• 한국소음진동공학회논문집
• /
• 제12권3호
• /
• pp.195-203
• /
• 2002

In the engine room and the aft part areas of the ship, there exist so many tank structures contacting with fresh water or sea water or oil. If these structures exhibit excessive vibrations during the sea trials, it takes a lot of cost, time and effort to improve vibration situation because the reinforcement work requires emptying the fluid out of the tanks, additional welding and special painting. It is therefore very important to predict a precise vibration characteristics of the tank structures at the design stage, however it is not easy to estimate vibration characteristics of the structures because of difficulties for accurate evaluation of the added (or virtual) mass effect due to the fluid inside the tank. In this paper, numerical and experimental approaches have been performed to present same fundamental data necessary for anti-vibration design of tank structures contacting with fluid, by investigating vibration behaviors of rectangular tank structure for various water depths.

• 한국자동차공학회논문집
• /
• 제8권1호
• /
• pp.163-171
• /
• 2000

The aim this study is to provide fundamental informations for the development of magneticfluid damper. To achieve the aim. the damping effect of magneticfluid is investigated by experiments that the diameter of inner circular bar and the input amplitude vary in the magnetic field generated by the permanent magnet and the electromagnet. From the study, the following conclusive remarks can be made. As the diameter of inner circular bar and the input amplitude increase. the damping effect is improved. And we can know that as the contact area between inner circular bar and magneticfluid increases, damping ratio is improved. Also we consider the cases that there is magnetism generated by electromagnet and DC voltage is supplied to electromagnet from 10V to 50V by 10V. In these cases, the amplitude ratio decreases sharply from 1.8 1.0 And for these cases, the damping ratio is .745.

• 대한한방소아과학회지
• /
• 제15권1호
• /
• pp.183-194
• /
• 2001

Purpose : This Study was conducted to find out whether Gwakhyangjunggi-san gamibang has effects on obesity. Method : Before and after medication, we measured height, weight, Bioelectrical Impedance and calculate BMI, and obesity index from 9 obese children who participated in '2001 the 2nd Hur-jun children contest' sponsored by Kyunghee Oriental Medical Center and compared them. Results and Conclusions : 1) After medication, there was reduction of weight, but it has no statistical significance. 2) After medication, there was statistical significant reduction of BMI, obesity index. 3) After medication, there was statistical significant reduction of total fat weight and the percentage of body fat, and significant increase of muscle mass. As above statement, Gwakhyangjunggi-san gamibang has effects on obesity with significant and it is considered that additional and complement study is needed.

• 항공우주시스템공학회지
• /
• 제4권4호
• /
• pp.28-36
• /
• 2010

Current tanks have been developed to increase mobility and firepower, and its maximum range and destructive power are improved. This great change causes remained vibration of a gun barrel after firing. For this reason, people are trying to control vibration of gun barrel effectively. This thesis presents a modeling method and analysis results for gun barrel by using a thermal shroud as an absorber mass. DTS(Dynamically Tuned Shroud) is a vibration damping system using a thermal shroud as an added mass for decreasing remained vibration. The model has an advantage that the gun barrel's vibration can be decreased by dissipating a kinetic energy of thermal shroud without install an additional dynamic absorber to tip of the gun barrel. For analyzing the damping performance of the DTS, We derived an equation of motion of the barrel after setting a mathematical modeling, and found out the frequency analysis and tendency according to stiffness ratio between barrel and shroud.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.368-372
• /
• 2009

The trace polymer and additives in used stripper solutions were analyzed by a combination of Py-GC/MS and ESI-MS. In the comparison of the pyrolysates produced by the pyrolysis of the pure stripper and photoresist at $500{^{\circ}C}$, the presence of novolac polymer in the used stripper was confirmed by the presence of the characteristic peaks of its pyrolysates, such as those of the methylphenol, di-methylphenol and methylenebis(methylphenol) isomers. The intact trace polymer was measured by ESI-MS, which showed the distribution of oligomers at intervals of 120 Da, indicating di-methylphenol to be the repeat unit. Additional MS/MS measurements demonstrated that the end group is methylphenol and the repeat groups are di-methylphenol. Some modified oligomers caused by the methylation or di-methylation of the repeat unit were also identified. Although the polymer is only present at a trace level in the used stripper, these combined analytical methods provided the means to qualify the stripper solution through the identification and structural determination of the polymer.

