• Title/Summary/Keyword: Adipate

Search Result 129, Processing Time 0.028 seconds

Fabrication of Antibacterial Biodegradable films Using a Radiation-induced Reduction Method

  • Jung, Chan-Hee;Cho, Yong-Jun;Jung, Jin-Mook;Hwang, In-Tae
    • Journal of Radiation Industry
    • /
    • v.7 no.2_3
    • /
    • pp.141-147
    • /
    • 2013
  • The simple and facile radiation technique of the preparation of antibacterial biodegradable polymer films containing silver nanoparticles (Ag NPs) was described. The biodegradable poly(butylene adipate-co-terephthalate) (PBAT) films containing silver trifluoroacetate (Ag TFA) were prepared by a solvent casting method, and then the films were irradiated by electron beams at the various doses ranging from 20 to 200 kGy to form Ag NPs in the biodegradable polymers. The results of UV-vis and FE-SEM/EDX analyses revealed that the Ag NPs were successfully formed in the PBAT matrix during the electron beam irradiation, and their amounts were dependant on the absorbed dose and Ag TFA concentrations. Furthermore, on the basis of the results of the antibacterial test through disk diffusion and colony counting test, the irradiated PBAT/Ag TFA films exhibited the antibacterial property due to the formation of Ag NPs.

Application of poly(vinyl acetate) and poly(1,4-butylene adipate) hydrophobic surface coatings on cementitious mortar specimens

  • Sanal, Irem;Yalcin, Bestenur;Yalcin, Ibrahim Ertugrul;Arda, Lutfi
    • Advances in concrete construction
    • /
    • v.11 no.4
    • /
    • pp.323-333
    • /
    • 2021
  • The main objective of this study is to characterize and evaluate the hydrophobic performance of polymer-based water-repellent coatings on cementitious mortar surfaces. Different concentrations of poly(vinyl acetate) (PVAc) and poly(1,4-butylene adipate) (PBA) were prepared in the laboratory and their applicability and performance was tested experimentally by water absorption test and analysis of surface contact angles of cementitious mortar specimens. According to the results of this study, it can be stated that incorporation of nano polymer particles on the surface of cementitious mortar specimens can enhance contact angles and reduce water absorption by increasing hydrophobicity. However, a dosage limit exists for polymer materials in coating, and observed hydrophobic improvements decreases when polymer dosage reached beyond the limit. Additionally, it is observed that water absorption of polymer coated cementitious mortars is closely related with the results of surface contact angle.

General Pharmacological Study of CJ-11828, an Amlodipine adipate

  • Choi, Jae-Mook;Lee, Sung-Hak;Kim, Il-Hwan;Park, Jie-Eun;Park, Choong-Sil;Youn, Yong-Sik;Lim, Dong-Kwon;Cho, Sung-Hwan;Chang, Jun-Hwan;Do, Sun-Hee;Kim, Eun-Joo;Kim, Young-Hoon
    • Biomolecules & Therapeutics
    • /
    • v.12 no.2
    • /
    • pp.114-121
    • /
    • 2004
  • This study was undertaken to evaluate the general pharmacological properties of CJ-11828, an amlodipine adipate, in experimental animals and in vitro system. CJ-11828 had no effects on general behavior, motor coordination, writhing syndromes, pentetrazol-induced chemoshock and electric shock in mice at dose levels of 3,10, anti 30 mg/kg, po. But there were decrease of body temperature, prolongation of sleeping time, and inhibition of intestinal activity in mice treated with CJ-11828 at doses of 10 and 30 mg/kg, po. CJ-11828 decreased the blood pressure in coscuous fog at the dose level of 2mg/kg, po, but it was expected as a result of pharmacological activity of CJ-11828. Any effect on respiratory system was not observed in conscious rat at doses of 3,10, and 30 mg/kg, po. The slight decrease in spontaneous motor activity was observed in mice treated with CJ-11828 at high dose, 30 mg/kg. In vitro experiments, CJ-11828 had no effect on agonists-induced contraction of isolated guinea pig ileum at 0.1, 1, and 10 ${\mu}$M. Based on these results, it was concluded that CJ-11828 had no pharmacological effect ill these studies even up to the 36-fold anticipated clinical dose, 3 mg/kg.

