• 농업과학연구
• /
• 제46권4호
• /
• pp.907-914
• /
• 2019

Ammonia (NH₃) that reacts with nitric or sulfuric acid in the air is the major culprit contributing to the formation of fine particulate matter (PM_2.5). NH₃ volatilization mainly originates from nitrogen fertilizer and livestock manure applied to arable soil. Cation exchange capacity (CEC) of peat moss (PM) and zeolite (ZL) is high enough to adsorb ammonium (NH₄⁺) in soil. Therefore, they might inhibit volatilization of NH₃. The objective of this study was to compare the effect of PM and ZL on NH₃ volatilization from upland soil. For this, a laboratory experiment was carried out, and NH₃ volatilization from the soil was monitored for 12 days. PM and ZL were added at the rate of 0, 1, 2, and 4% (wt wt^-1) with 354 N g m^-2 of urea. Cumulative NH₃-N volatilization decreased with increasing addition rate of both materials. Mean value of cumulative NH₃-N volatilization across application rate with PM was lower than that with ZL. CEC increased with increasing addition rate of both materials. While the soil pH increased with ZL, it decreased with PM. Increase in CEC resulted in NH₄⁺ adsorption on the negative charge of the external surface of both materials. In addition, decrease in soil pH hinders the conversion of NH₄⁺ to NH₃. Based on the above results, the addition of PM or ZL could be an optimum management to reduce NH₃ volatilization from the soil. However, PM was more effective in decreasing NH₃ volatilization than ZL due to the combined effect of CEC and pH.

• 한국토양비료학회지
• /
• 제49권5호
• /
• pp.429-433
• /
• 2016

Adsorption and precipitation of cadmium (Cd) could be dependent on rate of P addition and Cd level in soil. Therefore, the objective of this study was to examine how addition rate of P affect mechanisms of Cd immobilization such as adsorption and precipitation in different levels of Cd in soil. Arable soils were spiked with inorganic Cd ($CdCl_2$) to give a total Cd concentration of 10, 100, and $1,000mg\;Cd\;kg^{-1}$. Monopotassium phosphate ($KH_2PO_4$, MPP) was selected as phosphate material and mixed with the pretreated arable soil at the rates of 0, 800, 1,600 and $3,200mg\;P\;kg^{-1}$. The mixture soils were incubated at $25^{\circ}C$ for 8 weeks in dark condition. Soil pH decreased with increasing MPP addition rate in all levels of Cd but negative charge of soil increased, thereby reducing 1 M $NH_4OAc$ extractable Cd. Soil solutions were undersaturated with respect to $CdCO_3$ and $Cd_3(PO_4)_2$ with all P addition rate in soil with low Cd level (${\leq}100mg\;Cd\;kg^{-1}$) but supersaturated in soil with high Cd level ($1,000mg\;Cd\;kg^{-1}$). From the above results, Cd solubility was controlled by precipitation of Cd minerals such as $CdCO_3$ and $Cd_3(PO_4)_2$ in soil with high Cd level but by Cd adsorption induced by increase in negative charge of soil with low level of Cd.

• 열처리공학회지
• /
• 제26권5호
• /
• pp.241-247
• /
• 2013

Hardenability and mechanical properties of boron-bearing steels containing C, Mo and Cr were investigated in this study. Using quench dilatometer, the steel specimens were cooled down to room temperature at different cooling rates to construct continuous cooling transformation diagrams and then the transformation products from austenite were examined. A critical cooling rate was introduced as an index to quantitatively evaluate the hardenability. The C addition to boron-bearing steels did not significantly affect hardenability compared to boron-free steels although it increases the hardenability. With the same content, the Mo addition largely increased the hardenability of boron-bearing steels than the Cr addition because it decreased both the transformation start and finish temperatures at low cooling rates. In particular, the Mo addition completely suppressed the formation of eutectoid ferrite even at the slow cooling rate of $0.2^{\circ}C/s$, whereas the Cr addition nearly suppressed it at the cooling rates above $3^{\circ}C/s$.

