rice inclination test and its presence could be confirmed in each purification step. The purified active components were separated by silica gel adsorption chromatography. Brassinosteroid substances in separated active fractions were identified as teasterone, castasterone, brassinolide by TLC and HPLC. Our work is probably the first report of endogenous brassinosteroid in Cassia tora. The content of brassinosteroid in Cassia tora as converted into brassinolide was $3.5{\sim}5.5\;ng/g$ fresh weight. The order of brassinosteroid contents was toward to be teasterone, castasterone, brassinolide.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.8
• /
• pp.1375-1382
• /
• 2007

A column preconcentration method with pulverized Amberlite XAD-4 loaded with bismuthiol I (BI) has been developed for the determination of trace Cd(II) and Cu(II) in various real samples by flame atomic absorption spectrophotometry. Various experimental conditions, such as the size of XAD-4, adsorption flow rate, amount of bismuthiol I, stirring time for adsorbing bismuthiol I on XAD-4, pH of sample solution, amount of XAD-4- BI, desorption solvent, and desorption flow rate, were optimized. Also, the adsorption capacity and the adsorption rate of Cd(II) and Cu(II) on XAD-4-BI were investigated. The interfering effects of various concomitant ions were investigated, Bi(III), Sn(II) and Fe(III) were found to affect the determination. But the interference by these ions was completely eliminated by adjusting the amount of XAD-4-BI resin to 0.70 g, although the adsorption flow rate was slower. For Cd(II) our proposed technique obtained a dynamic range of 0.5-40 ng mL-1, a correlation coefficient (R2) of 0.9913, and a detection limit of 0.3 ng mL-1. For Cu(II), the corresponding values were 2.0-120 ng mL-1, 0.9921 and 1.02 ng mL-1. To validate this proposed technique, the aqueous samples (stream water, reservoir water, tap water and wastewater), the diluted brass sample and the plastic sample, as real samples, were used. Recovery yields of 91-103% were obtained. These measured data were not different from ICP-MS data at 95% confidence level. Our proposed method was also validated using rice flour CRM (normal, fortified) samples. From the results of our experiment, we found that the technique we present here can be applied to the determination of Cd(II) and Cu(II) in various real samples.