• Journal of Preventive Medicine and Public Health
• /
• v.45 no.6
• /
• pp.381-386
• /
• 2012

Objectives: To investigate the link between cigarette smoking and muscle strength in Japanese men. Methods: We used data on 4249 Japanese men, aged $43.3{\pm}13.9$ years, in this cross-sectional investigation study. Grip strength and leg strength were measured as indicators of overall muscle strength. Meanwhile, subjects' cigarette smoking habits were recorded by trained medical staff. The effect of cigarette smoking on muscle strength was evaluated. Results: A total of 1618 men (38.1%) were smokers and 1481 men (34.9%) exercised regularly. Significant differences in muscle strength were noted between men with and without a Brinkman index of 400 or greater, after adjusting for age. After adjusting for age, height, body weight and exercise habits, associations between the Brinkman index and leg strength and the ratio of leg strength to body weight were attenuated. Conclusions: Cigarette smoking might be negatively associated with muscle strength, especially grip strength in Japanese men.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2001.10a
• /
• pp.31-34
• /
• 2001

The customer unsatisfaction in the new products exists, though the most of enterprises using QFD. It is mainly caused by the failure of corrective determination of technical importance rating(TIR). To derive the technical importance rating, the impact of the fulfillment of design requirements on the satisfaction of customer requirements must first be quantified. This has been accomplished through the use of a 1-3-9 or a 1-5-9 scale and ignored the peak of the house of quality(HOQ). In this paper we suggested the methodology reflecting effectiveness among engineering characteristics and adjusting the relationship strength between customer attribute(CA) and engineering characteristic (EC), by using limit probability and PCMR(pairwise comparison and median rank). With using this method, the determination of TIR would be more suitable for the voice of customers objectively. Here negative correlation is ignored.

• 재활복지
• /
• v.22 no.2
• /
• pp.213-230
• /
• 2018

The study looked at the impact on the health of the spine caused by the increasing addiction to smart phones, and examine the moderating effect of adjusting spinal health according to cognitive strength. All subjects used the smartphone by measuring the diagnostic scale of the smartphone addiction, the angle of forward inclination of the cervical spine, and the amplitude variation of the cognitive Gamma-Peak of the brain waves. As a result, as the use of smart phones increases, the spine angle significantly increased (p<0.001), as cognitive strength increased, the spine angle decreased significantly (p<0.01). The cognitive strength also showed the effect of adjusting the spine angle through interaction with the degree of use of a smartphone (p<0.05). This results in a higher degree of smartphone use in lower and middle cognition strength groups, which results in a higher angle of forward tilt in the cervical spine.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.226-229
• /
• 1999

Epoxy compound has been used as insulation material in electrical equipment for a long time because of its excellent electrical, mechanical and chemical properties. Nowdays, becoming higher voltage system, the properties of interface between epoxy and metal insert become more important. The breakdown voltage of epoxy compound for electric material is variable according to the surface roughness of metal insert. Generally, with metal insert sanding, the adhesion strength is enhanced and the breakdown strength is reduced. But in this study, we knew that the adhesion strength became enhanced but the breakdown strength didn\`t reduced with metal insert sanding. So in this study sanding. So in this study, we suggest the optimum interface condition by adjusting the surface roughness.

• Clinical Nutrition Research
• /
• v.13 no.1
• /
• pp.33-41
• /
• 2024

The health benefits of dietary fiber are widely recognized, but its impact on muscle health remains unclear. Therefore, this study aimed to elucidate the relationship between dietary fiber intake and muscle strength through a cross-sectional analysis of data from the Korea National Health and Examination Survey (KNHANES). Data from a single 24-h dietary recall and handgrip strength tests of 10,883 younger adults aged 19 to 64 years and 3,961 older adults aged ≥ 65 years were analyzed. Low muscle strength was defined as handgrip strength < 28 kg for men and < 18 kg for women. Multivariable linear and logistic regression analyses were conducted to determine the association of dietary fiber intake with muscle strength. Approximately 43% of Korean adults met the recommended intake of dietary fiber, and those with higher dietary fiber consumption also had higher total energy and protein intake. After adjusting for confounding variables, dietary fiber intake was found to be positively associated with maximal handgrip strength in younger women aged 19 to 64 years (β = 0.015; standard error [SE] = 0.006) and older men aged ≥ 65 years (β = 0.035; SE = 0.014). For older women aged ≥ 65 years, those in the lowest quartile of dietary fiber intake had a higher risk of low muscle strength than those in the highest quartile after adjustment of confounders (odds ratio 1.709; 95% confidence interval 1.130-2.585). These results suggest that adequate dietary fiber intake may reduce the risk of sarcopenia in older Korean women.

• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.223-231
• /
• 2017

This work was conducted to investigate on the effect of urea-formaldehyde (UF) resin viscosity on plywood adhesion. The viscosity of UF resin was controlled either by adjusting the condensation reaction during its synthesis to obtain different target viscosities (100, 200 and 300 mPa.s) at two levels of formaldehyde/urea (F/U) mole ratios (1.0 and 1.2) or by adding different amounts (10, 20 and 30%) of wheat flour into the resins for the manufacture of plywood. When the viscosity of UF resin increased by the condensation reaction, the adhesion strength of plywood bonded with UF resin of 1.2 F/U mole ratio consistently increased, while those bonded with the 1.0 F/U mole ratio resin slightly decreased, suggesting a difference in the adhesion in plywood. However, the adhesion strength of plywood decreased as the viscosity increased by adding wheat flour, regardless of F/U mole ratio. The manipulation of UF resin viscosity by adjusting the condensation reaction was much more efficient than by adding wheat flour in improving the adhesion performance of plywood. These results indicated that a way of controlling the viscosity of UF resin adhesives has a great influence to their adhesion in plywood.

• KCI Concrete Journal
• /
• v.14 no.4
• /
• pp.139-144
• /
• 2002

Concrete filled FRP tube has lately attracted attention as the member that can substitute the conventional reinforced concrete. Glass fiber and carbon fiber are some of available materials for FRP tube. Carbon tube is filament wound with specified winding angle to meet the appropriate capacity demands. Confinement effect of carbon tube is varied according to winding angle. In this study, a total 4 of large scale circular specimens of 30cm diameter and 60cm height is tested. To estimate the effect of winding angle and thickness of carbon tube on the increased confined compressive strength, the test tube are wound with $\pm45^{\circ}\;and\;\pm30^{\circ}$ with two types of thickness, 2mm and 3mm, respectively. It is shown that effectively increased confined strength and ductility are observed from the specimens with $\pm45^{\circ}$ winding angle than $\pm30^{\circ}$ winding angle. Increasing thickness is not as effective as adjusting winding angle for the confinement of concrete core.

• Journal of the Korean Ceramic Society
• /
• v.51 no.5
• /
• pp.380-385
• /
• 2014

Clay-based membranes with submicron pore size were successfully prepared by a simple pressing process using low-cost starting materials(e.g., kaolin (K), bentonite (B), talc (T), and sodium borate). The green bodies were sintered at $1000^{\circ}C$ for 2 h in air. The effect of clay-mineral composition on the flexural strength of clay-based membranes was investigated. The porosity of the clay-based membranes could be controlled within the range of 34 - 42% by adjusting the starting composition. The flexural strength of the low-cost membranes depended on both the porosity and the ${\alpha}$-quartz content. In turn, the porosity and ${\alpha}$-quartz content were affected by the (B+T) /(K+B+T) ratio. The plot of strength relative to this ratio, showed a maximum when the ratio was 0.4. The typical flexural strength of these clay-based membranes (with ratio 0.4) was 28 MPa at 34% porosity.

• Transactions of Materials Processing
• /
• v.27 no.2
• /
• pp.107-114
• /
• 2018

Although the application of high strength steel is increasing to cope with the various updated regulations of automobiles, high strength steel sheets are difficult to formulate due to the high tensile strength and low elongation of those materials. In this study, the slide motion was controlled using a servo press in order to improve the formability of the process of manufacturing ultra-high strength steel of above 1.2GPa. Also, the friction characteristics of the slid motion were investigated through a high speed friction test. The slide motion was optimized by adjusting the number of steps, the rising start position and the rise height of the slide. At the same time, it is noted that the optimal slide motion increased the forming depth by about 40%. From the results of the high speed friction test, the application of the slide motion reduces friction resistance, thereby improving friction characteristics and improving formability.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.32 no.2
• /
• pp.16-25
• /
• 2000

The influence of four process parameters of soft nip calendering including calendering pressure, temperature, moisture content and nip residence time on bulk, smoothness and tensile strength of newsprints has been investigated. In addition, the effect of basis weights on calendering responses has been examined. Bulk of newsprints decreased and smoothness increased with the increase of the calendering pressure, temperature, moisture content of the sheets and nip residence time. Improvement in tensile strength was observed when low calendering pressure and high temperature of heat-ing roll were employed. Tensile strength of the newsprint, however, decreased abruptly when the calendering temperature and pressure increased above certain levels due to the rupture of sheet structure, which has been verified by SEM. SEM micrographs also showed that it would be possible to maintain the inner bulk while densifying the fibers on the outer surface of newsprint by adjusting the soft nip calendering variables properly.