• Journal of the Korean Society of Food Culture
• /
• v.16 no.2
• /
• pp.170-179
• /
• 2001

Green Tea consists of 15-30% catechins (a type of polyphenol), which act as super antioxidants, inhibitory action against aging process. Antioxidants fight radical-free oxygen, an agent which can begin the process of cancer by damaging essential body chemicals and harming DNA. This study was peformed to develop the elderly diet using Green Tea as an inhibitory action against aging process. Nokchaborijook (Baley gruel added rice powder and Green Tea) was manufactured by various levels of Green Tea(1, 4, 7%) and the grinding period(15, 30, 45 sec). The optimum levels of added Green Tea and grinding periods on Nokchaborijook were determined with the results of sensory evaluation by response surface methodology and analysis of composition. The Anti-oxidant Vitamin A, C, E and Flavonoid were increased with increased levels of Green Tea and grinding periods be decreased. As the levels of Green Tea and grinding periods were increased, the green color and penetrated force became stronger. Among the sensory attributes, Bitterness, Green Tea Flavor and Hashness were greater depending on increasing Green Tea. Jujube flavor was greater relying on decreasing Green Tea. Greenness and spreadability of particles were increased as both the amounts of Green Tea and the grinding period were increased. This result was used to determine the optimum conditions of adding levels of Green Tea and grinding periods. The optimum conditions of Nokchaborijook was established as adding of 5.8% Green Tea grinded for 15 seconds.

• Journal of the Korean Ceramic Society
• /
• v.56 no.4
• /
• pp.365-373
• /
• 2019

Pond ash is a mixture of mostly coarser fly ash and bottom ash. The recycling rate of pond ash is low because pond ash is mixed with seawater and deposited in ponds. The pond ash is also subjected to natural weathering over a period of time. In this study, we investigated whether pond ash can be used as a raw material of geopolymers, without any purification process or through a minimal purification process. In addition, we investigated whether synthetic basalt made by adding foaming agent to geopolymer or casting it into a mold can show the surface of the natural basalt as it is. The highest 7-day compressive strength in geopolymers from pond ash without purification process was 26 MPa. The highest 7-day compressive strength in geopolymers from pond ash with impurities removed through dry sieve analysis was found to improve to 80 MPa. On the other hand, synthetic basalt made with geopolymer was shown to be more advantageous aesthetically when produced by casting it in a silicone mold rather than by adding a foaming agent. Non-purified pond ash can be made into geopolymers having low strength. Pond ash purified by sieving can, without use of an aggregate, be made into geopolymer having high-strength. Also, it is possible to produce synthetic basalt with the same appearance as natural basalt and sufficient strength for commercialization. This process will contribute to the mass consumption and recycling of pond ash.

• Korean Journal of Medicinal Crop Science
• /
• v.18 no.2
• /
• pp.79-85
• /
• 2010

Enhancement effect of ultrasonification process on UV-protection and skin-whitening activities using Centella asiatica L. Urban extract was investigated. Cytotoxicity of the extracts measured on human skin fibroblast cells, CCD-986sk, and then, ultrasonification associated extracts showed 5~9% lower cytotoxicity then normal crude extracts on 1.0 mg/$m{\ell}$ of highest sample concentration. The associated extrats showed highest inhibition activity of hyaluronidase on 1.0 mg/$m{\ell}$ of concentration as 54.2%. Also, the associated extract reduced expression of MMP-1 on UV-irradiated CCD-986sk cells down to 100.2% from 136.1%, and revealed high inhibitory potency on tyrosinase as 74.6% by adding 1.0 mg/$m{\ell}$ of concentration. Ultrasonification associated extract showed strong inhibition effect of melanin production on Clone M-3 cells as 84.2% by adding 1.0 mg/$m{\ell}$ of concentration. From the preliminary observations, we considered that the extracts from C. asiatica could be potent natural materials for skin-whitening and anti-aging agent, and could enhance the activities by ultrasonification process.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.681-689
• /
• 2009

Disk grinding was often applied to deburring process in order to enhance the final product quality. Inherent chamfering capability of the flexible disk grinding process in the early stage was analyzed with respect to various process parameters including workpiece length, wheel speed, depth of cut and feed. Initial chamfered edge defined as arc zone was characterized with local radius of curvature. Averaged radius and arc zone ratio was well evaluated using neural network system. Additional neural network analysis adding workpiece length showed enhance performance in predicting arc zone ratio and curvature radius with reduced error rate. A process condition design parameter was estimated using remaining input and output parameters with the prediction error rate lower than 2.0% depending on the relevant input parameter combination and neural network structure composition.