• 천문학회지
• /
• 제19권1호
• /
• pp.33-49
• /
• 1986

Radial distribution of internal density has been determined for thirteen subclouds in the three giant molecular cloud complexes accompanying Mon OB1, Mon OB2 and CMa OB1 associations, We modeled their radial density structures with the density distribution of isothermal gas spheres. Most of the subclouds, nine out of the thirteen, are well described by isothermal spheres of single component; while the rest four require an additional component. Total mass and potential energy of each subcloud are also derived from the radial density structure; thermal energy and internal velocity dispersion required for sustaining the density structure are deduced from the isothermal gas model. Our derived masses of the clouds are comparable to the values determined by Blitz (1978) under LTE assumption. This agreement suggests that the correction factor for non-LTE effect on mass-estimate is not far from unity. The ratio of the gravitational potential energy to the kinetic energy of thermal motion is as large as 250; hence the thermal motion alone cannot support these clouds against the gravity. Being supported by turbulence motion with velocities of six to seven times the thermal velocity, the clouds of one-component type seem to be in equilibrium with the gravity; while the clouds of two-component type are likely to be in the stage of gravitational collapse.

• 천문학논총
• /
• 제30권2호
• /
• pp.237-240
• /
• 2015

Classical novae (CNe) are interacting binary systems whose outbursts are powered by a thermonuclear runaway in accreted material onto the surface of a white dwarf (WD). The secondary star in such systems fills its Roche lobe and material is transferred onto the WD primary star via an accretion disk. Recurrent novae (RNe) show many similarities to CNe, but have had more than one recorded outburst. RNe play an important role as one of the suspected progenitor systems of Type Ia supernovae, which are used as primary distance indicators in cosmology. Thus, it is important to investigate the nature of their central binary systems to determine the relation between the parameters of the central system and the outburst type, and finally ascertain the population of novae that might be available to give rise to the progenitors of Type Ia SNe. A low outburst amplitude is adopted as a criterion that may help distinguish RNe from CNe and was therefore used to select targets for observations from ground-based observatories including the Liverpool Telescope and the Southern African Large Telescope as well as the full-sky space-based archive of the Solar Mass Ejection Imager (SMEI). We found that at least four objects currently classified as CNe are possibly RNe candidates based on their quiescent spectra. We also searched the SMEI archive for additional outbursts of bright CNe that might otherwise have been missed but did not find a conclusive example.

• 한국초전도ㆍ저온공학회논문지
• /
• 제16권2호
• /
• pp.64-69
• /
• 2014

Measuring an exact amount of remaining cryogenic liquid propellant under microgravity condition is one of the important issues of rocket vehicle. A Pressure-Volume-Temperature (PVT) gauging method is attractive due to its minimal additional hardware and simple gauging process. In this paper, PVT gauging method using liquid nitrogen is investigated under microgravity condition with parabolic flight. A 9.2 litre metal cryogenic liquid storage tank containing approximately 30% of liquid nitrogen is pressurized by ambient temperature helium gas. During microgravity condition, the inside of the liquid tank becomes near-isothermal condition within 1 K difference indicated by 6 silicon diode sensors vertically distributed in the middle of the liquid tank. Helium injection with higher mass flow rate after 10 seconds of the waiting time results in successful measurements of helium partial pressure in the tank. Average liquid volume measurement error is within 11% of the whole liquid tank volume and standard deviation of errors is 11.9. As a result, the applicability of PVT gauging method to liquid propellant stored in space is proven with good measurement accuracy.

• Journal of Microbiology and Biotechnology
• /
• 제7권6호
• /
• pp.417-422
• /
• 1997

Recombinant Bacillus subtilis LKS88[pASA240] containing the amylase gene from Streptomyces albus KSM-35 was exploited in fed-batch cultivation for mass production of maltotetraose-producing amylase. The effects of dissolved oxygen, additional organic nutrients (peptone and yeast extract) and mixed carbon sources (glucose plus soluble starch) on amylase production were examined in fed-batch operations in an effort to determine the optimum conditions for a maximum amylase productivity. Under the optimum conditions, maximum amylase activity was about 4.2 times higher than that obtained in batch cultivations, indicating that mass production of maltotetraose-producing amylase could be accomplished in fed-batch cultivation of the recombinant B. subtilis strain.

• 터널과지하공간
• /
• 제30권1호
• /
• pp.63-75
• /
• 2020

터널 발파의 최외곽에서 발생할 수 있는 과대 여굴은 작업자 및 장비의 안전에 저해되며 숏크리트 등 지보량의 증가로 공사 비용이 증가시키는 주요 원인이다. 이러한 여굴은 화약 에너지와 암반의 특성 간의 복잡한 발생 메커니즘으로 인해 완벽한 제어가 매우 어렵다. 본 연구는 여굴 발생의 중요한 원인인 암반의 공학적 특성 중 무지보 막장 상태, 단축압축강도, 풍화도 및 불연속면의 특성(빈도, 상태 및 불연속면과 최외곽선과의 각도) 등과 발생한 여굴의 깊이와의 관계를 feed-forward 인공신경망을 통해 분석하였다. 이를 통해 통해 얻어진 각 인자의 가중치를 기초로 여굴저항도(Overbreak Resistance Factor: ORF)를 개발하였다. 더불어 여굴저항도를 이용한 터널 발파 여굴 관리 시스템을 제안한다.