• Title/Summary/Keyword: Add/Drop

검색결과 125건 처리시간 0.019초

링크식 격발기구 설계에 관한 연구 (A Study on Designing Link Type Percussion Lock)

  • 이준호;여운주;최의중
    • 한국군사과학기술학회지
    • /
    • 제12권3호
    • /
    • pp.259-265
    • /
    • 2009
  • In the traditional percussion locks of small arms, a firing pin is struck by a hammer rotating on a single center of rotation, which makes the percussion mechanism simple and reliable. In order to strike the firing pin by the hammer, however, the firing pin should be located within the radius of rotation of the hammer. As the distance between the striking point of the firing pin and the center of rotation of the hammer becomes longer, the radius of rotation of the hammer should also be increased, which results in the increase of the volume and weight of the small arms because the hammer needs the more space for its operation inside of the small arms. In this paper, a link type percussion lock was newly proposed in order to overcome the limitation of designing small arms when using traditional percussion locks, as mentioned above. The link type percussion lock was modeled by using multi-body dynamics software and designed to satisfy the requirements such as striking force level of the hammer exerting on the firing pin enough to detonate the percussion cap of ammunitions and the safety on the accidental drop. It was applied to the newly developed dual-barrel weapon system, in which the weight and overall length are important design factors, and verified by durability test and drop test on the ground.

멀티미디어 통신망 설계에서 게이트웨이 위치와 광경로 결정문제를 해결하는 휴리스틱 접근방법 (Effective Heuristic Procedures for Solving a Gateway Location and fiber Routing Problem in Designing Multimedia Telecommunication Networks)

  • 이영호;남기효;김성인
    • 한국통신학회논문지
    • /
    • 제24권7B호
    • /
    • pp.1220-1228
    • /
    • 1999
  • 이 연구는 멀티미디어 서비스를 제공하는 중요한 망 설계 문제를 다룬다. 이 연구에서 다루는 문제는 게이트웨이 위치와 광케이블 경로를 정하는 문제로서 가능한 한 총비용을 최소화하는 소넷링을 설계한다. 고려하는 비용은 게이트웨이와 전화국에 설치되는 가감 다중화기(Add-Drop Multiplexer)의 설치비용과 광케이블의 선로 비용이다. 이를 해결하기 위하여 먼저 최적화모형을 제시하고, 효율적인 해법으로서 몇 가지 휴리스틱 방법을 개발한다. 몇 가지 예제를 수행한 결과는 두 해법의 총비용 절감 효과를 보여준다.

  • PDF

Design and Simulation of Two-Dimensional OCDMA En/Decoder Composed of Double Ring Add/Drop Filters and Delay Waveguides

  • Chung, Youngchul
    • Journal of the Optical Society of Korea
    • /
    • 제20권2호
    • /
    • pp.257-262
    • /
    • 2016
  • A two-dimensional optical code division multiple access (OCDMA) en/decoder composed of four double-ring resonator add/drop filters and three delay waveguides is designed, and a transfer matrix method combined with fast Fourier transform is implemented to provide numerical simulations for the en/decoder. The auto-correlation peak level over the maximum cross-correlation level is larger than 3 at the center of the correctly decoded pulse for most of wavelength hopping and spectral phase code combinations, which assures the BER lower than 10-3 which corresponds to the forward error correction limit.

단말의 프로필을 이용한 새로운 CDMA 소프트 핸드오프 알고리즘의 성능 분석 (Performance Analysis of a Novel CDMA Soft Handoff Algorithm Using Mobile Terminal Profiles)

  • 정다위
    • 한국시뮬레이션학회논문지
    • /
    • 제7권2호
    • /
    • pp.153-165
    • /
    • 1998
  • In the Is-95 soft handoff scheme of CDMA, there occurs a tradeoff between improving quality due to the space diversity and additional resource management like updates of the active set during soft handoffs. In addition, if a mobile terminal is alternating two adjacent cells, a well-known phenomenon called ping-ping causes the resource management to be seriously degraded. By noting that in general the probability that a user initiates additional handoffs is exponentially decreased as the user has already handed over one or more times, we present a soft handoff algorithm making use of handoff profiles of mobile terminals to improve resource utilization. In the proposed algorithm the number of handoffs made so far during the call is recorded in the mobile profile and the profile data is used for adjusting handoff parameters such as the value of add or drop threshold (T_ADD or T_DROP). Through simulations, the result of the proposed algorithm is shown to improve the handoff performance by lowering the number of handoffs while simultaneously reducing resource waste.

