• Journal of Preventive Medicine and Public Health
• /
• 제45권6호
• /
• pp.381-386
• /
• 2012

Objectives: To investigate the link between cigarette smoking and muscle strength in Japanese men. Methods: We used data on 4249 Japanese men, aged $43.3{\pm}13.9$ years, in this cross-sectional investigation study. Grip strength and leg strength were measured as indicators of overall muscle strength. Meanwhile, subjects' cigarette smoking habits were recorded by trained medical staff. The effect of cigarette smoking on muscle strength was evaluated. Results: A total of 1618 men (38.1%) were smokers and 1481 men (34.9%) exercised regularly. Significant differences in muscle strength were noted between men with and without a Brinkman index of 400 or greater, after adjusting for age. After adjusting for age, height, body weight and exercise habits, associations between the Brinkman index and leg strength and the ratio of leg strength to body weight were attenuated. Conclusions: Cigarette smoking might be negatively associated with muscle strength, especially grip strength in Japanese men.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회 2001년도 추계학술대회 논문집
• /
• pp.31-34
• /
• 2001

The customer unsatisfaction in the new products exists, though the most of enterprises using QFD. It is mainly caused by the failure of corrective determination of technical importance rating(TIR). To derive the technical importance rating, the impact of the fulfillment of design requirements on the satisfaction of customer requirements must first be quantified. This has been accomplished through the use of a 1-3-9 or a 1-5-9 scale and ignored the peak of the house of quality(HOQ). In this paper we suggested the methodology reflecting effectiveness among engineering characteristics and adjusting the relationship strength between customer attribute(CA) and engineering characteristic (EC), by using limit probability and PCMR(pairwise comparison and median rank). With using this method, the determination of TIR would be more suitable for the voice of customers objectively. Here negative correlation is ignored.

• 재활복지
• /
• 제22권2호
• /
• pp.213-230
• /
• 2018

본 연구는 청소년의 스마트폰 중독이 증가함에 따라 나타나는 척추 건강에 미치는 영향을 알아보고 인지강도에 따른 척추건강의 조절효과를 알아보고자 실시하였다. 모든 대상자는 스마트 폰 중독 진단 척도, 경추의 전방 기울기 각도(거북목 각도), 그리고 뇌파의 인지감마피크(Cognitive Gamma-Peak)의 진폭변화량을 측정하여 스마트폰 사용 정도, 척추각도, 그리고 인지강도를 측정하였다. 그 결과 스마트폰 사용 정도가 증가할수록 척추각도는 유의하게 증가하였으며(p<.001), 인지강도가 증가할수록 척추각도는 유의하게 감소하였다(p<.01). 또한 인지강도는 스마트폰 사용정도의 상호작용을 통해서도 척추각도에 조절효과를 나타냈다(p<.05). 이러한 결과를 볼 때, 인지강도가 낮을수록 스마트폰 사용정도는 증가하며 이에 따른 척추각도도 증가함을 의미한다. 결국 이 결과는 후기 청소년들에게 인지강도가 중간인 그룹과 낮은 그룹에서 스마트폰 사용 정도가 높아질수록 경추의 전방 기울기 각도(거북목 각도)가 더 증가한다는 것을 알 수 있다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.226-229
• /
• 1999

Epoxy compound has been used as insulation material in electrical equipment for a long time because of its excellent electrical, mechanical and chemical properties. Nowdays, becoming higher voltage system, the properties of interface between epoxy and metal insert become more important. The breakdown voltage of epoxy compound for electric material is variable according to the surface roughness of metal insert. Generally, with metal insert sanding, the adhesion strength is enhanced and the breakdown strength is reduced. But in this study, we knew that the adhesion strength became enhanced but the breakdown strength didn\`t reduced with metal insert sanding. So in this study sanding. So in this study, we suggest the optimum interface condition by adjusting the surface roughness.

• Clinical Nutrition Research
• /
• 제13권1호
• /
• pp.33-41
• /
• 2024

The health benefits of dietary fiber are widely recognized, but its impact on muscle health remains unclear. Therefore, this study aimed to elucidate the relationship between dietary fiber intake and muscle strength through a cross-sectional analysis of data from the Korea National Health and Examination Survey (KNHANES). Data from a single 24-h dietary recall and handgrip strength tests of 10,883 younger adults aged 19 to 64 years and 3,961 older adults aged ≥ 65 years were analyzed. Low muscle strength was defined as handgrip strength < 28 kg for men and < 18 kg for women. Multivariable linear and logistic regression analyses were conducted to determine the association of dietary fiber intake with muscle strength. Approximately 43% of Korean adults met the recommended intake of dietary fiber, and those with higher dietary fiber consumption also had higher total energy and protein intake. After adjusting for confounding variables, dietary fiber intake was found to be positively associated with maximal handgrip strength in younger women aged 19 to 64 years (β = 0.015; standard error [SE] = 0.006) and older men aged ≥ 65 years (β = 0.035; SE = 0.014). For older women aged ≥ 65 years, those in the lowest quartile of dietary fiber intake had a higher risk of low muscle strength than those in the highest quartile after adjustment of confounders (odds ratio 1.709; 95% confidence interval 1.130-2.585). These results suggest that adequate dietary fiber intake may reduce the risk of sarcopenia in older Korean women.