Perinatal Phthalate/Adipate Esters Exposure in Rats: Effects on Maternal Body Weight Changes and Developmental Landmarks in Offspring Rats

  • Lee, Hwi-Cheul;Yang, Byoung-Chul;Ko, Yeoung-Gyu;Kim, Dong-Hoon;Park, Jin-Ki;Yang, Boh-Suk;Seong, Hwan-Hoo;Yamanouchi, Keitaro;Nishihara, Masugi
    • Reproductive and Developmental Biology
    • /
    • v.30 no.4
    • /
    • pp.235-245
    • /
    • 2006
  • Di-n-butyl phthalate (DBP), diisononyl phthalate (DINP) and di-(2-ethylhexyl) adipate (DEHA) are ubiquitously distributed chemicals that are widely used as plasticizers and also found at low levels in foods. The aims of this study were to determine whether perinatal exposure to DBP, DINP and DEHA could alter normal patterns of neonatal development. Dams were provided with pulverized soy-free diet containing 20, 200, 2,000 and 10,000 ppm of DBP, 40, 400, 4.000 and 20,000 ppm of DINP, or 480, 2,400 and 12,000 ppm of DEHA from gestational day 15 to postnatal day 21. Exposure to the high doses of DBP, DINP and DEHA during gestational period significantly decreased food consumption and body weight gain of dams. These chemicals reduced neonatal body weight as well as that of the after maturation. Also, exposure to DINP of all the doses used and the higher doses (2,400 and 12,000 ppm) of DEHA decreased AGD at PND 1 in male neonates, though that to DBP did not affect AGD in males. In female neonates, an increase in AGD was observed in DBP- and DINP-exposed animals at the highest doses. Moreover, these chemicals affected survival rate of pups at PND 5, and delayed onset of eye opening in all chemica1-exposed groups at PND 17. These results suggest that perinatal exposure to these chemicals may affect the normal development and/or growth of offspring.

Determination of Phthalic Acid Esters and Adipate in Sediment Samples (저질중의 프탈산 에스테르와 아디피산 분석)

  • Myung, Seung-Woon;Chang, Yoon-Jung;Yoon, Sung-Ho;Cho, Hyun-Woo;Kim, Myung-Soo
    • Analytical Science and Technology
    • /
    • v.15 no.4
    • /
    • pp.360-364
    • /
    • 2002
  • The most common 8 phthalic acid esters (PAEs) and adipate in sediment were measured 5 times from 1999 to 2001 at 11 sites of river in Korea. Ultrasonication extraction with dichloromethane was done for extraction of the sediment. After concentration GC/MS-SIM analysis was performed. Three compounds (DEP, DBP and DEHP) among eight phthalic acid esters were detected from the sediment samples, and the other PAEs were not detected in any samples. DEHP (27.3~63.6%) was detected with higher frequency than any other compounds for sediment samples. And this compound had shown the highest average concentration (81.7~427.6 ng/g).

Adhesion Properties of Moisture-Curable Polyurethane Hotmelt (습기경화형 폴리우레탄 핫멜트의 접착물성)

  • Kim, Jae-Beum;Chung, Kyung-Ho;Chun, Young-Sik;Jung, Jin-Soo;Chang, Young-Wook
    • Elastomers and Composites
    • /
    • v.33 no.4
    • /
    • pp.267-273
    • /
    • 1998
  • Isocyante terminated urethane prepolymers were synthesized by the reaction of 4,4'-dimethyl phenyldiisocyanate(MDI) and ester type polyols such as ethylene glycol/ butanediol adipate(EBA), neopentylglycol/butanediol adipate (NBA) and hexanediol adipate (HA) . All of the NCO-terminated urethane prepolymers are solid at room temperature, but they become mobile enough to be disposed onto a substrate upon heating about $80^{\circ}C$. Subsequently, they are solidified and cured through the reaction with moisture. Tensile behavior of the ore-thane hotmelt exhibits characteristic features depending on the type of polyol. The adhesive strength determined by single lap shear joint is higher in order of HA, NBA and EBA based ore thane hotmelt, which can be correlated with the magnitude of breaking energy of the cured films. The failure mode are cohesive for all cases and the adhesive strength increases as the test is performed faster. This indicates that the strength of the adhesive joint is primarily dependent upon the bulk properties of the adhesives.

