• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제30회 춘계학술대회논문집
• /
• pp.203-206
• /
• 2008

본 연구는 고체 추진기관에 적용되는 내열재를 autoclave 방식이 아닌 hot press molding으로 제작하여 연소관에 접착 가능한 상태의 내열재로 제작하는데 초점을 두고 있다. EPDM/kevlar를 기본 조성으로 내열재 원료가 구성되고, 미가류 sheet 상태로 공급된다. 전방 내열재는 금형을 사용하여 preform 상태로 1차 제작하고, boots를 구형하기 위해 두개의 preform 사이에 modified nylon film을 사용하여 제작 하였다. 실린더 부위를 포함하고 있는 후방 내열재는 특별히 설계된 하나의 금형으로 제작되었고, boots 부위는 초경합금 칼날을 가지고 있는 장비에 의해 실현되었다.

• Corrosion Science and Technology
• /
• 제22권2호
• /
• pp.115-122
• /
• 2023

This study aimed to elucidate causes of corrosion of heat transport pipes and air vents installed under a manhole of heat transport facilities and suggest effective anticorrosive measures by applying paints or adhesive tapes. It was found that air vent corrosion was attributed to corrosion under insulation caused by the inflow of water and the enrichment of chloride ions. The infiltrated water caused a hydrolysis of polyurethane foam (PUF) insulation by concentrating chloride ions at the interface between a pipe and the PUF. As insulator deteriorated, more chloride ions were eluted as confirmed by ion chromatograph (IC) analysis. As an effective method to prevent air vent corrosion, different types of paints and adhesive tapes with higher corrosion resistance on chloride ions were applied and environmental resistance tests were performed with those samples. Based on environmental test results of samples exposed to 10% HCl solution, it was revealed that a wax tape was the most adequate from a viewpoint of stability at operating condition, environmental resistance, surface treatment, and field applicability.

• 한국추진공학회지
• /
• 제12권2호
• /
• pp.40-47
• /
• 2008

초음파를 이용한 추진기관의 접착 계면 검사는 결함 검출 능력과 경제성이 우수하다고 알려져 있다. 하지만, 추진기관의 접착 구조는 다중 계면이므로 송신 펄스와 수신 펄스의 시간 간격이 짧아서 반사 신호의 분리가 어렵기 때문에 초음파의 신호 분석에는 많은 시간과 노력이 소요된다. 이런 이유로 추진기관의 초음파시험은 연소관과 내열재 사이의 미접착 결함과 같이 극히 제한된 영역에 대해서만 자동화 시스템으로 수행하고 있다. 본 논문에서는 기존의 초음파시험으로 검출이 불가능했던 라이너와 추진제 미접착 결함을 초음파의 공진 현상과 램파 특성을 이용하여 검출하는 새로운 기법에 대해 기술하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2007년도 제29회 추계학술대회논문집
• /
• pp.55-59
• /
• 2007

초음파를 이용한 추진기관의 접착 계면 검사는 결함 검출 능력과 경제성이 우수하다고 알려져 있다. 하지만, 추진기관의 접착 구조는 다중 계면이므로 송신 펄스와 수신 펄스의 시간 간격이 짧아서 반사 신호의 분리가 어렵기 때문에 초음파의 신호 분석에는 많은 시간과 노력이 소요된다. 이런 이유로 추진기관의 초음파시험은 연소관과 내열재 사이의 미접착 결함과 같이 극히 제한된 영역에 대해서만 자동화 시스템으로 수행하고 있다. 본 논문에서는 기존의 초음파시험으로 검출이 불가능했던 라이너와 추진제 미접착 결함을 초음파의 공진 현상과 램파 특성을 이용하여 검출하는 새로운 기법에 대해 기술하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1140-1142
• /
• 1995

