• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6B
• /
• pp.569-578
• /
• 2002

This paper proposes a new multicarrier code division multiple access (CDMA) system. The proposed multicarrier CDMA system provides the advantages that the transmission bandwidth is more efficiently utilized by using divided spreading sequence, time and frequency diversity is achieved in frequency selective nultipath (acting channel, and inter-carrier interference (ICI) can be minimized by using specific data and code pattern. In this system, transmitted data bits are serial-to-parallel converted to some parallel branches. On each branch each bit is direct-sequence spread-spectrum modulated by divided spreading sequences and transmitted using orthogonal carriers. The receiver providers a Rake for each carrier, and the outputs of Rakes are combined to get time and frequency diversity. This multicarrier CDMA system allows additional flexibility in the choice of system parameters. Upon varying system parameters, bit error rate (BER) performance is examined for the proposed multicarrier CDMA system. Simulation results show that the proposed multicarrier CDMA scheme can achieve better performance than the other types of conventional multicarrier CDMA systems.

• Journal of Internet Computing and Services
• /
• v.4 no.5
• /
• pp.51-60
• /
• 2003

Asynchronous iteration is a way to reduce performance degradation of some parallel algorithms due to load imbalance or transmission delay between computing nodes, which requires asymmetric communication between the nodes of different speeds. To implement such asynchronous communication on distributed memory systems, we suggest an MPMD method that creates an additional separate server process on each computing node, and compare it with an SPMD method that creates a single process per node.

• KIEAE Journal
• /
• v.15 no.6
• /
• pp.57-62
• /
• 2015

Purpose: This study, which is based on the investment payback periods, aims to suggest the proper insulation level which can be adapted to the Defense Military Facility Criteria regarding the military residential condominiums. For the energy performance simulation, it is required to collect the residential data regarding the military condominiums and climatic data concerning the regions they belongs to. The estimates through energy performance simulation are the regional heating loads and the heating transmission coefficients of building components. Method: With the heating loads, the annual heating cost saving per square meters is assessed. With the heating transmission coefficients of building components, the additional insulation installment cost per square meters is evaluated. With two outcomes, one as an annual value and the other as a present value, the investment payback period is calculated. Result: In result, it could be concluded that 55~70% insulation ratio can lead a superior residental environments as well as be contributed to the national policy associated with zero-energy buildings because the estimated investment payback period is shorter than the life span of the military residental condominiums. This upshot can be used as a foundation to enactment the Defense Military Facility Criteria associated with military residential condominiums.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.419-428
• /
• 2015

Multipath routing technique is recognized as one of the effective approaches to improve the reliability of data forwarding. However, the traditional multipath routing focuses only on how many paths are needed to ensure a desired reliability. For this purpose, the protocols construct additional paths and thus cause significant energy consumption. These problems have motivated the study for the energy-efficient and reliable data forwarding. Thus, this paper proposes an energy-efficient cooperative multipath routing protocol with a small number of paths based on an inter path communication. The inter path communication (namely, cooperative multipath routing) in the proposed protocol helps to reinforce the multipath reliability and reduce the use of network resources. In addition, the proposed protocol provides a reliable end-to-end transmission time by using a transmission recovery method based on the local decision for the path or transmission failures.

• International Journal of Internet, Broadcasting and Communication
• /
• v.10 no.3
• /
• pp.59-64
• /
• 2018

A cooperative spectrum sensing has been proposed to improve the sensing performance in cognitive radio (CR) network. However, cooperative sensing causes additional overhead for reporting the result of local sensing to the fusion center. In this paper, we propose a technique to reduce the overhead of data transmission of cooperative sensing for applying the quantum data fusion technique in cognitive radio networks by omitting the lowest quantized in the local sensed results. If a CR node senses the lowest quantized level, it will not send its local sensing data in the corresponding sensing period. The fusion center can implcitly know that a spectific CR node sensed lowest level if there is no report from that CR node. The goal of proposed sensing policy is to reduce the overhead of quantized data fusion scheme for cooperative sensing. Also, our scheme can be adapted to all quantized data fusion schemes because it only deal with the form of the quantized data report. The experimental results show that the proposed scheme improves performance in terms of reporting overhead.

