• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.579-587
• /
• 2015

To support the use of nuclear power as a sustainable electric energy generating technology, long-term supply of uranium is very important. The objective of this research is to investigate the use of new adsorbent material for cost effective uranium extraction from seawater. An activated carbon-based adsorbent material is developed and tested through an electrosorption technique in this research. Adsorption of uranium from seawater by activated carbon electrodes was investigated through electrosorption experiments up to 300 minutes by changing positive potentials from +0.2V to +0.8V (vs. Ag/AgCl). Uranium adsorption by the activated carbon electrode developed in this research reached up to 3.4 g-U/kg-adsorbent material, which is comparable with the performance of amidoxime-based adsorbent materials. Electrosorption of uranium ions from seawater was found to be most favorable at +0.4V (vs. Ag/AgCl). The cost of chemicals and materials in the present research was compared with that of the amidoxime-based approach as part of the engineering feasibility examination.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.296-299
• /
• 2001

Data on the oil spill recovery from the water surface by light floating electromagnetic plants using a new magnetic adsorbent are given. The feasibility scope for further oil recovery from such gathered mixtures(oil+adsorbent), reuse of this magnetic adsorbent and its properly reclaiming and recycling were shown. The basic conception of the oil spill recovery and efficiency of this method were set forth.

• Carbon letters
• /
• 제9권2호
• /
• pp.97-104
• /
• 2008

In the present study Sisal fiber obtained from the leaves of Agave sisalana has been chosen to validate its viability as an adsorbent for the removal of Nickel from aqueous solutions. The material was also surface modified and its effect on adsorption of Nickel was also studied. Agave sisalana fiber was found to be a cheap and effective adsorbent doing away with the need to activate the material therby reducing processing cost. The equilibrium studies indicated that the adsorption capacity of raw fiber and the surface modified fiber was 8.66 and 9.77 mg/g respectively with the Langmuir isotherm describing the adsorption phenomena better than the Freundlich and Temkin isotherm. The adsorption was found to be exothermic from the thermodynamic studies and the kinetics showed that the adsorption phenomena were second order.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.296-299
• /
• 2001

Data on the oil spill recovery from the water surface by light floating electromagnetic plants using a new magnetic adsorbent are given. The feasibility scope for further oil recovery from such gathered mixtures(oil + adsorbent), reuse of this magnetic adsorbent and its property reclaiming and recycling were shown. The basic conception of the oil spill recovery and efficiency of this method were set forth.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.19-20
• /
• 2021

In order to reduce the emission of harmful substances that degrade indoor air quality, the Ministry of Environment strengthened the standards for the content of VOCs in paints to supply and sell eco-friendly paints. In this related study, an eco-friendly paint mixed with a powder-type absorbent material was prepared and its characteristics were reviewed. As the amount of powder-type absorbent material increased, the workability (viscosity, peeling, etc) decreased. Accordingly, this study aims to examine which particle size is suitable according to the particle size of the granular adsorbent while improving the problem of the powdery adsorbent by using the granular adsorbent. As an experimental plan, the particle size of granular activated clay is selected to be 0.250, 0.425, 0.710(mm), and the decrease rate of VOCs concentration and impact resistance are reviewed. As a result of the experiment, as the particle size of the granular activated clay increased, the decrease rate of the VOCs concentration increased and the impact resistance improved. Therefore, considering the problems that occur after actual painting, the particle size of granular activated clay of 0.425mm is suitable.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 Proceedings of the 4th Korea-China Joint Workshop on Nuclear Waste Management
• /
• pp.64-72
• /
• 2004

The dryer (ten per unit) are operating to remove tritium in PHWR(Pressurized Heavy Water Reactor). There are coming out heavy water adsorbent from operating the dryer (95 drums for ten year per unit) The amount of radioactivity of heavy water adsorbent almost exceed ninety times more than disposal limit-in-itself showed by The Ministry of Science and Technology. It has to be disposed whole radioactive waste products, however there are problems of increase at the expense of their permanent disposal. In this research, We have studied how to remove kinds of nuclear materials and amount of tritium with in heavy water adsorbent. As the result we could develop disposal equipment and apply it. D20 adsorbent have to contain below Gamma nuclide O.3Bq/g and tritium 100Bq/g "The Regulation for disposal of the radioactivity wastes" showed by The Ministry of Science and Technology. There fore. So as to remove amount of tritium and kinds of nuclear materials (DTO) we needed a equipment. Also we have studied how to remove effectively radioactivity with in Adsorbent. As cleaning heavy water adsorbent and drying on each condition (temperature for drying and hours for cleaning). Because there is something to return heavy water adsorbent by removing impurities within adsorbent when it is dried o high temperature. After operating, we have been applying this research to the way to dispose heavy water adsorbent. Through this we could reduce solid waste products and the expense of permanent disposal of radioactive waste products and also we could contribute nuclear power plant run safely. According to the result we could keep the best condition of radiation safety super vision and we could help people believe in safety with Radioactivity wastes control for harmony with Environment.

