• KIEAE Journal
• /
• 제17권3호
• /
• pp.35-44
• /
• 2017

Purpose: This study questioned the efficiency of daylight factor as a daylight adequacy and investigated a method of how to complement its weakness by considering a direct sunlight component under a clear sky condition. Method: The Snowdon visitor centre cafe was chosen as a case study building and various techniques such as BRE formula, BRE sky protractor, Pilkington dot diagram and mock-upscale model under the artificial sky simulator were used to analyse and compare daylight factor values. An analysis of direct sunlight component under the clear sky condition was carried out by Climate Consultant 5.5, sun path diagram, and the artificial sky simulator. Result: The result of daylight factor analysis differed by the adopted techniques and it was also contradictory to the results on a direct sunlight penetration. The result not only showed the limitation of daylight factor as a metric but also suggested an improvement by combining it with direct sunlight analysis. The techniques used in this study had a merit of being applied in the early design stage and thus be beneficial to many design professions in order for early daylight performance analysis.

• Journal of Families and Better Life
• /
• 제24권3호
• /
• pp.27-41
• /
• 2006

The purpose of this study is to investigate the general tendencies and casual relations of demographic variables, consumer alienation, materialism and impulse buying among college students. Three hundred and forty one undergraduate students in Daejeon were participated in this study. Factor analysis, Multiple regression and Path analysis were used as statistical analysis. The major findings are as follows: 1. Consumer alienation of college students was divided into 4 types such as Powerlessness, Meaningless, Normlessness, Cultural Estrangement. The overall level of consumer alienation was 3.36. Normlessness(M=3.70) was the highest, and the lowest was powerlessness(M=2.82). Consumer alienation was influenced by gender, age, subjective level of living. Specifically, the lower the age and the subjective level of living were the higher meaningless and powerlessness respectively. And cultural estrangement was higher in male than female. However, normlessness was not affected by demographic variables. 2. The level of materialism of college students was relatively high(M=3.71). The materialism was affected by gender, age, allowance adequacy. 3. The level of impulse buying was higher than middle point(M=3.29). The results of path analysis showed that gender, age, allowance, allowance adequacy, socio-economic status, subjective level of living, powerlessness, materialism influence on impulse buying direct and indirect.

• Journal of the Korea Fashion and Costume Design Association
• /
• 제21권1호
• /
• pp.47-57
• /
• 2019

The purpose of the study was to explore effective satisfaction factors for continuous partnerships between fashion companies and artists. A questionnaire was developed by the researchers and results were collected from a total of 273 people who were working for a fashion company or working as an artist. Data was analyzed by the use of a frequency test, a reliability test, an exploratory factor analysis and a structure equation model analysis using AMOS 18.0. The results of the study were as follow. First, profitability and adequacy had significant effects, but awareness had no effect on confidence concerning the partnership. Second, awareness and profitability showed significant effects, but adequacy showed no effect on the flow among those in the partnership. Third, confidence had a significant effect on flow. Fourth, among the partnership factors, confidence and flow had significant effects on partnership satisfaction. Fifth, flow showed a significant effect on the intent for a continuous partnership, but confidence showed no effect.

• The Journal of Asian Finance, Economics and Business
• /
• 제8권4호
• /
• pp.727-734
• /
• 2021

The study aims to examine and analyze the factors that affect the return on assets (ROA) by placing net interest margin (NIM) as a moderating variable in influencing ROA. This research was conducted on 27 banks listed on the Indonesia Stock Exchange (IDX) for the period 2015 to 2018 with a total sample data of 91. The data used is a combination of time series data and cross-section data. The sampling technique used was the purposive sampling method. The data analysis technique used was path analysis with multiple regression analysis technique. The results of the analysis showed that the capital adequacy ratio (CAR) and loan to deposit ratio (LDR) have a positive but insignificant effect on ROA. NIM as a moderating variable does not influence the impact of CAR on ROA. However, NIM as a moderating variable is able to influence the impact of LDR on ROA. From the results of this study, it is evident that the LDR will increase the ROA at banks that generate high NIM.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제66권8호
• /
• pp.1172-1180
• /
• 2017

This study analyzed competition in peak load plants between CCGT and GT instead of competition between base and peak load plants like in previous studies. In common overseas power markets, CCGT and GT claim certain market shares as peak load plants with the latter boasting a high utilization rate as reserve plants. In South Korea, however, there has been no introduction of GT in the market that opened in 2001 with no analysis cases of GT's economy as a peak load plant. The current power market of South Korea is run on the cost-based pool, which allows for no price spikes. Since the capacity payment criteria for compensations for missing money are set based on GT generators, the power market uses GT generators as marginal plants. The purposes of this study were to analyze the competitive edge of GT generators as peak load plants in the domestic power market of South Korea and identify the causes of GT's failure in market entry, thus assessing the adequacy of market signals in the domestic power market.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제44권2호
• /
• pp.93-101
• /
• 2021

