• 전기화학회지
• /
• 제18권1호
• /
• pp.7-16
• /
• 2015

전기도금공정을 이용하여 상온에서 제조된 Cu박막의 특성에 미치는 피로인산구리용액의 화학성분($Cu^{2+}$ 농도, $K_4P_2O_7$ 농도, 첨가제 농도)의 영향에 대한 연구를 수행하였다. 전류효율은 도금용액의 $Cu^{2+}$ 농도가 0.3 M까지 높아짐에 따라 거의 100%까지 증가하는 경향을 나타내었다. $K_4P_2O_7$ 농도는 1.5~1.8 M 농도에서 전류효율의 감소를 나타내었으나, 0.9~1.3 M과 2.1~2.4 M에서는 거의 100%의 전류효율을 나타내었다. 첨가제의 농도 변화는 전류효율에는 거의 영향을 미치지 않았다. 전기도금 된 Cu 박막의 잔류응력은 도금용액의 $Cu^{2+}$ 농도가 0.15 M 이하에서는 약 20 MPa로 측정되었으나, $Cu^{2+}$ 농도가 증가함에 따라 증가하다가 0.25 M 에서 약 120 MPa의 최대치를 나타내었다. 한편 도금용액의 $K_4P_2O_7$ 농도가 0.9 M로부터 2.4M로 증가할수록 잔류 응력은 80MPa로부터 0 MPa까지 감소하는 경향을 나타내었으며, 첨가제의 농도는 잔류응력에 영향을 미치지 않은 것으로 관찰되었다. 표면형상의 경우 $Cu^{2+}$ 농도와 $K_4P_2O_7$ 농도는 상당한 영향을 미쳤으나, 첨가제는 약간의 영향만을 나타내었다. XRD 분석 결과 $Cu^{2+}$ 농도와 $K_4P_2O_7$ 농도는 Cu 박막의 미세조직에 상당한 영향을 미쳤으나, 첨가제는 거의 영향을 미치지 않는 것으로 나타났다. $Cu^{2+}$ 농도와 $K_4P_2O_7$ 농도가 증가할수록 (111) 피크의 강한 우선방향성이 나타내었다.

• Tribology and Lubricants
• /
• 제19권3호
• /
• pp.159-166
• /
• 2003

This research for replacement of chlorine or sulfur based EP(extreme pressure) -additives which is restricted materials by environmental regulation. The subject of this study is as follows, 4-ball test and friction coefficient test were experimented in accordance with temperature and velocity, compounding with several organic or inorganic metallic elements. After 4-ball test, wear area of steel ball was analysed by SEM-EDX. As the analysis, organic and inorganic elements make a effect for extreme pressure lubricity. It is shown that the friction coefficient of lubricant which includes chlorine or sulfur additives, the scoring phenomenon is found accord-ing to temperature and the scuffing phenomenon at 200$^{\circ}C$. Applying to Na, P, S, Zn, Ca based on inorganic and organic elements, the result showed that friction coefficient is decreased more and more, as increasing temperature of lubricant. The additive based on S, Cl, P elements is effect far extreme pressure in the sample#1 and Na, P, S, Zn, Ca in sample #2. These elements are environmental contaminants and S, Cl based on EP additives which are very popular in domestic industry, when they are properly composed with non-chlorine based on additives and Na, P, S, Zn, Ca organic or inorganic elements. It is showed that lubricity and excellent anti-wear properties.

• 펄프종이기술
• /
• 제43권5호
• /
• pp.60-67
• /
• 2011

Hemicelluloses pre-extracted from Korean mixed wood chip were investigated as a wet-end additive. Hemicelluloses dissolved in hot water and alkali solution were isolated by ethyl alcohol precipitation from pre-extractives. They showed molecular weight of 9,000 ~ 27,000 g/mol as revealed by size exclusion chromatography. The reduction of molecular weight through hot water extraction was caused by autohydrolysis. Chemical composition of the hemicelluloses were analyzed with high-performance liquid chromatography and UV-Vis spectroscopy. As the surface charge of isolated hemicelluloses were negative, the adsorption of hemicelluloses onto softwood unbleached kraft pulp fiber was promoted by poly-DADMAC. The physical properties of handsheets increased as the molecular weight of hemicellulose increased. On the other hands, the optical property decreased with hemicellulose adsorption.

