• Applied Chemistry for Engineering
• /
• v.29 no.6
• /
• pp.740-745
• /
• 2018

The synthesis and characterization of amorphous calcium phosphate (ACP) nanoparticles were reported in this work. We show that relatively monodisperse ACP nanoparticles with a size of sub-100 nm can be prepared by a hydrothermal reaction of calcium chloride ($CaCl_2$) and disodium adenosine triphosphate ($Na_2ATP$) in the presence of sodium phytate as an additive. Their compositions and structures were confirmed using a series of material characterization techniques. Our results exhibit that ACP nanoparticles synthesized using sodium phytate enhanced the stability of maintaining their amorphous nature and prevented from a conversion to crystalline hydroxyapatite (HAP). ACP nanoparticles with the improved stability have potential uses in biomaterial applications in regenerative medicine.

• Analytical Science and Technology
• /
• v.12 no.6
• /
• pp.509-514
• /
• 1999

The systematic modification of titanium(IV) isopropoxide with acetic acid as a organic additive was done and identifided by FT-IR, $^1H$, $^{13}C$ NMR and UV-Vis spectroscopy. The structure was cbanged after hydrolysis-condensation reaction and drying process. The hydrolysis-condensation rates of modified Ti alkoxide with acetic acid were investigated by $^1H$ NMR spectroscopy. This modified Ti(IV) alkoxide was less reactive toward hydrolysis-condensation reaction than $Ti(OPr^i)_4$, which can be attributed to the stable ligand structure between Ti alkoxide and ligand. The structural change on obtained from gel powders with heat treatment was also observed by FT-IR spectroscopy.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.1
• /
• pp.63-68
• /
• 2000

GroEL is well known as a molecular chaperone. In order to determine the dynamic stress response of the Escherichia coli groE promoter, a groE-lacZ operon fusion in the chromosome was constructed. Stress leading to ${\sigma}^{32}$ synthesis induces transcription from E. coli groE promoter, since the promoter is ${\sigma}^{32}-regulated$. When the strain was stressed with ethanol, phenol, and sodium chloride, clear inductions of ${\beta}-galactosidase$ were observed. Two types of simultaneous stresses of sodium chloride and phenol induced the enze much more than either of the two alone, suggesting that stress was an additive. The combined stress resulted in the highest induction of the enzyme in this system. The groE-lacZ fusion strain developed in this study can conveniently be used to detect other harmful pollutants in the environment. Stress treatment of cells containing recombinant proteins, which need GroEl, by ethanol, phenol, or sodium chloride, might have a tendency to increase their biological activities.

• Microbiology and Biotechnology Letters
• /
• v.48 no.3
• /
• pp.358-365
• /
• 2020

An organic solvent- and bleach-stable protease-producing strain was isolated from a polluted river water sample and identified as Aeromonas veronii OB3 on the basis of biochemical properties (API 20E) and 16S rRNA sequence analysis. The strain was found to hyper-produce alkaline protease when cultivated on fish waste powder-based medium (HVSP, 4080 U/ml). The biochemical properties and compatibility of OB3 with several detergents and additives were studied. Maximum activity was observed at pH 9.0 and 60℃. The crude protease displayed outstanding stability to the investigated surfactants and oxidants, such as Tween 80, Triton X-100, and H₂O₂, and almost 36% residual activity when incubated with 1% SDS. Remarkably, the enzyme demonstrated considerable compatibility with commercial detergents, retaining more than 100% of its activity with Ariel and Tide (1 h, 40℃). Moreover, washing performance of Tide significantly improved by the supplementation of small amounts of OB3 crude protease. These properties suggest the potential use of this alkaline protease as a bio-additive in the detergent industry and other biotechnological processes such as peptide synthesis.

• Korean Chemical Engineering Research
• /
• v.47 no.6
• /
• pp.669-675
• /
• 2009

A study has been made on the preparation of liquid resin of non-solvent and non-discoloration type for replacement of the soft PVC at room temperature. A new synthetic process was developed by structure-control design of polyurethane synthesis using pre-polymer and polyols as curing agent. The optimum recipe was made according to macro-glycols, molecular weight and reaction conditions, and the final products indicated that the mechanical properties such as tensile strength, tear strength and flexibility was very excellent than PVC products. Also, viscosity, hardness and color operations of the final products can be controlled by this system. And yellowing property by UV and NOx gas was improved from the various additive experiment.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.12
• /
• pp.2299-2302
• /
• 2007