The purpose of this study is to analyze the adequacy of production capacity of the assembly process system of mobile bath vehicle's top box panel and process design through a simulation analysis. Towards this end, the layout of the facility designed with pre-verification job using a simulation modeling and an experiment, and facility, logistics process, and personnel input method were made into a simulation model, and the design system's adequacy was evaluated through an experiment. To produce 120 mobile bath vehicles annually, it was analyzed that 14 general workers and seven skilled workers were adequate through the experiment. It was also identified that three painting process lines carried out through outsourcing were adequate. Production lead time was 201.7 hours on average and it was 230 hours maximum. To meet customer delivery service level of 95% within the deadline when establishing a customer order and vehicle delivery plan, it was analyzed that more than 215 hours of lead time is needed minimum. If the process cycle time is reduced to 85% upon system stabilization and skillfulness improvement, it was analyzed that annual output of 147 vehicles can be achieved without additional production line expansion.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권12호
• /
• pp.85-93
• /
• 2020

This study aimed to explore the impact of macroeconomic (Real GDP growth (GDPG), Inflation rate (INF)) and bank -specific variables (profitability (ROA), capital adequacy (CADEQ), non-performing loans (NPL), deposit growth (DEPG)) on the liquidity (lIQ) of 13 listed Jordanian commercial banks for the period 2011-2018. Panel data analysis, Pooled least square, fixed effects model and random effects model, Lagrange multiplier test, and Hausman test were used. The random effects model output shows that, macroeconomic variables have a significant impact on Jordanian commercial banks liquidity since inflation has a positive impact while GDPG has a negative impact on banks (LIQ). On the other hand among the bank-specific variables capital adequacy and deposit growth have a positive significant impact on banks (LIQ), while (NPL) and (SIZE) have a negative significant impact on Jordanian commercial banks liquidity. But ROA has a negative insignificant impact on (LIQ). The findings of the study suggest that commercial banks departments need to pay attention to the economic and internal variables of banks in order to maintain acceptable levels of liquidity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.405-411
• /
• 1998

An iterative numerical computational algorithm is presented to design a plate of shell element subjected to membrane and flexural forces. Based on equilibrium consideration, equations for capacities of top and bottom reinforcements in two orthogonal directions have been derived. The amount of reinforcement is determined locally, i. e., for each sampling point, from the equilibrium between applied and internal forces. One case of design is performed for a hyperbolic paraboloid saddle shell (originally used by Lin and Scordelis) to check the design strength against a consistent design load, therefore, to verify the adequacy of design practice for reinforced concrete shells. Based on nonlinear analyses performed, the analytically calculated ultimate load exceeded the design ultimate load from 14-43% for an analysis with relatively low to high tension stiffening, ${\gamma}$ =5~20 cases. For these cases, the design method gives a lower bound on the ultimate load with respect to Lower bound theorem. This shows the adequacy of the current practice at least for this saddle shell case studied. To generalize the conclusion many more designs-analyses are performed with different shell configurations.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• 제27권8호
• /
• pp.60-66
• /
• 2013

The wind-speeds among geographically close wind-farms have high correlations seasonally. This paper presents a novel wind-speed sampling method which sincerely reflects the correlation among wind-speeds of different wind-farms. In the proposed method, the wind-speed samples are generated through the statistical data analysis of the measured past wind-speed data and are adequate to be applied to generation adequacy assessment based on random sampling. In the proposed method, the specific probability distribution need not to be assumed and sufficiently accurate wind-speed samples can be generated based only on the measured past data. The proposed method is applied to the two wind-farm problem to show its applicability.

• Korean Journal of Rural Living Science
• /
• 제10권1호
• /
• pp.33-42
• /
• 1999

The purpose of this study was to empirically verify the influence of variables on leisure participation and leisure satisfaction of single working people and the relative contribution of individual leisure participation and family leisure participation. The subject of this study were 176 single working people in Pusan and interviewed with a questionnaire. The data were analyzed by SPSS/PC＋ program for the frequency, mean, standard deviation, Cronbach'$\alpha$, factor analysis and regression. The major results of this study were as follows : 1. The score of family leisure participation were higher than individual leisure participation. The Level of leisure satisfaction was relatively high. 2. Variables that affect the leisure participation were job, degree of information using and perception level of the adequacy of household income. 3. Variables that affect leisure satisfaction were perception level of the adequacy of household income and individual leisure participation.