• 한국자기학회지
• /
• 제15권3호
• /
• pp.198-201
• /
• 2005

전기도금 방법으로 제작된 니켈과 니켈-구리 합금박막에 미치는 유기첨가제(organic additive)의 영향을 조사하였다. 유기첨가제를 가하여 도금하는 니켈 박막의 경우 순수한 전해액만을 이용하여 도금한 박막과는 다른 결정성을 갖는다 도금조건을 일정하게 한 후 니켈-구리의 합금 박막용 전해액에 유기첨가제를 가하면 구리와 니켈의 조성비율이 변화하는데 유기첨가제의 성분과 농도에 따라 니켈의 함유율이 $65\~95\%$ 영역에서 조절이 가능하다. 유기첨가제에 의한 이러한 물성의 변화는 자성의 변화를 유도하여 도금 박막의 자기저항의 증가와 감소에도 기여하는 것으로 나타났다.

• 한국식품조리과학회지
• /
• 제25권3호
• /
• pp.387-394
• /
• 2009

This study was performed to determine the quality characteristics of Jeungpyun with the addition of soy yogurt (0%,3%, 6%, 9%, 12%). The proximate composition analysis showed that moisture contents of Jeungpyun were 49.87${\sim}$51.60%, and crush protein, lipid and ash contents were 2.58%, 0.21${\sim}$0.33% and 0.58${\sim}$1.05%, respectively. The pH ofJeungpyun was higher as the additive increased. Volume and symmetry index were higher as the additive increased, but uniformity index was no significant difference. L value and a value were the lowest in control group and increased with soy yogurt addition, while b value was decreased as amount of soy yogurt. Hardness, cohesiveness, gumminess were the highest in 9% group, springiness was the lowest in 9% group. In surface structure of Jeungpyun observed by SEM, cell size was the smallest and the cell uniformity was most regular in 12% group. According to sensory evaluation, appearance, taste and overall acceptance were highest in Jeungpyun with 9% soy yogurt. Therefore, Jeungpyun containing 9% soy yogurt was most preferable.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.522-531
• /
• 2003

Samples with the nominal composition, B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{\delta}}$ high- $T_{c}$ superconductors containing MgO as an additive were fabricated by a solid-state reaction method. Samples with MgO of 5~30 wt% each were sintered at 820~86$0^{\circ}C$ for 24 hours. The structural characteristics, critical temperature, grain size and image of mapping with respect to MgO contents were analyzed by XRD(X-Ray Diffraction), SEM(Scanning Electron Microscope) and EDS(Energy dispersive X-ray spectrometer) respectively. As MgO contents increased, intensity of MgO Peaks and ratio of Bi-2212 phase in superconductors intensified and the proportion of the phase transition from Bi-2223 to Bi-2212 was increased.

• 한국전기전자재료학회논문지
• /
• 제16권6호
• /
• pp.538-548
• /
• 2003

We studied effects by Re$_2$O$_3$(R=Dy, Gd, Ho) addition on the properties of Mn-Zn ferrite. The doping concentration range from 0.05 wt% to 0.25 wt%. All samples were prepared by standard fabrication of ceramics. With increasing the rare earth oxides, specific density and initial permeability increased on the whole. But, the tendencies such as upper result had the measured value on limitation and characteristics saturated or decreased properties after that. In case of excessive addition of additive beyond some level, initial permeability properties of ferrite have gone down in spite of anomalous grain. With increasing the content of additive, both the real and imaginary component of complex permeability and the magnetic loss (tan$\delta$) increased. Because the increased rate of real component had higher than imaginary component, magnetic loss increased none the less for increasing the real component related with magnetic permeability. But, the magnetic loss of ferrite doped with the rare earth oxides was lower than that of Mn-Zn ferrite at any rate. The small amount of present rare earth oxides in Mn-Zn ferrite composition led to enhancement of resistivity in bulk, and more so in the grain boundary. It was seem to be due to the formation of mutual reaction such as between iron ions and rare earth element ions.

