• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 정기총회 및 추계학술대회 논문집 학회본부
• /
• pp.6-8
• /
• 1993

Short Circuit analysis is one of the most fundamental procedures for power system analysis problem. In order 10 solve the problem, In order to solve the problem, it's required to develop an advanced algorithm by which modified bus admittance matrix are easily computed for a large number of alternative network configuration. This paper proposes a new calculation method to efficiently modify the bus impedance matrix elements of large power system by method for removal of link, and presents its Practicality by applying the proposed method in the power system model.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 춘계학술대회논문집; 경주코오롱호텔; 22-23 May 1997
• /
• pp.506-512
• /
• 1997

Ultrasonic knives have been successfully used for the surgery of many medical fields. However, the conventional ultrasonic knives for surgical operation cannot be controlled its resonant frequency. So if the material to cut has different characteristic impedance then different ultrasonic knife will be needed. Because the optimum driving frequency of ultrasonic knife is different by characteristic impedance of material. In this work, using a frequency variable ultrasonic transducer made of multi-layered PZT vibrator, a frequency controllable ultrasonic knife will be suggested. The design and computation principles will be also derived. For this work, firstly, the characteristics of this ultrasonic knife will be analyzed by transmission line model equivalent circuit, and the free admittance characteristics and vibrational velocity distributions will be obtained. Secondly, we will design and make the frequency controllable electrical oscillator for driving this ultrasonic knife.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전력기술부문
• /
• pp.121-123
• /
• 2001

This paper presents a fault location algorithm using iterative method at unbalance condition for distribution feeder systems. Distribution feeders include single phase and three phase laterals. The proposed algorithm achieves a high accuracy by continuously updating voltage and current phasor using the phase components and admittance load model.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.729-731
• /
• 2000

This paper presents a simple method for determining the minimum value of capacitance required for initiating self excitation in three-phase self-excited induction generator. Based on the steady-state equivalent circuit model, this paper presents simple and direct method to find the minimum capacitance requirement under R-L load. Using the loop impedance and nodal admittance. the minimum capacitance is determined by self excitation condition. These computed values can be used to predict practically the minimum value of the terminal voltage required for self-excitation. To maintain a constant terminal voltage, a method for determining the frequency, terminal capacitance, and exciting reactance is also described.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 Proceedings ICPE 01 2001 International Conference on Power Electronics
• /
• pp.47-51
• /
• 2001

In this paper, we have explained electrical characteristics of a step-down Rosen type piezoelectric transformer for AC-adapter. When the electric voltage is applied to the driving piezoelectric vibrator polarized in the longitudinal direction, then output voltage is generated at the generating piezoelectric vibrator polarized in the thickness direction due to the piezoelectric effects. From the piezoelectric direct and converse effects, symbolic expressions between the electric inputs and outputs of the step-down piezoelectric transformer have derived with an equivalent circuit model. With the symbolic expressions, load and frequency characteristics have discussed through simulation. Output voltage and current from a 11-layered and a 13-layered piezoelectric transformers were measured under the various conditions of loads and frequencies. First we measured resonant frequency from impedance curve and got equivalent impedance value of the piezoelectric transformer from admittance plot. It was shown from experiments that output voltage has increased and resonant frequency has changed according to various resistor loads. Output current has decreased inversely proportional to changing of loads. Moreover, the measured values of output voltage and current are well agreed with the simulated values of the proposed equivalent circuit model.

• Journal of Power Electronics
• /
• 제3권2호
• /
• pp.139-144
• /
• 2003

In this paper, 11 and 13 layered step-down piezoelectric transformers were fabricated and their electrical characteristics have been analyzed for AC-adapter. When the voltage is applied to the driving piezoelectric vibrator polarized in the longitudinal direction, the output voltage is generated at the generating piezoelectric vibrator polarized in the thickness direction due to the piezoelectric effects. From the piezoelectric direct and converse effects, symbolic expressions between the electric inputs and outputs of the step-down piezoelectric transformer are derived with an equivalent circuit model. With those expressions, load and frequency characteristics are discussed through the simulations. Output voltage and current from a 11-layered and a 13-layered piezoelectric transformers were measured under the different load and frequency conditions. First we measured resonant frequency from impedance curve and got equivalent impedance value of the piezoelectric transformer from admittance plot. It was shown from experiments that output voltage increase s and resonant frequency changes according to the various resistor loads. Output current decreases inversely proportional to the change of loads. Moreover, the measured output voltage and current are well matched with the simulated results obtained from the proposed equivalent circuit model. Furthermore, a new step-down piezoelectric transformer has been suggested to Increase the output power based on a simulation result having a driving piezoelectric vibrator polarized thickness direction.