• Journal of the Korean Ceramic Society
• /
• v.52 no.5
• /
• pp.315-319
• /
• 2015

Yttria-stabilized zirconia (YSZ)-based micro tubular SOFC single cells were fabricated by electrophoretic deposition (EPD) process. Stable slurries for the EPD process were prepared by adding phosphate ester (PE) as a dispersant in order to control the pH, conductivity, and zeta-potential. NiO-YSZ anode support, NiO-YSZ anode functional layer (AFL), and YSZ electrolyte were consecutively deposited on a graphite rod using the EPD process; materials were then co-sintered at $1400^{\circ}C$ for 4 h. The thickness of the deposited layer increased with increasing of the applied voltage and the deposition time. A YSZ-based micro tubular single cell fabricated by the EPD process exhibited a maximum power density of $0.3W/cm^2$ at $750^{\circ}C$.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.4
• /
• pp.19-21
• /
• 2006

Biaxially textured Ni was fabricated by electrodeposition process and delaminated from the biaxially textured cathode surface for further buffer layer deposition process. Those electrode posited Ni substrates showed well-developed biaxial texture and smooth surface. In order to improve the thermal stability of Ni substrates, Mn was alloyed by adding Mn precursor into the electrodeposition bath. Subsequently, $CeO_2$ buffer layers are deposited by MOD process to prevent interfacial reaction between superconductor and substrates. In particular, Bismuth oxide was added to $CeO_2$ to realize lower temperature processing of buffer layers. The microstructure and texture development of each layers have been investigated. Preliminary results shows that all electro/chemical process can be a candidate for cost effective route to YBCO coated conductor.

• YAKHAK HOEJI
• /
• v.7 no.2_3
• /
• pp.67-71
• /
• 1963

Studies the reaction mechanism and optimal reaction condition of the process of preparing sodium isocyanate, by means of heating of sodium carbonate and urea. Proposing, at the sametime, the quantitative analyzing method of sodium isocyanate in the presence of impurities of $Na_{2}CO_{3}$, urea and biuret. 1. Sodium isocyanate could be prepared by means of heating reaction of sodium carbonate and urea. 2. Adding urea into the heated sodium carbonate is reasonable. 3. Quantitative analysis of sodium isocyanate in the presence of impurities, $Na_{2}CO_{3}$, urea and biuret could be done by the following method:-adding nitrobarite solution into sample solution in order to remove $CO_{3}"$ and neutralize the solution, filtering off $BaCO_{3}$, and then precipitating isocyanate as a silver salt, filtering off AgNCO, and then, titrating remaining $AgNO_{3}$ with $NH_{4}SCN$, (indicator $FeNH_{4}(SO_{4})_{2})$/TEX>

• Proceedings of the Korea Concrete Institute Conference
• /
• 1999.10a
• /
• pp.85-88
• /
• 1999

We tested the limestone powder as a filler powder for the effective use of slag cement. Hydration process were investigated by measuring the thermal differential analysis(DTA), compressive strength, XRD patterns, calorimeter of slag cement-limestone powder paste prepared by mixing limestone powder-slag cement. The results obtained in this study, there were no significant difference between the cases of adding up to 5% limestone powder, but the reaction time was accelerated. Also the compressive strength was increased for adding up to 5% limestone powder. The min hydrated paste products were Ca(OH)2 and calcium silicate hydrates. In the case of mixed limestone powder peak appear tricalcium carboaluminate hydrate in the sample of 7 days hydration.

• Journal of the Korea Furniture Society
• /
• v.19 no.6
• /
• pp.452-459
• /
• 2008

The compressed injection yellow ocher soil is the process-technology by drying the product through sunshine, not by firing like pottery and ceramic ware. It is the technology of development being able to achieve the far infrared ray and humidity adjustment by adding recycling paper, Korean paper and bamboo salt, and it corresponds with the construction enforcement ordinance 2007 as an interior-finishing product which is fire-resistant. In case that the yellow ocher soil would be used as lighting device and interior-finishing material and decoration, it could contribute to an improvement of National Health by avoiding the sick house syndrome and adding humidity adjustment, and it has more efficient economic effect due to using recycle-available additives. Through such developments of the yellow ocher soil products the domestic market of lighting device and construction material can be advanced and the replacement effect of imported goods & also export effect can be expected accordingly.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.05a
• /
• pp.80-81
• /
• 2017

The study conducted a thermal conductivity test of magnesium oxide to manufacture boards using absorbent to produce board of radon gas molecules that are absorbed into the indoor air pollutants, which are currently in question, among other indoor air pollutants. Using material are the vermiculite and anthracite, in case of the vermiculite, which results in large porosity due to the expansion, in case of the anthracite, which characteristic generates pore on the matrix. As a result of the experiment, the lowest value was given to 0.6161 kcal/mh℃ which adding vermiculite 10% and anthracite 40%. However, adding vermiculite 40% and anthracite 10%, slightly higher 0.7229 kcal/mh℃, it is deemed the anthracite has more porosity than the vermiculite and, it judged that pore occurrence during the mixing process, appeared that the heat conductivity go down.