• Journal of Chest Surgery
• /
• 제24권7호
• /
• pp.669-673
• /
• 1991

Fructose-l, 6-diphosphate as an additive to cold crystalloid cardioplegia [St. Thomas sol.] was studied prospectively in 60 patients undergoing open heart surgery from January 1, 1991, to June 30, 1991. Thirty patients received cardioplegia with FDP[group I ] and 30 patients received cardioplegia without FDP [group II ]. There were no differences between two groups pre-operatively with regard to age, heart disease, cross-clamp time, cardiac enzymes, or hemodynamic measurements [p>0.05]. Cardiopulmonary bypass was established using ascending aorta and vena cava cannulation employing moderate systemic hypothermia [30oC nasopharyngeal temperature] and hemodilution All patients received cardioplegia through the aortic root at aortic root pressure of 80mm Hg. The composition of the cardioplegic solution and its delivery were identical in both groups except for the addition of FDP[1.5 mg/mL] in group I. The cardioplegic infusate consisted of St. Thomas Hospital solution. The initial dose was infused through the aortic root. Topical myocardial cooling with saline slush was employed in all patients. Recorded operative data were cardiopulmonary bypass and cross-clamp times, amount of cardioplegic infusate. Blood samples for assessment of lactate dehydrogenase [LDH], creatine kinase [CK] and transaminases [GOT, GPT] were obtained before and at 1,2,3,7th postoperative period. Better myocardial protection effect was noted in group I than group II with respect to the % change of cardiac enzymes, although the differences were not significant. We conclude that FDP is a safe additive to crystalloid cardioplegia and may be beneficial in open heart surgery patients.

• 한국세라믹학회지
• /
• 제43권8호
• /
• pp.472-478
• /
• 2006

The effect of compositional and processing variables on a nitriding reaction of silicon powder compact and subsequent post sintering of RBSN (Reaction-Bonded Silicon Nitride) was investigated. The addition of a nitriding agent enhanced nitridation rate substantially at low temperatures, while the formation of a liquid phase between the nitriding agent and the sintering additives at a high temperature caused a negative catalyst effect resulting in a decreased nitridation rate. A liquid phase formed by solely an additive, however, was found to have no effect on nitridation for the additive amount used in this research. The original site of a decomposing pore former was loosely filled by a reaction product ($Si_3N_4$), which provided a specimen with nitriding gas passage. For SRBSN (Sintered RBSN) specimens of high porosity, only a marginal dimensional change was measured after post sintering. Its engineering implication for near-net shaping ability is discussed.

• 자원리싸이클링
• /
• 제12권1호
• /
• pp.18-24
• /
• 2003

무전해 Ni-Cu-B 폐 도금액의 재사용에 대해 소정의 조건에서 조사하였다. 아연화처리한 후 니켈 촉매의 처리는 니켈 촉매처리를 하지 않았을 때 보다 도금시간이 연장되었다. Batch type에서 새로 제조한 도금액에 폐 도금액을 40% 첨가하여도 무전해 Ni-Cu-B 폐 도금액의 재사용이 가능하였다. 새로 제조한 도금액에 소모된 도금액의 성분을 연속적으로 보충하여 도금하면(continuous type), 보충하지 않았을 경우(batch type) 보다 도금시간이 6배 연장되었다. 새로 제조한 도금액에 폐 도금액 40%를 첨가하여 소모된 도금 액의 성분을 연속적으로 보충할 경우(continuous type)의 도금시간은 보충하지 않았을 경우(continuous type)의 도금시간 보다 2배 연장되었다. 도금층의 불량과 급격한 도금속도의 감소는 도금층의 Ni과 Cu의 성분 변화에 큰 영향을 미쳤다.