  • PDF

Ti:LiNbO3 2×2 Optical Add/Drop Multiplexers Utilizing Acousto-Optic Effect

  • Jung, Hong-Sik;Jung, Gi-Jo;Kim, Jung-Hee
    • Journal of the Optical Society of Korea
    • /
    • 제6권2호
    • /
    • pp.27-32
    • /
    • 2002
  • An integrated optical 2$\times$2 add/drop multiplexer in X-cut, Y-propagating LiNbO$_3$ has been demonstrated. The device consists of passive polarization splitters and acousto-optical mode converters with weighted coupling utilizing tapered acoustical directional couplers; their specific design and properties are discussed. The insertion loss has been measured to be about -8.16 ㏈ and -8.6 ㏈ for TE and TM polarizations, respectively. The device shows a 3 ㏈ bandwidth of 2.3 nm, a tuning rate 8.34 nm/MHz around λ = 1554 nm, and a sidelobe suppression of about 14.5 ㏈. Optimum operation is achieved with a RF drive power of about 43 ㎽. Multi-wavelength operation has been demonstrated.

Channel-selectable multichannel optical add/drop multiplexer based on a sampled fiber grating

  • Lee, Kyung-Shik;Lee, Jong-Hun;Cho, Joon-Yong;Yoon, Hyung-Do
    • Journal of the Optical Society of Korea
    • /
    • 제6권2호
    • /
    • pp.44-47
    • /
    • 2002
  • In this paper, we propose and demonstrate a novel channel-selectable multichannel optical add/drop multiplexer consisting of a sampled fiber grating and tunable fiber Bra99 gratings. The device adds and drops not only single channel, but also any predetermined multiple channels simultaneously with low interchannel crosstalk by wavelength tuning as small as 0.5 nm or less. The interchannel crosstalk better than 27㏈ has been shown experimentally.

압전 소자형 광섬유 격자 소자를 이용한 파장 분할 다중화 시스템용 파장 가변형 광 분기/결합 장치 (Optical tunable wavelength add/drop multiplexer employing piezoactuated fiber Bragg gratings for WDM system)

  • 김세윤;이상배;최상삼;정준;정지채
    • 한국광학회지
    • /
    • 제8권4호
    • /
    • pp.340-344
    • /
    • 1997
  • 기존의 광섬유 격자 소자를 이용한 광 분기/결합 장치들이 광섬유 격자 소자의 브래그 파장에 해당하는 신호만을 선택할 수 있었던 단점을 극복하기 위해 압전 소자에 광섬유 격자 소자를 부착한 압전 소자형 광섬유 격자 소자를 제작하고, 이러한 압전소자형 광섬유 격자 소자와 편광 선속분할기를 이용하여 파장 분할 다중화 시스템용 파장 가변형 광 분기/결합 장치를 제안하고 실험하였다. 본 장치는 두 빛의 편광 상태를 이용하여 광섬유 격자 소자에 해당하는 파장의 신호를 분기/결합하는 장치로서 외부의 온도 변화에 크게 영향을 받지 않는 안정적인 특성을 보였다. 압전 소자에 전압을 인가함으로써 광섬유 격자 소자의 브래그 파장에 해당되는 신호(1549.3 nm)뿐만 아니라 가변된 파장(1550.1 nm)의 신호도 분기/결합할 수 있었다. 파장을 가변하지 않을 경우와 파장을 가변했을 경우 모두 광섬유 격자 소자에 의해 분기된 신호와 인접 채널 신호간의 차이 -26 dB 이하였으며 분기된 신호 중 광섬유 격자 소자를 통해 나오는 누설 신호는 -34 dB였다.