• International Journal of Control, Automation, and Systems
• /
• 제3권spc2호
• /
• pp.322-333
• /
• 2005

This paper proposes a combination of the Thyristor Controlled Series Capacitor (TCSC) and Static Var Compensator (SVC) installation for enhancing the damping performance of a power system. The developed scheme employs a damping controller which coordinates measurement signals with control signals to control the TCSC and SVC. The coordinated control method is based on the application of projective controls. Controller performance over a range of operating conditions is investigated through simulation studies on a single-machine infinite-bus power system. The linear analysis and nonlinear simulation results show that the proposed controller can significantly improve the damping performance of the power system and hence, increase its power transfer capabilities. In this paper, a current injection model of TCSC is developed and incorporated in the transmission system model. By using equivalent injected currents at terminal buses to simulate a TCSC no modification of the bus admittance matrix is required at each iteration.

• 대한전자공학회논문지TC
• /
• 제41권12호
• /
• pp.93-102
• /
• 2004

본 논문은 개구면 결합 공진기 급전 마이크로스트립 패치 안테나에 대하여 간결하면서도 정확한 등가회로 모델을 추출하기 위한 일반적인 전자기 이론을 제안하였다. 그리고 등가회로는 이상적인 트랜스, 어드미턴스, 그리고 전송선으로 구성된다. 관련소자들의 값은 복소전력 개념, Fourier 변환, Fourier 급수, 그리고 spectral-domain immittance-approach를 적용하여 계산된다. 본 논문에서는 이 방법을 이용하여 안테나의 입력 임피던스를 구하고, 기존 논문에서 발표된 계산값, 그리고 측정값들과 비교하였다. 기존의 연구 결과와의 정확한 일치는 본 논문이 제안한 등가회로 모델의 간결성과 정확성을 입증해 준다.

• 대한전자공학회논문지TC
• /
• 제45권8호
• /
• pp.1-7
• /
• 2008

본 논문에서는 손실을 고려한 Metamaterial(MTM) 전송선의 단일 셀을 구성하고, 이 전송선에서 방사효과를 갖는 파라미터들의 실제 값을 구해본다. 그리고 이 단일 셀을 이용하여 분산 다이어그램을 그려, 여러 셀을 cascade로 연결하여 공진체로 사용하기 위한 조건들을 찾아낸다. 공진체로 사용할 시 종단을 단락 또는 개방을 하게 되는데, 각각의 경우에 따라 공진 주파수를 알아내기 위해 나타나는 입력 임피던스 혹은 입력 어드미턴스에 대해서 논의한다. 이를 이용하여 공진 체의 Quality Factor와 대역폭을 구하였으며, 공진 안테나의 입력 어드미턴스를 회로 시뮬레이션과 EM 시뮬레이션에서 비교하였다. 또한 단일 셀을 이용한 안테나를 설계하여, $0.05\lambda_0\times0.12\lambda_0$의 초소형 안테나로의 설계 시 방사효과 모델링이 어떤 영향을 미치는지 분석하였다.

• 한국전자파학회논문지
• /
• 제15권10호
• /
• pp.1005-1010
• /
• 2004

슬롯 결한 마이크로스트립라인-도파관 천이기에 대해 간략하지만 정확한 등가 회로 모델을 추출하기 위한 해석 방법을 제안한다. 이 등가회로는 이상적 변압기, 마이크로스트립 개방 스터브, 그리고 슬롯 중심에서 도파관 쪽과 급전선 쪽 반평면으로 바라보는 각각의 어드미턴스들로 구성된다. 관련된 회로 변수 값들은 가역 정리 (Reciprocity theorem), 푸리에 변환과 푸리에 급수(Fourier transform and series), 복소 전력 개념(Complex power concept), 파스발 정리(Parceval's theorem), 그리고 스펙트럼 영역 이미턴스 접근법(Spectral-domain immittance approach)에 의해 계산된다. 계산된 산란계수 값을 측정된 값과 비교하였으며 이들 사이의 상당한 일치도는 제안된 등가회로 모델의 간편성과 정확성을 뒷받침한다.