• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1248-1250
• /
• 2004

This paper is proposed adaptive fuzzy-neural network controller(NFC) for speed control of surface permanent magnet synchronous motor(SPMSM) drive. The design of this algorithm based on NFC that is implemented using fuzzy control and neural network. This controller uses fuzzy rule as training patterns of a neural network. Also, this controller uses the back-propagation method to adjust the weights between the neurons of neural network in order to minimize the error between the command output and actual output. A model reference adaptive scheme is proposed in which the adaptation mechanism is executed by fuzzy logic based on the error and change of error measured between the motor speed and output of a reference model. The control performance of the adaptive NFC is evaluated by analysis for various operating conditions. The results of analysis prove that the proposed control system has strong high performance and robustness to parameter variation, and steady-state accuracy and transient response.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.8C
• /
• pp.697-708
• /
• 2010

In this paper, we compare the timing synchronization performance of the adaptive filter to that of the correlator in direct sequence spread spectrum (DS/SS) systems. The test variables used in the code synchronization are statistically analyzed for both schemes, and then the obtained results are used in calculating the detection and false alarm probabilities. Based on the derived probabilities, the synchronization performance is compared and the simulation is followed. Analysis and simulation results show that the correlator outperforms the adaptive filter under most synchronization environments.

• Korean Journal of Remote Sensing
• /
• v.17 no.4
• /
• pp.319-334
• /
• 2001

Extracting primitives from imagery plays an important task in visual information processing since the primitives provide useful information about characteristics of the objects and patterns. The human visual system utilizes features without difficulty for image interpretation, scene analysis and object recognition. However, to extract and to analyze feature are difficult processing. The ultimate goal of digital image processing is to extract information and reconstruct objects automatically. The objective of this study is to develop robust method to achieve the goal of the image processing. In this study, an adaptive strategy was developed by implementing Gabor filters in order to extract feature information and to segment images. The Gabor filters are conceived as hypothetical structures of the retinal receptive fields in human vision system. Therefore, to develop a method which resembles the performance of human visual perception is possible using the Gabor filters. A method to compute appropriate parameters of the Gabor filters without human visual inspection is proposed. The entire framework is based on the theory of human visual perception. Digital images were used to evaluate the performance of the proposed strategy. The results show that the proposed adaptive approach improves performance of the Gabor filters for feature extraction and segmentation.

• Current Optics and Photonics
• /
• v.5 no.2
• /
• pp.101-113
• /
• 2021

Adaptive optics (AO) systems are becoming more complex to improve their optical performance and enlarge their field of view, so it is a hard and time consuming process to set up and optimize the components of AO systems with actual implementation. However, simulations allow AO scientists and engineers to experiment with different optical layouts and components without needing to obtain and prepare them physically. In this paper, we introduce a new AO simulation named the Korea Adaptive Optics Simulation (KAOS), independently developed by LIG Nex1. We verified the performance of KAOS by comparing with other AO simulation tools. In the comparison simulation, we confirmed the results from KAOS and other AO simulation tools were very similar. Also, we proposed a laser tomography AO system with five Rayleigh laser guide stars (LGSs) optimized by using KAOS to overcome the disadvantages of the AO system with a single sodium LGS for the satellite imaging system. We verified the performance of the proposed AO system using KAOS, and the simulation result showed averaged Strehl ratio of 0.37.

• Communications for Statistical Applications and Methods
• /
• v.28 no.5
• /
• pp.411-424
• /
• 2021

Inference following two-stage adaptive designs (also known as two-stage randomization designs) with survival endpoints usually focuses on estimating and comparing survival distributions for the different treatment strategies. The aim is to identify the treatment strategy(ies) that leads to better survival of the patients. The objectives of this study were to assess the performance three commonly cited methods for estimating survival distributions in two-stage randomization designs. We review three non-parametric methods for estimating survival distributions in two-stage adaptive designs and compare their performance using simulation studies. The simulation studies show that the method based on the marginal mean model is badly affected by high censoring rates and response rate. The other two methods which are natural extensions of the Nelson-Aalen estimator and the Kaplan-Meier estimator have similar performance. These two methods yield survival estimates which have less bias and more precise than the marginal mean model even in cases of small sample sizes. The weighted versions of the Nelson-Aalen and the Kaplan-Meier estimators are less affected by high censoring rates and low response rates. The bias of the method based on the marginal mean model increases rapidly with increase in censoring rate compared to the other two methods. We apply the three methods to a leukemia clinical trial dataset and also compare the results.

