• Journal of the Korea Organic Resources Recycling Association
• /
• v.2 no.1
• /
• pp.75-86
• /
• 1994

Garbage composting was studied in a controlled batch reactor with the addition of cooked rice as a biodegradable carbon source to find the effect of C/N ratio control on composting. And composting of bulking agents such as sawdust and wheat straw were tested with the addition of ammonium sulfate as a nitrogen source. As expected, biodegradation of the garbage having low C/N ratio was improved to some extent when foreign carbon was added. But bulking agents used in this study exerted slightly biodegradable carbon potential, indicating that the estimation of the dose of additional carbon considering desirable C/N ratio was not reasonable when lignocellulosic bulking material was added to garbage. It was found that the optimum moisture content increased with sawdust addition meaning the C/N ratio increment. Considering the above results, it was suggested that 78g sawdust per 100g garbage should be mixed to make C/N ratio to 25 and moisture content to 56% for effective composting of the garbage studied in this paper.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.11a
• /
• pp.289-292
• /
• 2004

This study was performed to know effective control of crack occurred by hydration heat, restraint of multiplication of hydration heat, through mechanical test, strength test and crack control test using fluosilicate salt based anti-crack agent made from by-product during phosphoric acid manufacturing process. Mix proportions for experiment were modulated at 0.495 of water to cement ratio and addition amount of fluosilicate salt based anti-crack agent to $1.0\%$. Condensation time was late and compressive strength of hardened concrete cured at several days was executed to evaluate characteristics of crack control for concrete. It is ascertained that characteristics of crack control for concrete could be improved by an adequate addition of fluosilicate salt based anti-crack agent.

• Journal of the Korean institute of surface engineering
• /
• v.43 no.2
• /
• pp.111-120
• /
• 2010

In this study, the effects of multi-complex agents addition on characteristics of electroless Ni plating solution are investigated. The species and the concentration of complexing agents are major factors to control the deposition rate, P concentration, and surface morphology of plating films. Adipic acid increases the deposition rate in regardless of single- or mutli-complex agent addition. However, lactic acid effectively increases the deposition rate in case of multi-addition as the complex agents with adipic or sodium succinate acid. In addition, sodium citric acid and malic acid show good stabilizing effects of plating solution and lowering the deposition rate, because they have high complexibility. Therefore, it is suggested that the development of Ni-P plating solution suitable for diverse usages can be carried out systematically using the database from this study.

• Journal of the Korean Applied Science and Technology
• /
• v.24 no.4
• /
• pp.416-426
• /
• 2007

Polypropylene (PP) composites with wood flour/wax/coupling agent were manufactured by melt compounding and injection molding. The influence of wood flour(WF), wax, and coupling agent on the mechanical and thermal properties of the composites was investigated. The addition of wood flour to neat PP has the higher tensile modulus and strength compared with neat PP. The presence of wax also improved the tensile modulus. At the same loading of PP and WF, the addition of coupling agent highly decreased the tensile modulus, and increased the tensile strength. From thermogravimetric analysis (TGA), the addition of wax improved the thermal stability of the composites in the later stages of degradation. The presence of MAPP and wood flour in turn decreased thermal stabilities of composites. From differential scanning calorimetry analysis (DSC), neither the loading of wax. nor the presence of MAPP has shown significant effect on the thermal transition of composites.

• Journal of Soil and Groundwater Environment
• /
• v.25 no.4
• /
• pp.7-13
• /
• 2020

In this study, a stabilization method was applied to stabilize heavy metals in soils collected from a domestic contaminated area and a Canadian mine site. The stabilizing agent used in the experiment was a solidifying agent developed by KERT Co., Ltd., Korea. The agent was applied to the samples at varying weight ratios of 0, 2, 5, 7, and 10% (w/w). and the concentrations of heavy metals in the effluent were monitored at predetemined time intervals. The results indicated that the stabilization efficiency of heavy metals (Cd, Cu, Pb) increased proportionally until the agent was increased to 5%, which showed almost no leaching of heavy metals after 28 days after agent application. Therefore, addition of 5% relative to soil mass was proposed to be the optimum dose for the stabilization agent.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2020.11a
• /
• pp.127-128
• /
• 2020

This research is part of the research for unifying the mass concrete and utilizing the rate of super retarding agent. We analyzed the performance of super retarding agent 20℃ conditions. It was found that there was no deterioration in fluidity and air quality due to the change in the super retarding agent mixing rate. It was found that when super retarding agent was mixed up to 0.5 %, it was delayed for 22.3 hours at 20℃. Therefore in order to ensure the performance required at the site, the super retarding agent mixing rate must be determined by fully considering the situation at the site. In addition it will be analyzed that super retarding agent performance analysis at high temperature will be required in subsequent studies.