• Journal of the Korean Wood Science and Technology
• /
• 제45권2호
• /
• pp.223-231
• /
• 2017

This work was conducted to investigate on the effect of urea-formaldehyde (UF) resin viscosity on plywood adhesion. The viscosity of UF resin was controlled either by adjusting the condensation reaction during its synthesis to obtain different target viscosities (100, 200 and 300 mPa.s) at two levels of formaldehyde/urea (F/U) mole ratios (1.0 and 1.2) or by adding different amounts (10, 20 and 30%) of wheat flour into the resins for the manufacture of plywood. When the viscosity of UF resin increased by the condensation reaction, the adhesion strength of plywood bonded with UF resin of 1.2 F/U mole ratio consistently increased, while those bonded with the 1.0 F/U mole ratio resin slightly decreased, suggesting a difference in the adhesion in plywood. However, the adhesion strength of plywood decreased as the viscosity increased by adding wheat flour, regardless of F/U mole ratio. The manipulation of UF resin viscosity by adjusting the condensation reaction was much more efficient than by adding wheat flour in improving the adhesion performance of plywood. These results indicated that a way of controlling the viscosity of UF resin adhesives has a great influence to their adhesion in plywood.

• KCI Concrete Journal
• /
• 제14권4호
• /
• pp.139-144
• /
• 2002

Concrete filled FRP tube has lately attracted attention as the member that can substitute the conventional reinforced concrete. Glass fiber and carbon fiber are some of available materials for FRP tube. Carbon tube is filament wound with specified winding angle to meet the appropriate capacity demands. Confinement effect of carbon tube is varied according to winding angle. In this study, a total 4 of large scale circular specimens of 30cm diameter and 60cm height is tested. To estimate the effect of winding angle and thickness of carbon tube on the increased confined compressive strength, the test tube are wound with $\pm45^{\circ}\;and\;\pm30^{\circ}$ with two types of thickness, 2mm and 3mm, respectively. It is shown that effectively increased confined strength and ductility are observed from the specimens with $\pm45^{\circ}$ winding angle than $\pm30^{\circ}$ winding angle. Increasing thickness is not as effective as adjusting winding angle for the confinement of concrete core.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.380-385
• /
• 2014

Clay-based membranes with submicron pore size were successfully prepared by a simple pressing process using low-cost starting materials(e.g., kaolin (K), bentonite (B), talc (T), and sodium borate). The green bodies were sintered at $1000^{\circ}C$ for 2 h in air. The effect of clay-mineral composition on the flexural strength of clay-based membranes was investigated. The porosity of the clay-based membranes could be controlled within the range of 34 - 42% by adjusting the starting composition. The flexural strength of the low-cost membranes depended on both the porosity and the ${\alpha}$-quartz content. In turn, the porosity and ${\alpha}$-quartz content were affected by the (B+T) /(K+B+T) ratio. The plot of strength relative to this ratio, showed a maximum when the ratio was 0.4. The typical flexural strength of these clay-based membranes (with ratio 0.4) was 28 MPa at 34% porosity.

• 소성∙가공
• /
• 제27권2호
• /
• pp.107-114
• /
• 2018

Although the application of high strength steel is increasing to cope with the various updated regulations of automobiles, high strength steel sheets are difficult to formulate due to the high tensile strength and low elongation of those materials. In this study, the slide motion was controlled using a servo press in order to improve the formability of the process of manufacturing ultra-high strength steel of above 1.2GPa. Also, the friction characteristics of the slid motion were investigated through a high speed friction test. The slide motion was optimized by adjusting the number of steps, the rising start position and the rise height of the slide. At the same time, it is noted that the optimal slide motion increased the forming depth by about 40%. From the results of the high speed friction test, the application of the slide motion reduces friction resistance, thereby improving friction characteristics and improving formability.

• 펄프종이기술
• /
• 제32권2호
• /
• pp.16-25
• /
• 2000

The influence of four process parameters of soft nip calendering including calendering pressure, temperature, moisture content and nip residence time on bulk, smoothness and tensile strength of newsprints has been investigated. In addition, the effect of basis weights on calendering responses has been examined. Bulk of newsprints decreased and smoothness increased with the increase of the calendering pressure, temperature, moisture content of the sheets and nip residence time. Improvement in tensile strength was observed when low calendering pressure and high temperature of heat-ing roll were employed. Tensile strength of the newsprint, however, decreased abruptly when the calendering temperature and pressure increased above certain levels due to the rupture of sheet structure, which has been verified by SEM. SEM micrographs also showed that it would be possible to maintain the inner bulk while densifying the fibers on the outer surface of newsprint by adjusting the soft nip calendering variables properly.