• Information and Communications Magazine
• /
• v.15 no.7
• /
• pp.75-94
• /
• 1998

In this paper, HFC CATV networks are introduced. HFC CATV networks are currently considered as a most effective and plausible solution for subscriber access networks in the information superhighway, among others such as ADSL and B-WLL. The advantages of HFC CATV networks include its broad upstream and downstream channel bandwidths, much wider than PSTN's and its readiness. The HFC CATV networks are already well spread among the general subscribers in Korea. This fact will shorten the installation period and significantly reduce its cost. In addition, The structure and channel environment of the HFC CATV networks are introduced. At the same time, in this paper included are major problems in the HFC CATV networks and the solutions for these problems. Also discussed are data transmission, medium access control, IEEE802.14, and MCNS for standardizations. Moreover, additional telecommunications service activities in both Korea and other countries, using HFC CATV networks are also included. The topics which are covered in detail are the ones such as interoperation between HFC CATV networks and trunk line and the digital transmission performance test for the CATV networks. In the performance test, it is concluded that HFC CATV networks can satisfy the QoS for various additional services if the number of the subscribers in a cell is limited to less than 500 and other minor requirements are satisfied. Based on all these discussions and conclusions, HFC CATV networks are suggested in this paper for the subscriber access networks of the so called information superhighway.

• Journal of the Korean Solar Energy Society
• /
• v.40 no.5
• /
• pp.1-12
• /
• 2020

To assess the performance and characteristics of colored building-integrated photovoltaic (BIPV) modules, a comparative assessment of empirical performance was conducted on colored BIPV modules (gray, blue, and orange) and general BIPV module. These modules were installed on the south-facing slope (30°) for comparative assessment through a field test. Monitoring data were collected every 10 min from December 20, 2019 to January 21, 2020 and used to performance and characteristics analysis. Performance ratio and module efficiency were utilized during performance indexing for comparative assessment. For general BIPV modules, the operational efficiency was analyzed at 16.63%, whereas for colored BIPV modules, 13.70% (gray), 15.12 % (blue), and 14.49% (orange) were analyzed. It was discovered that the efficiency reduction caused by transmission losses owing to the application of colored cover glasses were 17.74% (gray), 9.05% (blue), and 9.86 % (orange), under field testing conditions. These values turned on an additional 7% reduction in efficiency for gray BIPV modules, compared to the degradation resulting from transmission drop (gray: 10.87%, blue: 8.99%, and orange: 9.02%) calculated using the efficiency of each module in standard test conditions (STC). Performance ratio analysis resulted in the following values: 0.92 for general BIPV modules, and 0.85 (gray), 0.91 (blue), and 0.91 (orange) for colored BIPV modules. As demonstrated by the above results, modules with a colored cover glass may differ in their operational performance depending on their color, unlike general modules. Therefore, in addition to the performance evaluation under STC, additional factors of degradation require consideration through field test.

• Journal of Korea Multimedia Society
• /
• v.19 no.4
• /
• pp.689-705
• /
• 2016

This paper proposed an realtime total monitoring platform for various kind of multi weather radars to analyze and predict weather phenomenons and prevent meteorological disasters. Our platform is designed to process each weather radar data on each radar site to minimize overloads from conversion and transmission of large volumed radar data, and to set observers up the definitive radar data via public framework server separately. By proposed method, weather radar data having different spatial or temporal resolutions can be automatically synchronized with there own spatio-temporal domains on public GIS platform having only one spatio-temporal criterion. Simulation result shows that our method facilitates the realtime weather monitoring from weather radars having various spatio-temporal resolutions without other data synchronization or assimilation processes. Moreover, since this platform doesn't require some additional computer equipments or high-technical mechanisms it has economic efficiency for it's systemic constructions.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.132-140
• /
• 2003

In this paper, we propose a new scheme for view-dependent transmission of three-dimensional (3-D) polygonal mesh models with hierarchial partitioning. In order to make a view-dependent representation of 3-D mesh models, we combine sequential and progressive mesh transmission techniques. By setting higher priorities to visible parts than invisible parts, we can obtain good qualify of 3-D models in a limited transmission bandwidth. In this paper, we use a multi -layer representation of 3-D mesh models based on hierarchical partitioning. After representing the 3-D mesh model in a hierarchical tree, we determine resolutions of partitioned submeshes in the last level. Then, we send 3-D model data by view-dependent selection using mesh merging and mesh splitting operations. By the partitioned mesh merging operation, we can reduce the joint boundary information coded redundantly in the partitioned submeshes. We may transmit additional mesh information adaptively through the mesh spritting operation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1542-1550
• /
• 2015

Delayed ACK is an algorithm implemented to decrease the number of ACK transmissions by delaying an ACK transmission and by waiting for additional ACK instead of transmitting the ACK immediately. By using Delayed ACK in TCP, the congestion of network and the overhead of handling ACKs can be reduced. Waiting time of Delayed ACK is defined as the Delayed ACK timeout, and it is fixed in Window OS basically. However, the fixed value of Delayed ACK timeout is not suitable for dynamic network circumstance, and it may cause unnecessary delay. This paper proposes a regulating Delayed ACK timeout algorithm to reduce the aforementioned unnecessary delay caused by the lengthy default value of the Delayed ACK timeout. We confirm that TCP transmission performance in dynamic network circumstance can be improved using the proposed algorithm.