• Smart Structures and Systems
• /
• v.31 no.5
• /
• pp.437-454
• /
• 2023

Real-time hybrid simulation (RTHS), which has the advantages of a substructure pseudo-dynamic test, is widely used to investigate the rate-dependent mechanical response of structures under earthquake excitation. However, time delay in RTHS can cause inaccurate results and experimental instabilities. Thus, this study proposes a model-based adaptive control strategy using a Kalman filter (KF) to minimize the time delay and improve RTHS stability and accuracy. In this method, the adaptive control strategy consists of three parts-a feedforward controller based on the discrete inverse model of a servohydraulic actuator and physical specimen, a parameter estimator using the KF, and a feedback controller. The KF with the feedforward controller can significantly reduce the variable time delay due to its fast convergence and high sensitivity to the error between the desired displacement and the measured one. The feedback control can remedy the residual time delay and minimize the method's dependence on the inverse model, thereby improving the robustness of the proposed control method. The tracking performance and parametric studies are conducted using the benchmark problem in RTHS. The results reveal that better tracking performance can be obtained, and the KF's initial settings have limited influence on the proposed strategy. Virtual RTHSs are conducted with linear and nonlinear physical substructures, respectively, and the results indicate brilliant tracking performance and superb robustness of the proposed method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.1-11
• /
• 2018

In various engineering fields, determining the appropriate parameter set is a cumbersome and difficult task when solving optimization problems. Despite the appropriate parameter setting through parameter sensitivity analysis, there are limits to evaluating whether the parameters are appropriate for all optimization problems. For this reason, kinds of a Self-adaptive Harmony searches have been developed to solve various engineering problems by the appropriate setting of algorithm's own parameters according to the problem. In this study, various types of Self-adaptive Harmony searches were investigated and the characteristics of optimization were categorized. Six algorithms with a differentiation of optimization process were applied and compared with not only the mathematical optimization problem, but also the engineering problem, which has been applied widely in the algorithm performance comparisons. The performance of each algorithm was compared, and the statistical performance indicators were used to evaluate the application results quantitatively.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.9
• /
• pp.1058-1064
• /
• 2008

In this paper, we proposed a new hybrid interference canceller using the adaptive filter with Grouped CMA(Constant Modulus Algorithm)-LMS(Least Mean Square) algorithm in the RF(Radio Frequency) repeater. The feedback signal generated from transmitter antenna to receiver antenna reduces the performance of the receiver system. The proposed interference canceller has better channel adaptive performance and a lower MSE(Mean Square Error) than conventional structure because it uses the cancellation method of Grouped CMA algorithm. This structure reduces the number of iterations fur the same MSE performance and hardware complexity compared to conventional nonlinear interference canceller. Namely, MSE values of the proposed algorithm were lower than those of LMS algorithm by 2.5 dB and 4 dB according to step sizes. And the proposed algorithm showed fast speed of convergence and similar MSE performance compared to VSS(Variable Step Size)-LMS algorithm.

• The KIPS Transactions:PartC
• /
• v.13C no.3 s.106
• /
• pp.369-374
• /
• 2006

This paper related with the performance improvement of adaptive equalizer that is a based on the tricepstrum eqalization algorithm by using the received signal. Adaptive equalizer used for the improvement of communication performance, like as high speed, maintain of synchronization, BER, at the receive side in the environment of communication channel of the presence of the aditive noise, phase distortion and frequency selective fading, mainly. It's characteristics are nearly same as the inverse characterstics of the communication channel. In this paper, the TEA algorithm using the HOS and the 16-QAM which is 2-dimensional signaling method for being considered signal was used. For the precoding of 16-QAM singnal in the assignment of the signal costellation, Gray code was used, and the improvement of performance was gained by computer simulation in the residual intersymbol interence and mean squared error which is representive measurement of adaptive equalizer.

• The Journal of the Korea Contents Association
• /
• v.20 no.8
• /
• pp.559-571
• /
• 2020

This study was conducted to analyze the effects of person-environment fit on the job performance in the National Assembly legislative support organization. Job performance was classified into task performance, contextual performance, and adaptive performance. Impacts of each factors on the job performance were identified through structural equation model. From the results of analysis, it was confirmed that supplementary fit of officials of legislative support organization of the National Assembly had a positive effect on task performance, contextual performance, and adaptive performance. However, complementary-fit does not directly affect task performance, contextual performance, and adaptive performance. Rather complementary-fit affects job performance by the mediating role of variable self-efficacy. The implications of this study confirm that it is important to match between organization members and jobs in order to improve the job performance of civil servants in the legislative support organization. The necessity of introducing self-efficacy enhancement program into the education and training process of the legislative support organization was proposed.