• Journal of Electrical Engineering and Technology
• /
• v.10 no.3
• /
• pp.755-765
• /
• 2015

A thermostatically controlled load (TCL) can be one of the most appropriate resources for demand response (DR) in a smart grid environment. DR capability can be effectively implemented in a TCL with various intelligent control methods. However, because traditional on-off control is still a commonly used method in a TCL, it is useful to develop a method for adding DR capability to the TCL with an existing on-off controller. As a specific realization of supervisory control for implementing DR capability in the TCL, two methods are proposed - a method involving the changing of a set point and a method involving the paralleling of an identified system without delay. The proposed methods are analyzed through the simulations with an electric heater for different power consumption levels in the on-state. Considerable cost benefit can be achieved with the proposed methods when compared with the case without DR. In addition, the observations suggest that a medium power consumption level, instead of the maximum power, in the on-state should be used for consistently obtaining the cost benefit without severe temperature deviation from the specified temperature range for DR.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.9
• /
• pp.638-643
• /
• 2004

Middleware enables different networking devices and protocols to inter-operate in ubiquitous home network environments. The UPnP(Universal Plug and Play) middleware, which runs on a PC and is based on the IPv4 protocol, has attracted much interest in the field of home network research since it has versatility The UPnP, however, cannot be easily accessed via the public Internet since the UPnP devices that provide services and the Control Points that control the devices are configured with non-routable local private or Auto IP networks. The critical question is how to access UPnP network via the public Internet. The purpose of this paper is to deal with the non-routability problem in local private and Auto IP networks by improving the conventional Control Point used in UPnP middleware-based home networks. For this purpose, this paper proposes an improved Control Point for accessing and controlling the home network from remote sites via the public Internet, by adding a web server to the conventional Control Point. The improved Control Point is implemented in an embedded GNU/Linux system running on an ARM9 platform. Also this paper implements the security of the home network system based on the UPnP (Universal Plug and Play), adding VPN (Virtual Private Network) router that uses the IPsec to the home network system which is consisted of the ARM9 and the Embedded Linux.

• Journal of Korean Society of Water and Wastewater
• /
• v.27 no.6
• /
• pp.743-750
• /
• 2013

In this study, the carbonized aggregate of light weight and high mechanical strength using sewage sludge was evaluated with changing carbonation variables of temperature, detention time and feed condition. Porosity and mechanical strength was simultaneously increased according to increase of carbonization temperature unexpectedly. Carbonization detention time above 1 hour nearly affect on the porosity, but mainly on mechanical strength of the carbonized aggregate in case of clay addition. On $900^{\circ}C$, porosity and mechanical strength was increased rapidly, but above $1000^{\circ}C$, porosity began to decrease. Clay addition was very effective on increase of mechanical strength following much loss in porosity. The carbonized aggregate manufactured at $900^{\circ}C$ adding 30 % clay in sewage sludge was higher a little in porosity and 3 times in mechanical strength than those at $700^{\circ}C$ not adding clay. Consequently, in manufacturing the carbonized aggregate having simultaneously high porosity and mechanical strength, it is desirable to have operational condition of $900{\sim}1000^{\circ}C$ temperature and 1 hour time, and clay addition within 30 % for further higher mechanical strength.

• Journal of Technologic Dentistry
• /
• v.35 no.2
• /
• pp.97-103
• /
• 2013

Purpose: The purpose of this study was to investigate the effect of addition of fiber glass on the physical properties of silanized fiber mesh and non silanized mesh of denture base resins. Methods: The denture base resins were used in this study heat curing acrylic resins(Vertex Rs, Lucitone 199, $20{\times}80mm$) and fiber glass(SES, Green B&D co., Ltd, $20{\times}80mm$) were used as reinforcement. The specimens were stored in distilled water at $37{\pm}2^{\circ}C$ for 72 hours before test. Bending strength and tensile strength were measured by an universal testing machine(Instron 4301, Instron Corp.). Penetration distribution on fiber was observed by scanning electron microscopy(JSM 840A, Jeol Ltd). Results: The bending strength and modulus were increased by 30% after adding fiber glass on denture base resins. Tensile strength showed significant increasing by adding fiber glass on denture base resins. Conclusion: In this study, Addition of silanized fiber in denture base resins were improved physical properties. we confirmed the fiber glass possibility of the replacement about conventional materials.

• Coupled systems mechanics
• /
• v.12 no.3
• /
• pp.241-260
• /
• 2023

The objective of this study is to evaluate the effects of adding fibers to concrete and the distribution rate of the porosity on the interfacial stresses of the beams strengthened with various types of functionally graded porous (FGP) plate. Toward this goal, the beams strengthened with FGP plate were considered and subjected to uniform loading. Three types of beams are considered namely RC beam, RC beam reinforced with metal fibers (RCFM) and RC beam reinforced with Alfa fibers (RCFA). From an analytical development, shear and normal interfacial stresses along the length of the FGP plates were obtained. The accuracy and validity of the proposed theoretical formula are confirmed by the others theoretical results. The results showed clearly that adding fibers to concrete and the distribution rate of the porosity have significant influence on the interfacial stresses of the beams strengthened with FGP plates. Finally, parametric studies are carried out to demonstrate the effect of the mechanical properties and thickness variations of FGP plate, concrete and adhesive on interface debonding, we can conclude that, This research is helpful for the understanding on mechanical behavior of the interface and design of the FRP-RC hybrid structures.