• 대한기계학회논문집A
• /
• 제25권1호
• /
• pp.54-60
• /
• 2001

This study is to investigate the mechanical properties and the fatigue crack propagation of fire resistance steel for frame structure as the chemical composition was changed by addition of N, B and rolled end temperature was varied. We used two kinds of specimen, the one is parallel and the other is perpendicular to the rolling directions. As rolled end temperature increased, volume fraction of ferrite and pearlite decreased, but volume fraction of baintie and grain size increased. Micro-hardness decreased as rolled end temperature increased, but tensile and yield strength increased. Volume fraction of ferrite and pearlite decreased by addition of N. But volume fraction of bainite, tensile and yield strength increased. Microstructure was changed to martensite by addition of B, and tensile and yield strength increased. Fatigue life of TL direction specimen was shorter than that of LT direction specimen. There was no significant effect to fatigue crack propagation rate by addition of N and changing rolling condition, but fatigue life was increased by addition of B.

• 한국자동차공학회논문집
• /
• 제15권6호
• /
• pp.159-164
• /
• 2007

The purpose of this study is to reduce harmful emission gases in the range of stable combustion without loss of a thermal efficiency. Therefore, effects of both exhaust gas recirculation(EGR) and synthetic gas addition on engine performance and emission were investigated in a gasoline engine. Synthetic gas(syngas), which is in general prepared from reforming gasoline, was utilized in order to promote stable combustion. The major components of syngas are H2, CO and $N_2$ gases. The percentage of syngas addition was changed from 0 to 30% in energy fraction and EGR rate was varied up to 30%. As a result, $COV_{IMEP}$ as a parameter of combustion stability was decreased and THC/$NO_X$ emissions were reduced with the increase of syngas addition. And $COV_{IMEP}$ was increased with the increase of EGR but $NO_X$ emission was greatly reduced. In addition, under the region where the EGR rate is around 20%, thermal efficiency was improved.

• 대한기계학회논문집B
• /
• 제28권1호
• /
• pp.9-15
• /
• 2004

$CO_2$ is a well-known green house gas as well as the major source of global warming. Many researchers have studied to reduce $CO_2$ emission in combustion processes. Among the method for reducing $CO_2$ emission, oxygen-enriched combustion has been proposed. Because its adiabatic flame temperature is relatively too high, existing facilities must be changed or the flame temperature in the combustion zone should be reduced. The combustion characteristics, composition in the flame zone, temperature profile and emission gases were investigated experimentally for the various oxygen-enriched ratios(OER) by the addition of $CO_2$, under constant $O_2$ flow rate. Results showed that the reaction zone was quenched and broadened as the addition of $CO_2$ was increased. The emission of NOx in flue gas was decreased as decreasing temperature in reaction zone. It was also shown that the reaction was delayed by the cooling effect. As the addition of $CO_2$ was increased, the composition of CO in the flame zone was increased due to the increase of reaction rate by increasing mixing effect of oxidant/fuel at OER=0％, but the composition of CO was decreased by quenching effect at OER=50％ and 100％.

• 한국세라믹학회지
• /
• 제35권12호
• /
• pp.1316-1322
• /
• 1998

The amount of VC and C/N ratio in Ti(CN) was varied to investigate the effect of VC addition on the mi-crostructural change in Ti(CN)-Ni system. As the amount of VC addition increases in Ti(C0.7N0.3)-20Ni sys-tem a complete solid solution was observed in Ti(C0.7N0.3)-20Ni-25VC system. It implies that the ratio of the dissolution rates of Ti(C0.7N0.3)to that of VC is nearly 2:1 at the sintering conditions used in this study. It was found from the experiments that the system composed of the Ti(C0.7N0.3) phase exhibits a rimless structure and relatively small amount of solid solution. That is among Ti(C0.7N0.3) phase exhibits a rimless structure and relatively small amount of solid solution. This is among Ti(C1-xNx) phases the dissolution rate of Ti(C0.3N0.7) is the lowest. Also fracture toughness(KIC) of the cermet was measured by indentation method. Attentions were paid to crack propagation path to look for a dominant fracture mode and to cor-relate it with fracture toughness values. The fracture toughness was relatively high with the addition of VC content. But the addition of a large VC content reduced the overall toughness of the cermet. This result is explained with the difference in fracture mode.

