• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.97-100
• /
• 2009

A negative waveform was studied to improve the driving characteristics of reset and address periods in ac PDP. Comparative experiments between negative and conventional positive waveforms were performed with 42-inch XGA PDP module. The negative waveform showed lower breakdown voltage than the conventional positive waveform in reset period. Due to its weak and stable discharge during reset period, the contrast ratio was improved by decreasing the black luminance. During address period, the discharge time-lag was measured. The formative time lag ($=T_f$) of negative waveform was improved about 22.8% than $T_f$ of conventional positive waveform.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권2호
• /
• pp.1181-1184
• /
• 2007

The new self-priming addressing driving scheme was proposed to improve an address discharge time lag. It utilizes the priming effect maintaining the priming ramp discharge during an address period and the address discharge time lag is significantly improved. In this study, the basic characteristics of the priming ramp discharge are presented.

• Journal of Information Processing Systems
• /
• 제6권1호
• /
• pp.107-120
• /
• 2010

The Internet has been growing at unprecedented rates. The problem of an address shortage could act as a barrier on this growth. In principle, a new Internet standard, IPv6 solves the problem of the address shortage because it has a very large address space. But IPv6 is not yet compatible with the IPv4 and during the IPv4-to-IPv6 transition period IPv4 address will continue to be in demand. Thus for quite some time, the problem of IP address shortage will persist. To solve the problem, we propose the mechanism of secure IP address trading. This mechanism is based on the Resource PKI (RPKI). The RPKI is the working item of IETF. This proposed mechanism maximizes the trust of IP address trading using RPKI.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 Techno-Fair 및 추계학술대회 논문집 전기물성,응용부문
• /
• pp.214-215
• /
• 2007

Unstable sustain discharges can occur at the bottom cells of the panel at high temperature. To solve this phenomenon, the wall charge variation during an address period was investigated. A test panel of 7.5 inch XGA level was used and one green cell was measured. In order to realize operating condition equal to that of the bottom cells of 50 inch panel, the addressing stress pulses are applied. It seems that the resultant wall charge loss during address period increased with increase of temperature as well as the addressing stress pulse voltage. Therefore it results in unstable discharge during sustain period.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.61-64
• /
• 2002

The discharge characteristics of AC plasma display were investigated as a function of the voltage and the frequency of the pulses applied to the address electrode during sustain period. The maximum sustain voltage of display cell decreased with increasing the frequency of the pulses applied to the address electrode during sustain period. Applying the pulses to the address electrode resulted in improvement of luminance and luminous efficiency at the same time.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2005년도 제28회 학술발표회 초록집
• /
• pp.80-80
• /
• 2005

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제55권5호
• /
• pp.239-244
• /
• 2006

To drive the high-image quality plasma displays of XGA and/or full-HD, we must effectively improve the driving waveform, which get the reset period for the stabilized control of wall charges, the address period to select discharge or non-discharge, and sustain period for luminance in 1 TV-frame, and also the display quality. To accomplish them, the development of the technology for the fast address discharge is required. In this paper, the correlation between the sustain-electrode gap and address discharge characteristics for the high-speed addressing was analyzed using the measurements of dynamic voltage margins. Results showed that the narrower the gap between the sustain electrodes, the narrower the with of the scan pulse became and a dynamic margin of data voltage of 29.2 V was obtained at scan pulse width of $1.0{\mu}s\;and\;V_{ramp}$ of 240 V for driving 4-inch test penal, which the gap between sustain electrodes was $65{\mu}m$.

• 한국통신학회논문지
• /
• 제32권1A호
• /
• pp.101-108
• /
• 2007

센서 네트워크를 위한 IEEE 802.15.4표준에서는 여러 개의 Full Function Device(FFD)들이 독립적으로 송신하는 비컨들간의 충돌 현상이 존재한다. 이러한 비컨의 충돌은 디바이스간의 타임 동기를 잃게 할 뿐만 아니라, 통신 불능 상태까지 이르게 한다. 이를 개선하기 위해IEEE 802.15.4b 표준안에서는 Post Beacon Period(PBP)를 추가로 정의하여 사용하지만, 역시 다단 토폴로지에서는 비컨충돌의 가능성이 존재할 수 있다. 본 논문에서는 이러한 비컨 충돌의 문제점을 해결하기 위해 FFD가 최초 결합 절차 시 코디네이터가 할당하는 Shor Address 값을 이용하여 비컨 송신 시기를 스스로 결정하는 새로운 비컨 정렬 방식을 제시하였으며, NS-2를 이용하여 제시된 방식의 비컨 충돌 회피 과정을 모의 실험하였다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.756-759
• /
• 2003

We measure the spatiotemporal wall charge distributions on sustain and address electrodes during reset period in an ac PDP cell using the longitudinal electro-optic amplitude modulation method. We apply several reset waveforms like as ramp, exponentially growing and high voltage pulse, and compare the wall charge characteristics on address electrode as well as sustain electrodes for each reset waveforms.

• Journal of Information Display
• /
• 제3권4호
• /
• pp.13-18
• /
• 2002

In general, the background light that is produced during the reset period deteriorates the dark room contrast ratio in AC PDP. In this paper, we propose a modified ramp reset pulse that can reduce the background light to an imperceptible level. In the new reset waveform, the discharges between the scan and sustain electrodes are minimized by applying a positive bias voltage to the sustain electrode and only the weak discharges between the scan and address electrodes are found to occur during the reset period. We also adopted the MgO coated phosphor layer to improve the address voltage margin that was reduced when the bias voltage in the modified ramp reset waveform was applied. As a result, the address voltage margin of 45 V which is the same level of the conventional method was ortained and the dark room contrast ratio was improved up to 7500 : 1.