• Geomechanics and Engineering
• /
• v.32 no.4
• /
• pp.445-452
• /
• 2023

Temperature is one of the important factors affecting the permeability of water in the soil. In the present study, the impact of water temperature on hydraulic conductivity (k) with and without coarse aggregations by considering six types of soils was analyzed. Moreover, the effect of sand and gravel presence in the soil was investigated through the infiltration based on constant and inconstant water head experiments. Results indicated that by increasing the water temperature, adding gravel to sandy soil caused the hydraulic conductivity to raise. It is supposed that the gravel decreased the contact surface between the water and the soil aggregates. It is deduced that due to decreasing kinetic energy, k tends to have lower values. Furthermore, adding the sand to sandy silt-clay soil showed that the sand did not have a marginal effect on the variation of k since the added sand cannot increase the contact surface like gravel. Finally, increasing the main diameter of the soil will increase the effect of the water temperature on hydraulic conductivity.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.4
• /
• pp.239-250
• /
• 2020

In this study, effects of five raw water quality parameters (turbidity, odor compounds caused by algae, filter clogging caused by algae, pH increase caused by algae, and organic matter) on improvements and operations costs of typical water treatment plant (WTP) were estimated. The raw water quality parameters were assumed the worst possible conditions based on the past data and costs were subsequently estimated. Results showed that new water treatment facilities were needed, such as a selective intake system, an advanced water treatment processes, a dual media filter, a carbonation facility, and a re-chlorination facility depending on water quality. Furthermore, changes needed to be made in WTP operations, such as adding powered activated carbon, increasing the injection of chlorine, adding coagulation aid, increasing the discharge of backwashed water, and increasing the operation time of dewatering facilities. Such findings showed that to reliably produce high-quality tap water and reduce water treatment costs, continuous improvements to the quality of water sources are needed.

• The Korean Journal of Community Living Science
• /
• v.23 no.1
• /
• pp.51-59
• /
• 2012

This study was conducted to investigate the rheological properties of mulberry powder on the weak flour using color, Rapid Visco Amalyzer(RVA), farinogram, alveogram. The lightness(L value) and yellowness(b value) decreased and the redness(a value) increased with increment of mulberry powder content. On the RVA data, the weak flour with 1% of mulberry powder showed the highest initial pasting temperature and peak viscosity, while the addition of mulberry powder reduced final viscosity. On the farinogram data, the consistency of the flour containing mulberry powder was decreased with increments of mulberry powder. This meant that mulberry powder could weaken the batter. Water absorption of the samples with mulberry powder was decreased more than the control. The development time of flour with mulberry powder was also decreased more than control, but the differences were not significant. The stability of the flour with adding mulberry powder was decreased. The Pmax value of the flour was decreased significantly by adding mulberry powder. Extensibility and swelling index were both increased, but there were no significant differences.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.12
• /
• pp.1088-1095
• /
• 2008

5-axis NC machining has a good advantage of the accessibility of tool motion by adding two rotary axes. It offers numerous advantages such as expanding machining fields in parts of turbo machineries like impeller, propeller, turbine blade and rotor, reasonable tool employment and great reduction of the set-up process. However, as adding two rotary axes, it is difficult to choose suitable machining conditions in terms of tool path, tool posture, feedrate control at a tool tip and post-processing. Therefore in this paper, it is proposed to decide suitable machining condition through an experimental method such as adopting various tool paths, tool postures, and feedrate types. Machining experiment on AL7075 for impeller is performed to define suitable machining condition, and measurement of surface roughness on machined surfaces depended on each machining condition is performed. By defining suitable machining condition, we should have conclusion as improving the surface quality in the aspect of surface roughness and machined shape of surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.421.1-421.1
• /
• 2014

Top-down processes based on photolithography technology have been developed by using light sources with short wavelength, however, the processes are expected to meet their limits in higher integration of semiconductor integrated circuits. To overcome the limits, researches on bottom-up processes have been proceeded. One of those, fabrication of nanodevices by using nanoparticles has been on research. But it is difficult to align nanoparticles at appropriate positions. To resolve this, studies has been proceeded to form nanowires by bonding DNA molecules which have self-assembly property and positive-charged functionalized gold nanoparticles. There are negative-charged phosphates in backbones of DNA molecules. By using the attractive force between the negative charge of the phosphates and the positive charge of gold nanoparticles, the Au-DNA nanowires are made. However, bonding Au nanoparticles only on DNA molecules, not other nanoparticles, is to be solved. So we studied to resolve this problem. In the formation of Au nanoparticles, we changed the charge of Au nanoparticles by adding HCl to control pH of the functionalized nanoparticles, measured zeta potential. Then we bonded the nanoparticles and DNA molecules and made observation by using FE-SEM and AFM.