• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.143.2-143.2
• /
• 2016

The influence of electric field on CO adsorbed on Pt(111) was investigated with reflection-absorption infrared spectroscopy (RAIRS) in ultrahigh vacuum system. The ice film capacitor method was used to apply electric field to the amorphous ice film with CO on Pt(111). Two systems were compared by measuring the change of the CO stretching vibrational mode under applied electric field; one is CO on Pt(111), and the other is CO buried inside an ice film on Pt(111). By comparing them, we were able to calculate the additional effect of adsorption of CO on Pt(111) on peak shift. The CO adsorbed on Pt(111) has shown larger peak shift than CO adsorbed with H2O when we applied stronger electric field. Additionally, the differences were observable when the applied electric field exceeds $1{\times}10V/m^8$.

• KEPCO Journal on Electric Power and Energy
• /
• 제4권1호
• /
• pp.39-45
• /
• 2018

Ammonia Adsorbed Fly Ash (AAFA) samples produced from coal fired plants equipped with SNCR (Selective Non-Catalytic Reduction) of nitrogen oxides with urea have been chemically analyzed, and their physical and dissolution properties have been investigated. XRD results for the ammonia component in AAFA ascertained that ABS (ammonium bisulfate) and AS (ammonium sulfate) were deposited on fly ash as $SO_3$ reacted with unreacted ammonia at SNCR. SEM and EDS images showed that fine ashes on large fly ash surface of sphere type were agglomerated, due to adhesive role of ammonium salts attached fly ashes. Dissolution test results of ammonium salts absorbed on AAFA in distilled water or sea water showed that the proportion of un-ionized $NH_3$ to $NH_4{^+}$ were primarily a function of pH and temperature. Increasing pH and temperature causes an increase in the fraction of un-ionized $NH_3$. At pHs of 9.6 and 10.7, un-ionized $NH_3$ and $NH_4{^+}$ ions are present in equal amounts at distilled water and sea water, respectively.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.109.1-109.1
• /
• 2015

Understanding the reaction mechanisms and structures underlying the adsorption of biomolecules on semiconductors is important for functionalizing semiconductor surfaces for various bioapplications. Herein, we describe the characteristic behavior of a primary nucleobase adsorbed on the semiconductor Ge(100). The adsorption configuration of guanine, a primary nucleobase found in DNA and RNA, on the semiconductor Ge(100) at an atomic level was investigated using scanning tunneling microscopy (STM) and density functional theory (DFT) calculations. When adsorbed on Ge(100) at room temperature, guanine appears dark in STM images, indicating that the adsorption of guanine on Ge(100) occurs through N-H dissociation. In addition, DFT calculations revealed that "N(1)-H dissociation through an O dative bonded structure" is the most favorable adsorption configuration of all the possible ones. We anticipate that the characterization of guanine adsorbed on Ge(100) will contribute to the development of semiconductor-based biodevices.

• 한국식품과학회지
• /
• 제30권2호
• /
• pp.372-378
• /
• 1998

Formaldehyde첨가 대두단백필름과 formaldehyde흡착 대두단백필름을 대조구용 대두단백필름과 함께 제조하여 각 필름의 색깔, 인장강도, 연신율, 투습도 및 수분용해도 등을 측정하여 제조방법에 따른 효과를 조사하였다. formaldehyde의 처리방법에 따라 필름의 특성은 크게 영향을 받았다. formaldehyde첨가 대두단백필름의 물리적 특성은 대조구인 대두단백필름에 비해 큰 차이가 없었으나 formaldehyde흡착 대두단백필름은 그 특성이 크게 변하였다. Formaldehyde흡착 필름은 가교결합이 형성되어 필름의 수분용해도가 26.1%에서 16.6%로 크게 감소하였으며, 인장강도는 2배가 증가한 반면 필름의 연신율은 2배로 감소하였다. 이는 formaldehyde와 반응하여 단백질 분자 사이에 가교결합이 형성되면서 단백질이 불용화 및 경화되었기 때문이다.

• 한국환경과학회지
• /
• 제7권6호
• /
• pp.803-809
• /
• 1998

Heavy metal ions in water were removed using algal biomass as adsorbents. Absorbents were dried for 3 days, ground them by 40~60 mesh and then were swelled in a buffer solution for 1hr. After being packed in the column, commercially available standard solution of Cd(II) and Pb(II) ions were diluted to get the suitable concentration and then it was eluted with the rate of 1mι/min. Heavy metals on the adsorbents were recovered with nitric acid. More amounts of Cd(II) or Pb(II) ions in green algae, Ulva pertusa, than in brown algae, Sargassum horneri, were adsorbed. Pb(II) ion was adsorbed more than Cd(II) ion in both algae. The pH effect of adsorbed amounts of Cd(II), Pb(II) ions on the biomass was shown the following order ; pH 10.5 ＞ 8.5 ＞ 7.0 ＞ 5.5 ＞ 3.5. Recovery ratio of metal ions front algae is shown higher in acidic or neutral conditions than it in alkalic ones. Pb(II) ion is recovered relatively more than Cd(II) ion in our system.