A series of quaternary ammonium-based ionic liquids (ILs) containing an alkyl carbonate group on the cation was first prepared and their physical and electrochemical properties including density, viscosity, thermal stability, electrochemical stability, and ionic conductivity were reported. These ILs exhibited wide electrochemical windows of at least 5.0 V and relatively high conductivities. In contrast to dialkyl-substituted ionic liquids, the ILs with an alkyl carbonate group on the cation showed much smaller drop in conductivities when mixed with a lithium salt, due to the interaction of lithium ions with carbonate groups. Upon interaction with a Li salt, the carbonyl stretching frequency of the carbonate group shifted to a lower frequency whereas the peak associated with C-O single bond moved to a higher frequency.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.7
• /
• pp.615-620
• /
• 2002

In the case of immobilizing of glucose oxidase into polypyrrole (PPy) using electrosynthesis, the glucose oxidise (GOx) forms a coordinate bond with the polymers backbone. However, because of intrinsic insulation and net-chain of the enzyme, the charge transfer and mass transport are obstructed during the film growth. Therefore, the film growth is dull. We synthesized enzyme electrodes by electropolymerization added some organic solvent, such as ethanol and tetrahydrofuran (THF). The formative seeds of film growth was delayed by adding ethanol. The delay was induced by radical transfer between ethanol and pyrrole monomer. The radical transfer reactions shared the contribution of dopants between electrolyte anion and GOx polyanion. This led to increase amount of immobilized the enzyme in PPy. For the UV absorption spectra of synthetic solution before synthesis and after, in the case of ethanol added, the optical density was slightly decreased for the GOx peaks. It suggests amount of GOx in the solution was decreased and amount of GOx in the film was increased.

• Membrane and Water Treatment
• /
• v.6 no.5
• /
• pp.351-363
• /
• 2015

To increase the surface hydrophilicity of PVDF membranes, in this paper, an electric enhancing method was adopted to treat PVDF nascent membranes during the phase inversion process. It was found that when PEG 600 was taken as the additive, the surface water contact angle of the PVDF membrane treated under 2 kV electric field was decreased from $84.0^{\circ}$ to $65.7^{\circ}$. The reason for the surface elements change of the PVDF membranes prepared under the electric field was analyzed in detail with the dielectric parameters of the polymer dope solutions. Results from BSA adsorption experiment showed that the antifouling ability of the external electric field-treated membranes was distinctly enhanced when compared with that of the untreated membranes. The amount of BSA adsorbed by the treated membranes was lower by 38-43%. Compared with the common chemical reaction methods to synthesize hydrophilic additives or membrane materials, the electric field-assisted processing method did not involve any additional chemical synthesis process and it was capable of realizing better hydrophilicity.

• Journal of Microbiology and Biotechnology
• /
• v.8 no.3
• /
• pp.229-236
• /
• 1998

6-Substituted derivatives of 1-［(2-hydroxyethoxy)methyl］-6-(phenylthio)thymine (HEPT) were synthesized by introducing alkyl groups with the aid of chlorotrimethylsilane, and then purified ranging 40 to 81 % of yield. Because of their peculiar structures, we presumed that HEPT derivatives would contain extra biological activities other than their already known anti-human immunodeficiency viral (HIV -1) activities. In this study, we investigated the possible effects of the HEPT derivatives on bacterial growth and found their selective antibiotic activities against gram-positive strains. We could not observe the corresponding activity from a disc-zone test, but confirmed the activity by liquid cultivation. Since the growth rate of cells was easily recovered, the antibiotic function was suggested to be bacteriostatic. We also suggested that the intracellular fate of HEPT derivatives would be fast. A HEPT derivative f-3 was shown to synergize unidirectionally toward chloramphenicol (Chr). With 0.1 mM f-3, the Chr-directed growth-inhibitory curve appeared 4 hours earlier than found without the additive. Interestingly, from the data of SDS-polyacrylamide gel electrophoresis (PAGE), we found that a membrane-bound protein having a molecular weight of 70-kDa was overexpressed by f-3 in S. aureus.

• Journal of Powder Materials
• /
• v.23 no.4
• /
• pp.276-281
• /
• 2016

Carbonyl iron (CI) is successfully incorporated as an additive into a polystyrene (PS) matrix via a highenergy ball milling method, under an n-hexane medium with volume fractions between 1% and 5% for electromagnetic interference shielding applications by the combination of magnetic CI and an insulating PS matrix. The morphology and the dispersion of CI are investigated by field emission scanning electron microscopy, which indicates a uniform distribution of CI in the PS matrix after 2 h of milling. The thermal behavior results indicate no significant degradation of the PS when there is a slight increase in the onset temperature with the addition of CI powder, when compared to the as-received PS pellet. After milling, there are no interactions between the CI and the PS matrix, as confirmed by Fourier transformed infrared spectroscopy. In this study, the milled CI-PS powder is extruded to make filaments, and can have potential applications in the 3-D printing industry.