• Korean Journal of Head & Neck Oncology
• /
• v.12 no.1
• /
• pp.43-46
• /
• 1996

An unusual case of nodal metastases from thyroid neoplasm known as parapharyngeal space mass is likely to be overlooked. And identification of the primary lesion by excisional biopsy calls for a secondary operation. Therefore, it is important to be aware of the possible lymphatic spread of the thyroid neoplasm to the parapharyngeal space. In this case, completion thyroidectomy should be considered. Here, we present a case of thyroid papillary carcinoma masquerading as a parapharyngeal space tumor. The mass was removed by transcervical approach and pathologically diagnosed as a metastatic thyroid papillary carcinoma. Successful results were obtained after additional completion thyroidectomy.

• Journal of Astronomy and Space Sciences
• /
• v.35 no.2
• /
• pp.105-109
• /
• 2018

El $Ni{\tilde{n}}o$ is the largest fluctuation in the climate system, and it can lead to effects influencing humans all over the world. An El $Ni{\tilde{n}}o$ occurs when sea surface temperatures in the central and eastern tropical Pacific Ocean become substantially higher than average. We investigated the change in sea surface temperature in the Pacific Ocean during the El $Ni{\tilde{n}}o$ period of 2015 and 2016 using the advanced very-high-resolution radiometer (AVHRR) of NOAA Satellites. We calculated anomalies of the Pacific equatorial sea surface temperature for the normal period of 1981-2010 to identify the variation of the 2015 El $Ni{\tilde{n}}o$ and warm water area. Generally, the warm water in the western tropical Pacific Ocean shifts eastward along the equator toward the coast of South America during an El $Ni{\tilde{n}}o$ period. However, we identified an additional warm water region in the $Ni{\tilde{n}}o$ 1+2 and Peru coastal area. This indicates that there are other factors that increase the sea surface temperature. In the future, we will study the heat coming from the bottom of the sea to understand the origin of the heat transport of the Pacific Ocean.

• Journal of Korean Association for Spatial Structures
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2020

In the era of the Fourth Industrial Revolution, Various attempts are being made to converge new industries with IT industry to find new growth engines in the field of IT, maximizing efficiency in terms of productivity. 3D printers are also related to this, and various studies have been conducted worldwide to utilize them in the construction industry. At present, there is an active effort to study atypical structures using 3D printers. The most widely used method is the use of glass panels, however, the additional cost of the manufacturing process and thus the overall project cost cannot be ignored. In addition, the construction of the curvature of the existing two-way curved surface in the conventional flat joint method is not suitable for implementing an amorphous shape. In this paper, we propose an optimized shape through Abaqus analysis of various shapes of Space Truss interior using 3D printing technology using polymer.

• Korean Institute of Interior Design Journal
• /
• v.24 no.2
• /
• pp.117-124
• /
• 2015

With the modern society approaching, a lot of new paradigms have been created which can be explained by the existing space notions while suspicions on the true essence and existence of space have been raised. Ontology regards as the beginning the cause for a 'Field' which will be faced for the research of the essence of a space where 'being-in-the-world' exists. This study has analyzed the existing method of space construction in the spatial thinking and works of Peter Zumthor who mentioning ontological viewpoint as the physiological background of his works so that the ontological spatial concept may be clarified. The following is the study results. First, in order to construct the structures of his own designing into a 'Field' for experiencing the existential meaning, Zumthor chose a reductive pattern with the entire additional elements removed. The materials leading the subjects to call attention to memory and experience and the methods dealing with it enables the realization of various spatial essences. Second, the ontological event-system is required for the formation of relationship among beings. He tried to create a spatial meaning by introducing external environment into the inside and using the materials reflecting regional features and phenomenological empiricism through the multisensory experience. Third, he applied assimilation/insert/adjustment/formative change as the way of constructing the relationship between site and structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.387-388
• /
• 2006

This article provides a dynamic analysis model for huge marine engine that examined analytically variation effects of frequency response by fitting of transverse stays such as hydraulic type. First, vibration analysis using the three dimensional finite element models for the huge marine engine has performed in order to find out the dynamic characteristics. Second, three dimensional finite elements model for the huge marine engine was modifued so that generate forcing nodes in crosshead part and top bracing nodes in cylinder frame part. Third, a system matrix and output matrix was derived for the general siso(single input single out) state space model. Finally, developed state space model for the three dimensional finite elements model for the huge marine engine without the additional modifying process.

• International Journal of Aeronautical and Space Sciences
• /
• v.12 no.3
• /
• pp.283-287
• /
• 2011

Science and Technology Satellite-3 (STSAT-3) is a 150 kg class micro satellite based with the national space program. The STSAT-3 system consists of a space segment, ground segment, launch service segment, and various external interfaces including additional ground stations to support launch and early operation phases. The major ground segment is the ground station at the Satellite Technology Research Center, Korea Advanced Institute of Science and Technology site. The ground station provides the capability to monitor and control STSAT-3, conduct STSAT-3 mission planning, and receive, process, and distribute STSAT-3 payload data to satisfy the overall missions of STSAT-3. The ground station consists of the mission control element and the data receiving element. This ground station is designed with the concept of low cost and high efficiency. In this paper, the requirements and design of the ground station that has been developed are examined.

