• 전자공학회논문지A
• /
• 제30A권7호
• /
• pp.60-74
• /
• 1993

Experiments of RIE of tungsten films using SF$_{6}$ plasma were conducted to investigate the effect of process parameters on etch rate, uniformity, anisotropy, and selectivity. As power increased, the etch rate increased. Maximum etch rate was obtained at 200mtorr As interelectrode spacing increased the etch rate increased for P < 200mtorr while it decreased for P> 200mtorr. Etch rate was maximum at 20 sccm gas flow rate. As substrate temperature increased, the etch rate increased and activation energy was 0.046 eV. In addition, maximum etch rate was acquired at 20% $O_{2}$ addition. The etch rate slightly increased when Ar was added up to 20% while it continuously decreased when N$_{2}$ was added. Uniformity got improved as pressure decreased and was less than 4% for P <100mtorr. Mass spectrometer was utilized to analyze gas composition and S and F peaks were observed from XPS analysis with increasing power. The anisotropy was better for smaller power and spacing, and lower pressure and temperature. It improved when CH$_{4}$ was added and anisotropic etch profile was obtained when about 10% $O_{2}$ was added. The selectjvity was better for smaller power larger pressure and spacing, and lower temperature. Especially. low temperature processing was proposed as a novel method to improve the anisotropy and selectivity.

• 펄프종이기술
• /
• 제40권3호
• /
• pp.36-41
• /
• 2008

It is known that ethanolamines play a critical role for deacidification of paper sized by alum-rosin. However, amines also are effective as a chelating agent of metal. The present work was focused on whether amines could scavenge metals and prevent from the aging of paper. Metals such as alum, copper(II) and iron(III) was added to paper, and the paper treated with amines was aged in a thermo-hygrostat for 3-6 days. In the case of paper added to alum, the amines efficiency against paper aging was good in the oder of triethanolamine, diethanolamine and monoethanolamine attributable to the intensity of basicity and steric effect. Even in the case of paper treated with copper(II) chloride, iron(III) chloride, and copper(II) chloride, the significant preservation efficiency was shown by ethanolamine during accelerated aging. This outcome pinpoints the fact that ethanolamine can prevent paper aging not only from acid by neutralizing acid contained in paper but also from metals by producing of complexes with metals. These consequences above convince that ethanolamine makes it possible for mass deacidification for paper which contains acid and metals. Future studies should be conducted concerning whether, in reality, the treatment of its gas mode, in a single or multiple applications, has significant effect on lessening paper aging.

• 대한기계학회논문집B
• /
• 제20권2호
• /
• pp.720-729
• /
• 1996

An analysis of convective boiling heat transfer for refrigerant mixtures is performed for an annular flow to investigate the degradation of the heat transfer rate. Annular flow is selected in this study because a great portion of the evaporator in the refrigeration and air conditioning system is known to be in the annular flow regime. Mass transfer effect due to composition difference between liquid and vapor is included in this analysis, which is considered to be one of driving forces for the mass transfer at the interface. Due to the concentration gradient at the interface the mass transfer is interfered, so is the evaporative heat transfer at the interface. The mass transfer resistance makes the interface temperature slightly higher and, as a result, the heat transfer coefficients decrease compared with those without mass transfer effects. The degradatioin of the heat transfer rate reaches its maximum at a certain composition. The composition difference between vapor core and vapor at the interface has a direct effect on the temperature difference between the vapor core and the interface and the degradation of the heat transfer rate. Correction factor $C_{F}$ for the mixture effects is added to the correlation for pure substances and the flow boiling heat transfer coefficients can be calculated using the modified equation.n.

• 산업경영시스템학회지
• /
• 제38권4호
• /
• pp.39-44
• /
• 2015

The VHTR (Very High Temperature gas-cooled nuclear Reactor) has been considered as a major heat source and the most safe generation IV type reactor for mass hydrogen production to prepare for the hydrogen economy era. The VHTR satisfies goals for the GIF (Generation IV International Forum) policy such as sustainablility, economics, reliability and proliferation resistance and physical protection, and safety. As a part of a VHTR economic analysis, we have studied the VHTR construction cost and operation and maintenance cost. However, it is somewhat difficult to expect the ripple effect on the whole industry due to the lack of information about Inter-industries relationship. In many case, the ripple effect are based on experts' knowledge or uncertain qualitative assumptions. As a result, we propose quantitative analysis techniques for ripple effects such as the production inducement effect, added value inducement effect, and employment inducement effect for VHTR 600MWt${\times}$4 modules construction and operation ripple effect based on NOAK (Nth Of A Kind). Because inducement effect values have been published annually, we predict inducement effect's relation function and estimated values including production inducement effect value, added value inducement effect value, and employment inducement effect value using time series and estimated values are verified with published inducement effects' value. This paper presents a new method for the ripple effect and preliminary ripple effect consequence using a time series analysis and inter-industry table. This ripple effect analysis techniques can be applied to effect expectation analysis as well as other type reactor's ripple effect analysis including VHTR for process heat.

• 한국세라믹학회지
• /
• 제26권6호
• /
• pp.783-788
• /
• 1989

The reason of abnormal expansion in BaTiO3 synthesized in the equimolecular mixture and synthesized in Ba-rich region were investigated at the point of crystal and microstructure. The shrinkage and the expansion of the mixtures in BaCO3-TiO2 system were determined by the mass of BaCO3 added to the equimolecular BaCO3 and TiO2, Ba2TiO4 which was much formed and BaTi2O3 were important crystal in the reaction of Ba-rich region. Sintering phenomena of unreacted BaCO3 activity and the secondary phase caused to generate microcracks in the specimens.