• Journal of Microbiology and Biotechnology
• /
• 제16권1호
• /
• pp.15-19
• /
• 2006

A ferredoxin adsorbed hetero self-assembled layer was fabricated on chemically modified Au substrate, 4-Aminothiophenol (4-ATP) was deposited onto Au substrate and then N-succinimidyl-3-[2-pyridyldithio] propionate (SPDP) was adsorbed on the 4-ATP layer, since SPDP was used as a bridging molecule for ferredoxin adsorption, Ferredoxin/SPDP/4-ATP structured hetero layer was constructed because of strong chemical binding of ferredoxin, SPDP, and 4-ATP, The surface of the ferredoxin-adsorbed SPDP/4-ATP layer was observed by scanning tunneling microscopy, The hetero film formation was verified by surface plasmon resonance measurement. The current flow and rectifying property based on the scanning tunneling spectroscopy I-V characteristics was achieved in the proposed hetero layer. Thus, the hetero layer structure of ferredoxin functioned as a molecular diode with rectifying property, The proposed molecular diode can be usefully applied for the development of molecular scale electronic devices.

• Environmental Engineering Research
• /
• 제22권3호
• /
• pp.255-265
• /
• 2017

Polyelectrolytes are commonly used as flocculants in drinking water treatment. However the growing concerns about their toxicity have motivated the search for biocompatible flocculants. Here, we show that gelatin, a natural amphoteric polyelectrolyte, can be effectively adsorbed on clay surfaces and can potentially be a suitable substitute for existing flocculants. The adsorption of gelatin from its aqueous solution onto the mineral clay surfaces at different conditions was systematically investigated using the design of experiments methodology. The gelatin adsorption was found to vary considerately with pH variation showed a maximum adsorption at its isoelectric point. The amount of adsorbed gelation increased with increasing pH from 3 to 5, attained a maximum at pH 5 and then decreased with increasing pH from 5 to 11. Similarly, the amount of adsorbed gelatin showed decreasing trends around salt concentration of 0.05 M and temperature $35^{\circ}C$. On the other hand, the adsorption was continuously increased with time and polymer concentration in the range of 0.1-0.9 mg/dL. Finally, the jar tests confirmed the ability of gelatin for using a natural flocculant for water treatment.

• Bulletin of the Korean Chemical Society
• /
• 제32권8호
• /
• pp.2705-2710
• /
• 2011

Four MOFs functionalized with 1-Me, 1-Pr, 1-Ph, and 1-$PhCF_3$ were prepared through post-synthetic modifications of a metal-organic framework (MOF), UMCM-1-$NH_2$ (1) with acetic, butyric, benzoic, and 4-(trifluoromethyl)benzoic anhydrides, respectively. Methane adsorption measurements between 253 and 298 K at pressures up to 1 bar indicated that both 1-Ph and 1-$PhCF_3$ adsorbed more $CH_4$ than the parent MOF, 1. All the functionalized MOFs adsorbed more $CO_2$ than 1 under conditions similar to the $CH_4$ test. The introduction of functional groups promoted adsorption of both $CH_4$ and $CO_2$ despite significantly reducing Brunauer-Emmet-Teller (BET) surface area: 4170 (1), 3550 (1-Me), 2900 (1-Pr), 3680 (1-Ph), and 3520 $m^2/g$ (1-$PhCF_3$). Electron-withdrawing aromatic groups (1-Ph, 1-$PhCF_3$) more effectively enhanced $CO_2$ adsorption than electron-donating alkyl groups (1-Me, 1-Pr). In particular, 1-Ph adsorbed 23% more $CO_2$ at 298 K and 50% more at 253 K than 1.

• 한국재료학회지
• /
• 제11권10호
• /
• pp.895-899
• /
• 2001

Electrical properties of porous $BaTiO_3-based$ ceramics were investigated from the viewpoint of adsorbed oxygen. Namely, the effects of heat-treatment temperature ($450-600^{\circ}C$) and measuring atmosphere (oxygen and nitrogen) on the PTCR characteristics of the porous $BaTiO_3-based$ ceramics were investigated. It was found that the PTCR characteristics of the porous $BaTiO_3-based$ ceramics was developed at $\geq$55$0^{\circ}C$, and the magnitude of the PTCR characteristics increased with increasing heat-treatment temperature. It was also found that the magnitude of the PTCR characteristics in the porous $BaTiO_3-based$ ceramics increased in oxygen atmosphere, whereas decreased in nitrogen atmosphere during heating and cooling.

• Journal of the Korean Wood Science and Technology
• /
• 제42권2호
• /
• pp.207-213
• /
• 2014

This study was carried out to investigate the feasibility and usefulness of a commercial synthetic adsorbent, Diaion HP 20, for the isolation of proanthocyanidins (PAs) from hot water extract (HWE) prepared from Pinus radiata bark. Most ultraviolet (UV) absorbing materials in HWE were adsorbed onto Diaion HP 20 and easily recovered by simple ethanol (EtOH) washing. More than 50% of the UV absorbing materials were adsorbed within 20 minutes, and the adsorption equilibrium was reached within 3 h. The recovered materials from Diaion HP 20 were mostly composed of PAs, but some monomeric flavonoids such as taxifolin and unidentified hydrophobic materials were also adsorbed. The impurities such as carbohydrates and inorganic materials contained in HWE were mostly removed by Diaion HP 20. The adsorption ability of the UV absorbing materials onto Diaion HP 20 was almost the same as the first cycle even after 14 times of repeating cycles of adsorption and desorption. The radical scavenging ability of the recovered materials from the adsorbent was slightly higher than that of the pure PAs prepared by Sephadex LH 20 from the same HWE.