• Journal of the Korean Society of Safety
• /
• v.16 no.1
• /
• pp.43-47
• /
• 2001

Effect of coupling agent on the mechanical properties of PP/GF blend was investigated. The flexural modulus, Izod impact strength, elongation at yield and tensile strength were improved with using coupling agent. Mopological studies revealed that PP and GF were incompatible and addition of coupling agent was very effective to enhance the compatibility, result in mechanical properties.

• Journal of Animal Environmental Science
• /
• v.5 no.3
• /
• pp.157-170
• /
• 1999

This study was conducted to investigate the effects of Scoria, Quartz porphyry and Oak charcoal powder feeding by 1% level of concentrate on the fattening cross bred bulls(5/8 Korean Native Cattle, 2/8 Charolais, 1/8 Brahman germ plasma) Feeding trial was conducted with 4 treatment groups which were T1(Full feeding of concentrate and roughage for 12 months), T2(T1 and Scoria addition), T3(T1 and Quartz porphyry addition) and T4(Oak charcoal addition) for 360 days, consisting of 32 heads whose initially weights were about 299.7kg. The results obtained are summarized as follows; 1. During the over-all period, average daily gains by T3, T4, T2 and T1 were 1.024, 0.987, 0.977kg and 0.964, respectively, without a significant difference by treatments. 2. Concentrate intakes per body weight and TDN intakes required per unit of kilogram gain were lower in addition agent groups than in control, and in all the treatments feed efficiency was higher at early stage for 360 fattening day than at end stage. 3. Carcass weight, dressing percent, back-fat thickness and loin eye muscle area by treatments were 330.9 to 348.4kg(average 340.3kg), 55.2~56.2(average 55.8%), 0.41~0.55(average 0.46cm)and 76.0~80.9$\textrm{cm}^2$(average 77.6$\textrm{cm}^2$), respectively, and were improved in addition agent groups than in control. 4. Meat quality grade is higher in addition agent groups than in control, and heads of 1st grade by treatments was 3, 2, 1 and none in T4, T2, T3 and T1, respectively. 5. Incidence heads of diseases by treatment were not apparently different, but diseases of digestive system was decreased in addition agent groups than in control. 6. The nitrate nitrogen content of fattening bull dung which collected in rectum were 0.082~0.089% (average 0.084%), and the content in addition agent groups was smaller than in controll. 7. Income was higher in order of T4, T3, T2, and T1 and incomes of treatment groups were grater than that of control group by 21.4 to 33.5 percent. According to the above results it may be concluded that fattening bulls may be required to feed no more than 1% of Scoria, Quartz porphyry and Oak charcoal powder based on the concentrate feeding level during the fattening period(12 to 24 month of age) to produce high quality meat and increase income.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.5
• /
• pp.356-361
• /
• 2014

The coal fly ash (CFA) may be utilized as an extender for organic waste composting at the same time fully expected to solve all industrial waste disposal and sawdust tribe. The main objective in this study was to evaluate the effect of CFA addition as a bulking agent for swine manure composting. To determine the suitable addition rate of CFA as a bulking agent, 0, 10, 20 and 30% of saw dust were mixed with 30, 20, 10 and 0% of coal fly ash, respectively. Compost quality for swine manure composting was to evaluate temperature, pH, C/N ratio, and phytotoxicity as germination index. Stability of compost increased with increasing levels of CFA as bulking agent during swine manure composting due to the high alkaline materials including CFA. C to N ratio in treatment added CFA was higher than that of the control without CFA. After finishing composting, germination index of lettuce and cabbage in swine manure compost added 10% of CFA was similar to the control, all the heavy metal contents were far below the stipulated standard for organic farming. These results indicated tahr coal fly ash as bulking agents might be alternative materials to save saw dust and apply industrial products for swine manure composting.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.38 no.1 s.113
• /
• pp.1-8
• /
• 2006

To overcome troubles in strength and process of linerboard caused by raw materials, a neutral sizing which is usual in fine paper making can be considered. A new sizing agent is necessary to show good performance in a system with high conductivity and COD. In this study, fast cure type AKD was examined as a new sizing agent and compared with conventional AKD. The effects of fixing agent addition and drying condition were also investigated. Fast cure type AKD which has a higher cationicity showed better sizing degree than conventional AKD in spite of low addition level and no curing treatment. And when fixing agent of sufficient amount was added, sizing degree was improved for both AKDs. High cationicity is a crucial factor for neutral sizing of linerboard for obtaining fast and stable sizing degree. Drying with temperature over $100^{\circ}$ was desirable for developing sizing degree.