• Journal of Welding and Joining
• /
• 제18권6호
• /
• pp.102-107
• /
• 2000

It was attempted to improve the wear resistance of Al alloy under the load condition by making a formation of the thick surface hardening alloy layers. The thick surface hardening alloy layers were formed on 6061 Al alloys overlayed by MIG welding process with WC-12%Co powder addition. Effects of the dispersion of WE-12%Co powders on hardness and wear characteristics of alloys were investigated. The following results were obtained. Most of WE-12%Co powders are dispersed nearly uniform as unmelted particles in the matrix alloy. A part of WC-12%Co powders are melted in the molten pool, and during solidification {TEX}$Al_{9}Co_{2}${/TEX} appeared. With increasing addition of WC-12%Co powders, the hardness and specific wear resistance of the overlay weld alloys increased and reached Hv450 at WC-12%Co powder addition rate of 54g/min. It is considered that excellent wear resistance of the overlayed alloys was due to dispersed WC-12%Co powders and increased 10 times at WC-12%Co powder addition rate of 54 g/min than that of the WC-free overlaying layers.

• 한국응용과학기술학회지
• /
• 제8권2호
• /
• pp.175-181
• /
• 1991

The kinetics of the addition of 1-benzylindole-3-(p-substituted) acetophenone derivatives was investigated by ultraviolet spectrophotometery in 30% dioxane -$H_2O\;at\;25^{\circ}C$. A rate equation which can be applied over wide pH range was obtained. The Substituent effects on 1-benzylindole-3-(p-substituted) acetophenone derivatives were studied, and addition were facilitated by electron attracting groups. On the base of the rate equation, substituent effect, and general base effect the plausible addition mechanism was proposed : Below pH 3.0, only neutral thiourea molecule was added to the carbon-carbon double bond, and in the range of pH 0.0${\sim}$14.0, netural thiourea molecule and thiourea anion competitively attacted the double bond. By contrast, above pH 10.0, the reaction was dependent upon only the addition of thiourea anion.

• 한국가금학회지
• /
• 제27권3호
• /
• pp.181-187
• /
• 2000

This work was designed to investigate the performances of broiler breeder hens upon the addition were vitamin and mineral supplements in feeds. Animals were divided into for feed groups such as control, T$_1$,T$_2$and T$_3$, and each treatment has four replications. All broiler breeder hens were housed individually, and were fed with identical iso-metaboilic energy and iso-protein, except for vitamins and minerals. Different sources and levels of vitamins and minerals were added to the basic feeds according to the treatments. At the end of the experiments, general laying rate(hen days), average egg weight, hatching egg laying rate(Hen day) every day. Hatching egg weight, sterility, embryo mortality, hatching rate and chick weight were examined. Although, early laying rate in all treatment groups were reduced during cold term management, general egg laying rate was increased only T$_3$group which was contanining vitamin C. However, similar results were obtained in the rates of general and hatching egg laying. General egg laying rate were somewhat higher of Control, T$_2$and T$_3$ groups than that of T$_1$group. In addition, the laying rates of general and hatching eggs slightly improved in the T$_3$group rather than those of Control group. Egg weight was reduced with the increasing of laying rate, showing the highest in the T$_3$group. The laying rate showed significantly lower value than those of any other groups. Egg weight was about 65g in T$_3$group. The results of hatching performance for production ability of Broiler breeder hens were fed experimental diet, although the rates of non-hatched and hatched eggs increased in order of Control, T$_1$T$_2$and T$_3$groups. However, the rate of embryo mortality was declined in order Control, T$_1$T$_2$and T$_3$groups.