• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.425-430
• /
• 2002

The needs of the times, a cement plays an important roll in the materials field. So, in this research we would like to study on the properties of Photocatalytic Cement for waste gas reduction. The fundamental phenomena of the Photocatalytic Cement were observed by the NOx Analyzer, Bonding strength, SEM, Flow and Surface hardness(Pencil tester). As a result of this study, the Photocatalytic Cement used Photocatalytic powder, admixture and other materials can obtain its physical properties, also photocatalytic efficiency. If we have added a various experiment, we could have to develop the Photocatalytic Cement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.415-420
• /
• 2002

This study is intended to investigate the influence of mineral admixtures on the autogenous and drying shrinkage of high performance concrete. According to results, drying shrinkage increases with increase of fly ash content, and it does not show difference with replacement of blast furnace slag powder. It increases when incorporating silica fume or fly ash and silica fume together. The autogenous shrinkage shows increasing tendency with increase of silica fume and blast furnace slag powder content, and incorporating of silica fume or fly ash and silica fume together has effects on reducing autogenous shrinkage. Therefore, it is considered that application of both silica fume and fly ash can reduce the cracks caused by autogenous shrinkage, including enhancement in strength and placeability of high performance concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.81-84
• /
• 2002

Activation energy value is different according to cement, admixture and water-cement ratio also the relation of age-temperature is as non-linear as activation energy value is large. So to make accurate explanation for the effect of temperature on concrete strength development property, it is necessary to investigation for activation energy value. This study compares activation energy value recommended by Freiesleben and ASTM with activation energy value obtained by consequence of mortar examination according to ASTM C 1074-93. As the result of this study, activation energy value obtained by the study is 37.19KJ/mol, and in case of activation energy value obtained by the study explain temperature's influence about concrete strength development more accurate than activation energy value recommend by Freiesleben and ASTM.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.26-27
• /
• 2015

The purpose of this study was to investigate the compressive strength property into concrete using rice straw ash.. In an effort to evaluate the effects of rice straw ash as mineral admixture, rice straw ash was mixed with cement at the mixture ratio of 0, 5, 10 and 15% relative to the cement weight. When the mixture ratio of rice straw ash was 10%, the highest compressive strength was observed, while the strength tended to decrease when the mixture ratio of rice straw ash was 15% even if it exhibited higher compressive strength than the plain. And it was observed that compressive strength of concrete containing rice husk ash was a similar a compressive strength of concrete containing silica fume.

• Journal of environmental and Sanitary engineering
• /
• v.18 no.4
• /
• pp.36-44
• /
• 2003

The cement-based system among S/S(Solidification/Stabilization) is widely used to treat hazardous wastes. In this study, tannery sludge was solidified to evaluate the stabilization effects of using admixtures in the cement-based S/S. Fly ash as substitute also used to increase the strength of the S/S of hazardous waste. The compressive strength measurement and leaching experiment of chromium metal of solidified mortar were carried out to compare and evaluate the physical and chemical characteristics of solidified hazardous waste sludge. From the result of this study, there was increased of compressive strength by using AEW-3(early-hardening AE water reducing agent), and leaching concentration of chromium became low enough to satisfy the regulatory criteria. The successful solidification for the organic contaminant and heavy metal in hazardous waste should enable to treat by cement-based system using early-hardening AE water reducing admixture and fly ash as substituted cement.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1993.04a
• /
• pp.47-52
• /
• 1993

Admixtures for concrete placed underwater have been developed to the stage that they are now widely used. The use of this type of product allows concrete to be placed underwater with far less risk than was previously possible. One of the problems facing users of underwater concreting admixtures is how does one test such products in order to access their performance initially while minimizing the expense of carrying out site trials. This paper will introduce three categories of laboratory test for underwater concrete listed next : fluidity test, non-segregation test, strength test. Trial underwater concretes were ordinary Portland cement. Strength and workability development and segregation resistance properties of the concrete under the coexistence of some kinds of superplasticizer were studied for this laboratory tests.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.245-250
• /
• 1998

The Elastic modulus depends on the elastic property of composition materials, the gravity of aggregate, the bond strength of binder, the usage and quantity of admixture, curing and measuring method, etc. Accordingly, the aim of this study, by manufacturing concrete of practical high strength range(600~ 1000kg/$\textrm{cm}^2$) with the specific cement and mineral admixtures, is to compare elastic modulus with the existing equations and also to estimate elastic property of use materials. As a result, it could be confirmed that the existing equations which were proposed by the ACI 363, CEB-FIP Code, and New-RC have a tendency to the overestimation in general. However, it could be confirmed that the KCI-96 and Norwegian NS 3473 equations are closed to measuring results, and that the elastic modulus property have a different tendency due to types of cements.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.324-329
• /
• 1998

Recently the use of the underwater concrete with the antiwashout admixture is increased considerably. When we intend to apply it to the field, we must consider the water temperature effect. In this study, we investigate the properties of setting time, early strength, hydration temperature history and core strength with the antiwashout underwater concrete in the water temperature 8$^{\circ}C$, 14$^{\circ}C$ and 22$^{\circ}C$ respectively. As a result of experiment, as the water temperature is decreasing, setting time is delayed twice of three times and early strength is lower from 10% to 50%. Therefore to compensate the decrease of the early strength, we used the accelerator and investigated the concrete properties.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.199-202
• /
• 1999

Recently, the antiwahout underwater concrete with an natiwashout admixture has been increasingly used for underwater structures. However, the credibility of antiwahout underwater concrete was brought up as problems because it was seldom applied to fields. In this study, experiments were made on the basic properties of antiwashout underwater concrete replaced with GGBF Slag from 40% to 60% to improve its properties. Resultant to the test, we got the results as follows; the difference of U-type heght was decreased, and the slump flow was increased. Whereas the amount of suspended solids became high as to increasing the replacement ratio of GGBF Slag, pH value became low. Beacause the ratio of compressive strengths (in water compared to in air) at 28days was obtained over 90%, its value is satisfied with 70% of a criterion.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.175-178
• /
• 1999

In most domestic construction fields, excessive cement content has been used because of stubborn official inspection. The purpose of this study is to reduce the cement content of mix proportioning for the decrease of hydration heat, brittleness and drying shrinkage which governs durability of concrete significantly. Parameters includes the compressive strengths, type and dosage rate of chemical and mineral admixtures and types of concrete. It is found that the chemical admixture is efficient to the reduction of cement content for high strength concrete (400kg/$\textrm{cm}^2$) and the effectiveness of mineral admixtures in the low strength concrete is somewhat higher than the high strength concrete.