• Journal of Radiation Protection and Research
• /
• 제41권4호
• /
• pp.378-383
• /
• 2016

Background: Radiation dose rates in PRIDE facility is evaluated quantitatively for assessing radiation safety of workers because of large amounts of depleted uranium being handled in PRIDE facility. Even if direct radiation from depleted uranium is very low and will not expose a worker to significant amounts of external radiation. Materials and Methods: ORIGEN-ARP code was used for calculating the neutron and gamma source term being generated from depleted uranium (DU), and the MCNP5 code was used for calculating the neutron and gamma fluxes and dose rates. Results and Discussion: The neutron and gamma fluxes and dose rates due to DU on spherical surface of 30 cm radius were calculated with the variation of DU mass and density. In this calculation, an imaginary case in which DU density is zero was added to check the self-shielding effect of DU. In this case, the DU sphere was modeled as a point. In case of DU mixed with molten salt of 50-250 g, the neutron and gamma fluxes were calculated respectively. It was found that the molten salt contents in DU had little effect on the neutron and the gamma fluxes. The neutron and the gamma fluxes, under the respective conditions of 1 and 5 kg mass of DU, and 5 and $19.1g{\cdot}cm^{-3}$ density of DU, were calculated with the molten salt (LiCl+KCl) of 50 g fixed, and compared with the source term. As the results, similar tendency was found in neutron and gamma fluxes with the variation of DU mass and density when compared with source spectra, except their magnitudes. Conclusion: In the case of the DU mass over 5 kg, the dose rate was shown to be higher than the environmental dose rate. From these results, it is concluded that if a worker would do an experiment with DU having over 5 kg of mass, the worker should be careful in order not to be exposed to the radiation.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2013년도 특별논문집
• /
• pp.85-89
• /
• 2013

In the engine room and the aft body, there are so many fluid tanks such as fresh water tank and oil tank. The vibration analysis for the fluid tank structures has to consider the added mass effect due to the fluid. However, it is known that the result of the fluid tank has the difference according to the boundary condition of the fluid field such as infinite fluid and finite fluid. In this paper, a numerical case study is carried out for the research about the vibration characteristics of the fluid tank with various fluid field. In addition, an experimental study is carried out to verify the validity of the vibration analysis for the fluid tank structure.

• 한국자동차공학회논문집
• /
• 제11권4호
• /
• pp.29-36
• /
• 2003

A cylindrical constant volume combustion chamber was used to investigate the flow characteristics at spark plug and the combustion characteristics of inhomogeneous charge methane-air mixture under several parameters. The flow characteristics such as mean velocity and turbulence intensity was analyzed by hot wire anemometer. Combustion pressure development measured by piezoelectric pressure transducer was used to investigate the effect of initial charge pressure, excess air ratio and ignition times on combustion pressure and combustion duration. Mean velocity and turbulence intensity had the maximum value at 200 or 300ms and then decreased to beneath 0.05m/s gradually at 3 seconds. Second mixture is accompanied by an increase in the combustion rate, and that the higher the mass which is added in the second stage injection, the faster the burn rate.

• 한국항해항만학회지
• /
• 제29권8호
• /
• pp.673-678
• /
• 2005

선박의 대형화 추세에 따른 항만 운영의 효율성 및 대형 선박의 접안 안전성을 향상시키기 위해서는 먼저 선체에 작용하는 접안에너지를 합리적으로 산출하여야 한다. 선박의 접안에너지는 방충재와 같은 항만시설물의 설계에 대한 허용 기준을 결정하는 변수임과 동시에 도선사 및 선박의 조선자에게는 예인선의 필요 마력이나 접안속도 등을 결정하는데 있어 중요한 판판 요소로 활용된다. 본 연구에서는 현재 사용되고 있는 운동역학적인 방법을 토대로 한 접안에너지 산출 방법에 대해 유체역학적인 측면에서 문제를 제기하고, 부두 전면의 수심과 선박의 형상에 따라 변화하는 천수역 선체부가질량을 고려한 접안에너지의 산출 방법을 제안한다. 또한 천수역에서 선체에 작용하는 부가질량을 고려한 접안에너지 산출 방법을 사용하여 1600TEU급에서 12000TEU급까지의 컨테이너 선박을 대상으로 계통적으로 각각의 접안에너지를 계산하고, 현행의 접안에너지 산출방법과 비교 검토를 실시한다.

• 한국미생물·생명공학회지
• /
• 제25권2호
• /
• pp.197-202
• /
• 1997

Effect of arabinose on xylitol production from xylose by Candida parapsilosis KFCC 10875 was investigated at the different concentrations of arabinose. When the arabinose was added in xylose medium, the cell growth increased and the final cell concentration was maximum at 10 g/l arabinose. The consumption rate of arabinose was greatly lower than those of xylose and arabinose. Above 10 g/l arabinose, it was not completely consumed and then remained in the medium during xylitol fermentation. Estimated cell mass obtained from arabinose increased with increasing consumed arabinose. As arabinose concentration was increased, xylitol production decreased but ethanol production increased. The inhibitory effect of ethanol, a major by-product, on xylitol production was also studied. As the ethanol concentration added increased, xylitol production decreased. When cells were inoculated in a xylose medium after removing ethanol, xylitol production was not inhibited. This results suggested that the inhibition of xylitol production resulted from ethanol which was formed by adding arabinose. It was also interesting that total products(xylitol and ethanol) yield was constant regardless of the arabinose concentration. This result suggested that the total amount of products such as xylitol and ethanol from xylose was constant regardless of the arabinose concentration and arabinose shifted the carbon flow from xylitol to ethanol.