• Carbon letters
• /
• v.16 no.1
• /
• pp.25-33
• /
• 2015

The prime objective of this research was to study the influence of hot-pressing pressure and matrix-to-reinforcement ratio on the densification of short-carbon-fiber-reinforced, randomly oriented carbon/carbon-composite. Secondary objectives included determination of the physical and mechanical properties of the resulting composite. The 'hybrid carbon-fiber-reinforced mesophase-pitch-derived carbon-matrix' composite was fabricated by hot pressing. During hot pressing, pressure was varied from 5 to 20 MPa, and reinforcement wt% from 30 to 70. Densification of all the compacts was carried at low impregnation pressure with phenolic resin. The effect of the impregnation cycles was determined using measurements of microstructure and density. The results showed that effective densification strongly depended on the hot-pressing pressure and reinforcement wt%. Furthermore, results showed that compacts processed at lower hot-pressing pressure, and at higher reinforcement wt%, gained density gradually during three densification cycles and showed the symptoms of further gains with additional densification cycles. In contrast, samples that were hot-pressed at moderate pressure and at moderate reinforcement wt%, achieved maximum density within three densification cycles. Furthermore, examination of microstructure revealed the formation of cracks in samples processed at lower pressure and with low reinforcement wt%.

• The Bulletin of The Korean Astronomical Society
• /
• v.41 no.1
• /
• pp.44.1-44.1
• /
• 2016

In this paper, we present a catalogue of the spectra of bright stars observed during the sky survey using the Far-Ultraviolet Imaging Spectrograph (FIMS), which was designed primarily to observe diffuse emissions. By carefully eliminating the contamination from the diffuse background, we obtain the spectra of 70 bright stars observed for the first time with a spectral resolution of $2-3{\AA}$ over the wavelength of $1370-1710{\AA}$. The far-ultraviolet spectra of an additional 139 stars are also extracted with a better spectral resolution and/or higher reliability than those of the previous observations. The stellar spectral type of the stars presented in the catalogue spans from O9 to A3. The method of spectral extraction of the bright stars is validated by comparing the spectra of 323 stars with those of the International Ultraviolet Explorer (IUE) observations.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.175-177
• /
• 2006

According to the recommendation of International Maritime Organization, the Ministry Of Maritime Affairs and Fisheries (MOMAF) of Korea provides the real time Differential Global Positioning System service using maritime radio beacon from 1999. Due to the benefit of DGPS service, the need of this system is increased from various user groups for acquiring the better accuracy and integrity. Therefore, MOMAF has extended their service to inland by installing the additional 6 DGPS stations. This nationwide DGPS service will be fully deployed at 2007. In addition to the extension of service area, MOMAF has a plan to upgrade their nationwide DGPS to High Accuracy Nationwide DGPS (HANDGPS). The planned HANDGPS service of Korea will be a kind of long range RTK or Wide Area RTK techniques to provide under 1m accuracy and start their service from 2009 using the various broadcasting and communication media like as radio beacon, Wibro, Digital Multimedia Broadcasting, High Speed Packet Data Access. The introduction of nationwide DGPS system of Korea and its evolution plan will be addressed in this paper. The research activities related with HANDGPS in Korea is also presented.

• Nuclear Engineering and Technology
• /
• v.49 no.6
• /
• pp.1125-1134
• /
• 2017

In this paper, we present a new multilevel in space and energy diffusion (MSED) method for solving multigroup diffusion eigenvalue problems. The MSED method can be described as a PI scheme with three additional features: (1) a grey (one-group) diffusion equation used to efficiently converge the fission source and eigenvalue, (2) a space-dependent Wielandt shift technique used to reduce the number of PIs required, and (3) a multigrid-in-space linear solver for the linear solves required by each PI step. In MSED, the convergence of the solution of the multigroup diffusion eigenvalue problem is accelerated by performing work on lower-order equations with only one group and/or coarser spatial grids. Results from several Fourier analyses and a one-dimensional test code are provided to verify the efficiency of the MSED method and to justify the incorporation of the grey diffusion equation and the multigrid linear solver. These results highlight the potential efficiency of the MSED method as a solver for multidimensional multigroup diffusion eigenvalue problems, and they serve as a proof of principle for future work. Our ultimate goal is to implement the MSED method as an efficient solver for the two-dimensional/three-dimensional coarse mesh finite difference diffusion system in the Michigan parallel characteristics transport code. The work in this paper represents a necessary step towards that goal.