  • PDF

능동형 광 링 네트워크의 특징 및 요구 대역폭에 따른 성능 분석 (Characteristics of active optical ring network and performance evaluation in Bandwidth on Demand)

  • 이상화;송해상
    • 한국컴퓨터정보학회논문지
    • /
    • 제10권6호
    • /
    • pp.209-218
    • /
    • 2005
  • 링형 광 액세스망에서 능동형 광네트워크(AON: Active Optical Network)는 DWDM(Dense Wavelength Division Multiplexing)을 이용하여 요구대역폭(BoD: Bandwidth on Demand)에 따라서 가입자에게 원활한 서비스를 제공할 수 있다. 이를 위하여 기존의 광 기가비트 이더넷 스위치에서 다수개의 파장 및 서브캐리어(Sub-Carrier) 접속을 지원하며, 특정 파장을 분기하는 WADM (Wavelength Add Drop Multiplexer)과 링의 형태로 연결된다. WADM에서 분기된 특정 파장은 가입자단에 이르러 서브캐리어별로 역다중화 되어 가입자에게 분배되므로 가입자망의 분배가 시작되는 광 기가비트 이더넷 스위치와 가입자 단말 접속 장치간의 능동적인 연결이 가능한 구조를 가진다 본 논문에서는 이러한 AON 구조에서 BoD에 따라서 달라지는 버퍼의 크기를 비교 분석하고 또한 비트의 지체시간을 서버의 처리율과 비교 분석한다. 이러한 실험을 통하여 소요 시간의 한계를 결정함으로써 가입자에게 요구 대역폭에 따른 원활한 서비스를 제공할 수 있는 네트워크의 동적 운용 프로토콜 및 효율적인 알고리즘 구현을 위한 기준을 제시한다.

  • PDF

채널 가감 파장분할다중(WDM)망에서 EDFA 이득의 빠른 과도 응답 제어 (A fast transient control of EDPA gain on channel add/drop WDM networks)

  • 박정문;이상헌;신서용;송성호
    • 한국통신학회논문지
    • /
    • 제30권4A호
    • /
    • pp.233-240
    • /
    • 2005
  • 본 논문에서는 파장분할다중(WDM)망에 적용된 어븀첨가 광섬유증폭기(EBFA)의 이득이 채널의 가감(add/drop)게 따라 변화하는 것을 EDFA의 3-레벨 모델을 기반으로 하는 비례-적분-미분 제어기(PID controller)가 적용된 새로운 외란관측기법을 통해 제어함으로써 이득회복시간을 $3\mu$sec 이하까지 단축시킬 수 있음을 보였다. $3\mu$sec이하의 이득회복 및 안정화 시간은 지금까지 발표된 것들 가운데 가장 빠른 것으로 종전에 2-레벨 EDFA 모델을 기반으로 하는 PI 제어기가 사용된 외란관측기법을 통해 얻었던 $250\mu$sec의 약 $1\%$, 그리고 현재 상용화되어 있는 WDM 망용 EDFA의 가장 빠른 이득회복시간인 $200\mu$sec의 $2\%$도 채 안되는 시간이다. 이러한 결과는 외란관측기의 파라미터와 PI 제어기의 제어 파라미터의 변화에 따른 시스템의 특성 변화를 분석하여 제어기를 최적함으로써 얻어 낼 수 있었으며, 이를 상용화에 적용할 경우, 향후 유동적(dynamic) WDM 망에서 매우 중요한 역할을 할 것으로 전망된다.

스트레인광학효과를 이용한 2×2Ti:LiNbO3 삽입/분기 집적광학 멀티플렉서 (2×2Ti:LiNbO3 Integrated Optical Add/Drop Multiplexers utilizing Strain-Optic Effect)

  • 정홍식;최용욱
    • 한국광학회지
    • /
    • 제17권5호
    • /
    • pp.430-436
    • /
    • 2006
  • 1550nm 파장대역에서 편광에 관계없이 동작하는 $Ti:LiNbO_3\;2{\times}2$ 삽입/분기 광 멀티플렉서를 구현하였다. 소자는 두 개의 입 출력 광도파로, 두 개의 편광모드분리기, 두 개의 편광모드 변환기 그리고 전기광학효과로 파장을 가변시킬 수 있는 전극으로 구성되었다. TE, TM 편광에 대해서 단일모드 특성을 갖는 채널 광도파로는 x-cut $LiNbO_3$에 Ti 확산 방법으로 제작하였으며, 채널 광도파로 위에 배열된 $SiO_2$ 패드의 전단 스트레인을 이용하여 위상정합 편광모드변환기를 구현하였다. 한편 전기광학효과를 이용하여 파장을 가변시키기 위해서 전압을 인가하여 광도파로의 복 굴절률을 변화시켰다. 0.094nm/V 파장가변률과 최대 17nm 파장을 가변시켰으며, 8.2dB 부 모드레벨과 3.72nm FWHM을 측정하였다.