  • PDF

The Level of Total Phthalate Esters and Di-(2-ethylhexyl) Adipate in Disposable Sanitary Gloves (일회용 위생장갑에서 Phthalate류 및 Di-(2-ethylhexyl) adipate 분석)

  • Lee, Kwang-Ho;Kwon, Ki-Sung;Kwak, In-Shin;Choi, Jae-Chon;Jeon, Dae-Hoon;Jeong, Dong-Youn;Choi, Byung-Hee;Kim, Sung-Wook;Lee, Sun-Hee;Lee, Chul-Won
    • KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
    • /
    • v.6 no.1
    • /
    • pp.41-46
    • /
    • 2000
  • The level of plasticizer such as diethyl phthalate (DEP), di-n-propyl phthalate (DprP), di-n-butyl phthalate (DBP), di-n-pentyl phthalate (DPP), butylbenzyl phthalate (BBP), di-(2-ethylhexyl) phthalate (DEHP), dicyclohexyl phthalate (DCHP) and di-(2-ethylhexyl) adipate (DEHA) was determined in disposable sanitary gloves. Samples of disposable sanitary gloves were taken at retail shops, and their overall extractions in carbon tetrachloride were measured, after establishment of soxhlet appratus in 6 hours. All of 8 samples of disposable sanitary gloves at retail shops were polyethylene (PE). All of the manufactures was voluntarily labelled their boxes of gloves in line Korea Food Code. The level of phthalate esters and DEHA in all of 8 samples were not exceed the detection limit. The detection limits of DEP, DprP, DBP, DPP, BBP, DEHP, DCHP and DEHA were 1.8, 1.9, 1.3, 1.1, 0.9, 0.7, 2.1 and 0.8 mg/L, respectively.

  • PDF

Determination of hazardous semi-volatile organic compounds in industrial wastewater using disk-type solid-phase extraction and GC-MS (디스크형 고상 추출법과 GC/MS를 이용한 공장폐수 중 반휘발성유기화합물질 분석)

  • Lee, In-Jung;Lim, Tae-Hyo;Heo, Seong-Nam;Nam, Su-Gyeong;Lee, Jae-Gwan;Cheon, Se-Uk
    • Analytical Science and Technology
    • /
    • v.25 no.4
    • /
    • pp.236-241
    • /
    • 2012
  • There are many industrial factories in the central Nakdong river basin and have been occurred water pollution accidents by hazardous chemicals such as phenol, 1,4-dioxane and perchlorate. In this study, ten compounds of semi-volatile organic compounds (SVOCs) (dichlorvos, toluene-2,4-diisocyanate, 4,4'-methylenedianiline, 4,4'-methylenebis (2-chloroaniline), diethyl phthalate, di-n-butyl phthalate, butyl benzyl phthaltate, bis (2-ethylhexyl) adipate, benzophenone, 4,4'-bisphenol A) of hazardous chemicals which may be potentially discharged into the Nakdong river, were determined by gas chromatography-mass spectrometry (GC-MS) with disk-type solid-phase extraction. Accuracy and precision were in the range of 75.6~110.5%, and 4.6~12.7%, respectively and recovery was in the range of 72.4~127.9%. Three compounds (bis (2-ethylhexyl)adipate, benzophenone, 4,4'-bisphenol A) were detected in industrial wastewater such as wastewater treatment plants (WWTPs) and wastewater discharge facilities in the Nakdong River basin.

Improvement of Degrading Activity of Poly(butylene succinateco-butylene adipate)-Degrading Strains Isolated from Soils (토양에서 분리한 Poly(butylene succinate-co-butylene adipate) 분해균의 분해활성 증진)

  • Joo, Hyun-Jin;Kim, Mal-Nam
    • Korean Journal of Environmental Biology
    • /
    • v.27 no.2
    • /
    • pp.198-204
    • /
    • 2009
  • From leaf mold and reclamation site soil of the Capital area of Korea, 3 poly(butylene succinate-co-butylene adipate: PBSA)-degrading strains were isolated through the clear zone test. The PBSA-degrading activities of the strains were assessed by means of a modified Sturm test using 0.01% of PBSA film as a sole carbon source. After the modified Sturm tests for 40 days at the respective isolation temperatures, the 3 strains degraded 30%, 55% and 43% of PBSA, respectively. The isolated strains were identified to be Burkholderia cepacia PBSA-4, Bacillus licheniformisPBSA-5 and Burkholderia sp. PBSA-6 through the 16S rDNA gene sequence analysis. Among them, PBSA-5 degraded both PBSA and Poly(vinyl alcohol). The degradation activity of the PBSA degrading strains appeared to be high at moderate temperatures such as $27^{\circ}C$ and $37^{\circ}C$, and initial inoculum size of $10^{10}cfu\;mL^{-1}$ degraded PBSA 1.2~1.3 more times than that $10^9cfu\;mL^{-1}$. Addition of 0.1 or 0.5% (w/w) of gelatin, yeast extract and ammonium sulfate raised the PBSA degrading activity, and especially addition of 0.1% (w/w) of gelatin enhanced the PBSA degrading activity by more than 33%. The mixed strains degraded PBSA faster than the single strain.