The transformer is fabricated with two piezoelectric vibrator with the divided electrodes and adhesive insulator. We applied the electric input to the driving vibrator in parallel and connect the output voltage to the generating vibrator in series to the resistor load near its fundamental resonance frequency. Then we investigate output voltage in series twice as large as in parallal. Moreover we investigate the load characteristics at resonance frequencies under various resistor and the frequency characteristics near the resonance frequency under no load. Its equvalent circuit is derived from the Mason's model of a thickness-driven piezelectric vibrator. By its equevalent circuit, symbolic expressions for input impedances, voltage ratios, resonance frequencies, and bandwidths have been derived. The values calculated from those symbolic exprssions are shown to agree well with the measurement values.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1283-1288
• /
• 2008

The FPCB is used as the important component of the sliding mechanism of mobile phones. FPCB have been used as jumper cables(fixed wiring) in various types of circuits because of their flexibility and bending property. The dominant failure mode of the FPCB is open that was caused by fatigue. The fatigue is repeated whenever the sliding is open, so it is a mainly cause of FPCB fatigue. We examined the bending-fatigue lifetime of FPCB. we focused on observing the contact resistance degradation of FPCB of mobile phones according to different test condition of bending strain. As a result, it has proved that lifetime decreased by increasing bending strain.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 1998년도 제14회 학술발표회 논문개요집
• /
• pp.77-77
• /
• 1998

Present silicon dioxide (SiOz) 떠m as intennetal dielectridIMD) layers will result in high parasitic c capacitance and crosstalk interference in 비gh density devices. Low dielectric materials such as f f1uorina뼈 silicon oxide(SiOF) and f1uoropolymer IMD layers have been tried to s이ve this problem. I In the SiOF ftlm, as fluorine concentration increases the dielectric constant of t뼈 film decreases but i it becomes unstable and wa않r absorptivity increases. The dielectric constant above 3.0 is obtain어 i in these ftlms. Fluoropolymers such as polyte$\sigma$따luoroethylene(PTFE) are known as low dielectric c constant (>2.0) materials. However, their $\alpha$)Or thermal stability and low adhesive fa$\pi$e have h hindered 야1리ru뚱 as IMD ma따"ials. 1 The concept of a plasma processing a찌Jaratus with 비gh density plasma at low pressure has r received much attention for deposition because films made in these plasma reactors have many a advantages such as go여 film quality and gap filling profile. High ion flux with low ion energy in m the high density plasma make the low contamination and go어 $\sigma$'Oss피lked ftlm. Especially the h helicon plasma reactor have attractive features for ftlm deposition 야~au똥 of i앙 high density plasma p production compared with other conventional type plasma soun:es. I In this pa야Jr, we present the results on the low dielectric constant fluorocarbonated-SiOF film d밑JOsited on p-Si(loo) 5 inch silicon substrates with 00% of 0dFTES gas mixture and 20% of Ar g gas in a helicon plasma reactor. High density 띠asma is generated in the conventional helicon p plasma soun:e with Nagoya type ill antenna, 5-15 MHz and 1 kW RF power, 700 Gauss of m magnetic field, and 1.5 mTorr of pressure. The electron density and temperature of the 0dFTES d discharge are measUI벼 by Langmuir probe. The relative density of radicals are measured by optic허 e emission spe따'Oscopy(OES). Chemical bonding structure 3I피 atomic concentration 따'C characterized u using fourier transform infrared(FTIR) s야3띠"Oscopy and X -ray photonelectron spl:’따'Oscopy (XPS). D Dielectric constant is measured using a metal insulator semiconductor (MIS;AVO.4 $\mu$ m thick f fIlmlp-SD s$\sigma$ucture. A chemical stoichiome$\sigma$y of 야Ie fluorocarbina$textsc{k}$영-SiOF film 따~si야영 at room temperature, which t the flow rate of Oz and FTES gas is Isccm and 6sccm, res야~tvely, is form려 야Ie SiouFo.36Co.14. A d dielec$\sigma$ic constant of this fIlm is 2.8, but the s$\alpha$'!Cimen at annealed 5OOt: is obtain려 3.24, and the s stepcoverage in the 0.4 $\mu$ m and 0.5 $\mu$ m pattern 킹'C above 92% and 91% without void, res야~tively. res야~tively.