• 방사성폐기물학회지
• /
• 제15권1호
• /
• pp.1-14
• /
• 2017

본 연구에서는 고염/고방사성 폐액 내 함유된 주요 고방사성핵종인 Cs 제거를 목적으로 고효율의 복합 흡착제(potassium cobalt ferrocyanide (PCFC)-loaded chabazite (CHA)) 합성 및 이의 적용성을 평가하였다. 복합 흡착제는 Cs을 비롯한 다른 입자를 수용할 수 있는 CHA를 지지체로 선정하였으며, $CoCl_2$ 및 $K_4Fe(CN)_6$ 용액의 단계적인 함침/침전을 통해 PCFC를 CHA 세공 내에 고정화함으로써 합성하였다. 복합 흡착제의 합성 시 평균 입자크기가 $10{\mu}m$ 이상의 CHA를 지지체로 사용할 경우, PCFC 입자는 안정적인 형태로 고정화되었다. 또한, 합성 시 복합 흡착제의 정제를 증가시키는 세척 방법을 최적화함으로써, 복합 흡착제의 물리적 안정성이 향상되었다. 최적의 합성법을 통해 얻은 복합 흡착제에 의한 Cs 흡착 시, 담수(무염조건) 및 해수(고염 조건)에서 모두 빠른 흡착 속도를 보였으며, 염 농도와 무관하게 비교적 높은 분배계수 값($10^4mL{\cdot}g^{-1}$ 이상)을 나타내었다. 그러므로, 본 연구에서 합성한 복합 흡착제는 CHA 및 PCFC가 각각 가지고 있는 물리적 안정성과 Cs에 높은 선택성 등을 고려하여 촤적화한 소재이며, 고염/고방사성폐액에 함유되어 있는 Cs을 고효율로 신속하게 제거할 수 있음을 알 수 있다.

• 한국연초학회지
• /
• 제27권2호
• /
• pp.178-188
• /
• 2005

To use the filter materials for selective removal of carbonyl compounds in cigarette mainstream smoke, hydrazine such as 2,4-dinitrophenylhydrazine and dansylhydraznie impregnated adsorbents were prepared with perchloric acid or phosphoric acid as a accelerator in hydrazone formation reaction. The change of morphology of adsorbents in various of impregnator were investigated by SEM. Impregnation amount caused by reaction time, acid type and impregnation reagent, and the adsorption properties of carbonyl compounds in cigarette mainstream smoke were investigated. Amounts of impregnation was increased as increasing reaction time. The removal amount for vapor phase carbonyl compounds by 2,4-DNPH impregnated adsorbent was higher than that of dansylhydrazine impregnated adsorbent. The selectivity of 2,4-DNPH impregnated polyacrylic type adsorbent was superior to those of other adsorbents. This results indicated that the 2,4-DNPH impregnated polyacrylic adsorbent was applicable to cigarette filter material because of its fast reactivity and porosity.

• Advances in environmental research
• /
• 제1권2호
• /
• pp.167-179
• /
• 2012

Pistachio shell (Pistacia vera) (PS), a low-cost material, has been utilized for the removal of the Cr(VI) ions after treatment with citric acid. Batch experimental steps were applied to obtain Cr(VI) ion adsorption details for the equilibrium between Cr(VI) and modified pistachio shell (MPS). The influences of contact time, pH, adsorbent dose and initial chromium concentration on the adsorption performance of MPS was investigated in detail. The results displayed that adsorption of Cr(VI) by MPS reached to equilibrium after 2 h and after that a little change of Cr(VI) removal efficiency was observed. The sorption percent is higher at lower pH and lower chromium concentration. Two possible mechanisms for reduction of Cr(VI) to Cr(III) can be suggested in Cr(VI) removal. In the first mechanism, Cr(VI) is reduced to Cr(III) by surface electron-donor groups of the adsorbent and the reduced Cr(III) forms complexes with adsorbent or remains in the solution. This Cr(III) is not adsorbed by adsorbent at pH 1.8. But in second mechanism, the adsorption-coupled reduction of Cr(VI) to Cr(III) occurred on the adsorbent sites. The equilibrium sorption capacity of Cr(VI) ion after 2 h was 64.35 mg/g for MPS.

• 공업화학
• /
• 제30권4호
• /
• pp.460-465
• /
• 2019

본 연구에서는 각종 산업시설에서 발생하는 $H_2S$를 처리하기 위하여 금속산화물 기반의 흡착제의 활성물질 최적화 및 입상형 흡착제 제조에 관한 연구를 진행하였다. 적용되는 흡착제는 금속산화물 중 높은 물리화학적 안정성과 비교적 큰 비표면적을 가지는 $TiO_2$를 이용하여 활성물질의 종류와 함량을 다르게 제조하였다. 이러한 흡착제의 물리화학적 특성과 흡착성능과의 상관관계를 확인한 결과 활성금속 중 대표적인 알칼리 물질인 KI를 첨착한 흡착제의 흡착성능이 가장 우수하였으며, 함량과 흡착성능의 관계는 비례하지 않고 volcano plot을 나타냈다. XRD, SEM, BET 분석을 통해 특정 함량 이상부터 활성물질이 표면에 노출됨을 확인하였으며, 비표면적은 $40{\sim}100m^2/g$, 기공의 부피는 $0.1{\sim}0.3cm^3/g$의 기공 특성을 가질 때 흡착성능이 가장 우수한 것으로 판단하였다. 실 공정 적용을 위해 흡착제를 입상형으로 성형 또는 세라믹 지지체에 코팅을 진행하였으며, 성형보다는 세라믹 지지체에 흡착제를 코팅하였을 때 우수한 흡착성능을 나타내는 것으로 확인하였다.