• Polymer(Korea)
• /
• v.33 no.2
• /
• pp.164-168
• /
• 2009

The effects of chemically modified thermoplastic starch (CMPS) on the morphology, thermal and mechanical properties of the blends of poly (lactic acid)(PLA) and poly(butylene adipate-co-terephthalate)(PBAT) were studied. Blends of PLA/PBAT with the CMPS contents of 10, 20 and 30 wt% on the basis of PLA/PBAT weight were prepared by a twin screw extruder. The morphology, thermal and mechanical properties of the blends were examined by using scanning electron microscope (SEM), differential scanning calorimeter (DSC) and a tensile tester. The DSC study revealed that PLA/PBAT blends are thermodynamically immiscible, while the compatibility was much improved by addition of the CMPS.

• Korea-Australia Rheology Journal
• /
• v.17 no.2
• /
• pp.71-77
• /
• 2005

We investigated thermal, rheological, morphological and mechanical properties of a binary blend of poly(lactic acid) (PLA) and poly(butylene succinate adipate) (PBSA). The blends were extruded and their molded properties were examined. DSC thermograms of blends indicated that the thermal properties of PLA did not change noticeably with the amount of PBSA, but thermogravimetric analysis showed that thermal stability of the blends was lower than that of pure PLA and PBSA. Immiscibility was checked with thermal data. The rheological properties of the blends changed remarkably with composition. The tensile strength and modulus of blends decreased with PBSA content. Interestingly, however, the impact strength of PLA/PBSA (80/20) blend was seriously increased higher than the rule of mixture. Morphology of the blends showed a typical sea and island structure of immiscible blend. The effect of the blend composition on the biodegradation was also investigated. In the early stage of the degradation test, the highest rate was observed for the blend containing $80wt\%$ PBSA.

• KSTLE International Journal
• /
• v.2 no.2
• /
• pp.142-145
• /
• 2001

The electrorheology of the chitosan adipnate suspension in silicone oil was investigated. Chitosan adipnate suspension showed a typical ER response (Bingham flow behavior) upon application of an electric field. The shear stress for the chitosan adipnate suspension exhibited a linear dependence on the volume fraction of particles and an electric field power of 1.88. The experimental results for the chitosan adipnate suspension correlated with the conduction models and this suspension was found to be an anhydrous ER fluid.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10a
• /
• pp.7-8
• /
• 2003

Since PVDF/poly(1,4-butylene adipate) blend shows much lower LCST curve compared with PVDF/PMMA blend, the PVDF/PBA blend can be a good candidate for investigating the effect of the electric field on the phase separation and dissolution behavior of an electro-active polymer and electro-inactive polymer blend. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.54-57
• /
• 1998

Recently, Manley's group published several papers on the blend of PVDF and poly(1, 4-butylene adipate) (PBA) chosen as a model system of somicrystallineisemicrystalline polymer blend.[1-4]. This blend system has several advantages over the other PVDF/semicrystalline polymer blends.(omitted)

• Proceedings of the Korean Society of Rheology Conference
• /
• 2006.06a
• /
• pp.179-182
• /
• 2006

• Clean Technology
• /
• v.8 no.4
• /
• pp.223-228
• /
• 2002

The biodegradable Properties of various polyester resins with different chemical structures have been studied by applying the controlled compost test and soil burial test. Celluose was taken as a fully biodegradable reference resin while PVC and PE were empolyed as non-biodegradable reference chains or ester group were rather easily degraded by hydrolase, meanwhile copolymer type polyesters which contain aromatic rings showed relatively low biodegradability. According to the results from controlled compost test, cellulose(the positive reference) showed 70.6% degradation after 45 days, whereas synthetic poly(butylene adipate-co-succinate), poly(butylene succinate), poly(butylene adipate-co-succinate-co-terephthalate) showed 44.0%, 32.0% and 23.4% degradation respectively. In this regard, it was concluded that biodegradable properties of polymers are largely dependant on the chemical structures constituting the polymers.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.399-404
• /
• 2003

Aliphatic polyester, especially poly(butylene adipate)(PBA), is quite biodegradable and one of the most promising polymer materials to be commercialized. Bis(4-hydroxybutyl) adipate (BHBA) formation stage is the first principal process in the production of PBA from adipic acid (AA) and 1,4-butane diol (BD). In this study, we investigated for the effective production of Bis(4-hydroxybutyl) adipate (BHBA), effects of molar ratio of adipic acid (AA) to 1,4-butane diol (BD), catalyst (tetrabutyl titanate, TBT) concentration, and temperature on the reaction rate of esterification between AA and BD were investigated. Initial reaction rate of the esterification decreased with increasing molar ratio of AA to BD and reaction temperature, whereas reaction constant increased with increase in catalyst-concentration. Activation energy values for catalyzed and uncatalyzed esterifications were 198.5 and 94.8 kJ/mol, respectively.

• Polymer(Korea)
• /
• v.39 no.2
• /
• pp.247-255
• /
• 2015

Poly(1,2-propylene glycol adipate) (PPA) was used as an environmentally friendly plasticizer in flexible poly(vinyl chloride) (PVC). Thermal, mechanical, and rheological properties of the PVC/PPA blends were characterized by differential scanning calorimetry, dynamic mechanical analysis, tensile test, scanning electron microscopy and small amplitude oscillatory shear rheometry. The results showed that PPA lowered the glass transition temperature of PVC. The introduction of PPA could decrease tensile strength and Young's modulus of the PVC/PPA blends; however, elongation-at-break was dramatically increased due to the plastic deformation. The plasticization effect of PPA was also manifested by the decrease of dynamic storage modulus and viscosity in the melt state of the blends. The results indicated that PPA had a good plasticizing effect on PVC.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.8
• /
• pp.2560-2566
• /
• 2012

The present study investigates how the thermal stability of retinol (vitamin A) encapsulated in polyester nanoparticles is influenced by the types of polyester used for the nanoparticles. A variety of polyester-retinol nanoparticles were prepared with various polyesters like: poly(ethylene adipate), PEA; poly(butylene adipate), PBA; poly(hexamethylene adipate), PHMA; and three polycaprolactones, PCL, of different molecular weights ($M_n$ ~10, 40, and 80K). The chemical stability of retinol in these nanoparticles, monitored in an aqueous solution at $25^{\circ}C$ and $40^{\circ}C$ for 4 weeks, was high in the following order of the nanoparticles prepared with PHMA > PCL 40K > PCL 10K > PCL 80K > PBA~PEA at $25^{\circ}C$ and PCL 10K > PCL 40K > PHMA > PCL 80K > PEA > PBA at $40^{\circ}C$. More importantly, this study has also found that the thermal stability of the retinol in the nanoparticles was closely connected with the melting temperatures of polyesters and polyester nanoparticles. The results were further discussed with possible factors - such as sample preparation condition (or history) and miscibility between the polyesters and retinol - affecting $T_m$ of the polyesters and the nanoparticles.