• Journal of the Korea Institute of Military Science and Technology
• /
• v.1 no.1
• /
• pp.201-210
• /
• 1998

Inertial Navigation System(INS) can provide the vehicle position and velocity information using inertial sensor outputs without the use of external aids. Unfortunately INS navigation error increases with time due to inertial sensor errors, and therefore it is desirable to combine INS with external aids such as GPS, TACAN, OMEGA, and etc.. In this paper we propose an integration algorithm of commercial GPS/GLONASS and INS where an adaptive filter for signal processing of GPS/GLONASS receiver and the 12th order Kalman filter for aided strapdown INS(SDINS) we employed. Simulation results show that the proposed adaptive filter can effectively remove a randomly occurring abrupt jump due to sudden corruption of the received satellite signal and that the Kalman filter performs satisfactorily.

• Journal of Biomedical Engineering Research
• /
• v.22 no.3
• /
• pp.285-291
• /
• 2001

In this paper, we designed two preprocessing adaptive filter - high pass filter and notch filter - using FPGA. For minimizing the calculation load of multi-channel and high-resolution ECG system, we utilize FPGA rather than digital signal processing chip. To implement the designed filters in FPGA, we utilize FPGA design tool(Altera corporation, MAX-PLUS II) and CSE database as test data. In order to evaluate the performance in terms of processing time, we compared the designed filters with the digital filters implemented by ADSP21061(Analog Devices). As a result, the filters implemented by FPGA showed better performance than the filters based on ADSP21061. As a consequence of examination, we conclude that FPGA is a useful solution in multi-channel and high-resolution signal processing.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.5
• /
• pp.848-852
• /
• 2001

The biomedical signals such as ECG, EMG, EEG, and etc are very Important information to diagnose patients The signal is hard to filter the noise because that is mixed with a lot of noise and biomedical signal has the properties of nonlinear and time-variance. So, we will filter under the measure environment for system or patient. But the general adaptive fillet has brought on the distortion of signal because the adaptive filter adjust the filter coefficient with the fixed order of filter, that filter has the unsuitable order in each other environment. So we propose the dynamic structure adaptive filter that is used for improving that disadvantage. In experiment, we obtain the optimal order of adaptive filter and have food results.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.4
• /
• pp.597-602
• /
• 1987

In this paper, an adaptive observe based upon the exponentially weighted least-squares method is implemented in the design of a model reference adaptive controller for an unknown time-invariant discrete single-input single-output linear plant. A method of selecting the state variable filter is proposed. In this scheme, all the past data are weithted exponentially with the weighting coefficient.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.4
• /
• pp.1-9
• /
• 1983

In designing the adaptive recursive filter using the MRAS hyperstable output-error identifier, the most crucial point is the design of the error-smoothing filter In this paper, it is shown that by modifyins the HARF algorithm properly, we can obtain an algorithm which requires no error-smoothing filter and has relatively high convergence rate.

• International Journal of Aeronautical and Space Sciences
• /
• v.15 no.1
• /
• pp.74-81
• /
• 2014

This article documents the design of a novel two-loop acceleration autopilot based on $\mathcal{L}_1$ adaptive output feedback control for tail-controlled missiles. The inner loop is an adaptive angle-of-attack tracking loop and the outer loop is the traditional PI controller for error compensation. A systematic low-pass filter design procedure is provided for minimum phase system and is applied to the inner loop design while the parameters of the outer loop are obtained from the multi-objective optimization problem. The effectiveness of the proposed autopilot is verified through numerical simulations under various conditions.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.7
• /
• pp.81-89
• /
• 1999

Image obtained by incomplete communication always include noise, blur and distortion, etc. In this paper, we propose and apply the new spatial filter algorithm, called an optimal adaptive generalized stack filter(AGSF), which optimizes adaptive generalized stack filter(AGSF) using neural network weight learning algorithm of back-propagation learning algorithm for improving noise removal and edge preservation rate. AGSF divides into two parts: generalized stack filter(GSF) and adaptive multistage median filter(AMMF), GSF improves the ability of stack filter algorithm and AMMF proposes the improved algorithm for reserving the sharp edge. Applied to neural network theory, the proposed algorithm improves the performance of the AGSF using two weight learning algorithms, such as the least mean absolute(LAM) and least mean square (LMS) algorithms. Simulation results of the proposed filter algorithm are presented and discussed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.9 no.9
• /
• pp.679-691
• /
• 2003

The band-width of disk drive servo system is rapidly increasing for the robustness to external disturbance as the track density is increasing. The increase of the band-width may cause mechanical resonance of an actuator. In disk drive servo system, a notch filter is usually used to suppress the mechanical resonance of the actuator. However, the resonance frequency differs from drive to drive because of manufacturing tolerance and varies with temperature even within a single drive. The variation of resonance frequency degrades the suppression performance of the notch filter. In this paper, we present an adaptive digital notch filter that identifies the resonance frequency of the disk drive servo actutaor precisely and adjusts automatically its center frequency. For this, we design an adaptive FIR digital filter for the estimation of the resonance frequency. The estimation filter identifies the resonance frequency adaptively using the output signal generated from the servo system, which is excited with an excitation signal including all the expected resonance frequency components. We prove mathematically the convergence of the resonance frequency estimation filter. Furthermore, in order to demonstrate the practical use of our work, we present some experimental results using a commercially available disk drive.

• International Journal of Aeronautical and Space Sciences
• /
• v.3 no.1
• /
• pp.86-94
• /
• 2002

The initial alignment of inertial platform for navigation system was considered. An adaptive filtering technique is developed for the system with unknown and varying sway disturbance. It is assumed that the random sway motion is the second order ARMA(Auto Regressive Moving Average) model and performed parameter identification for unknown parameters. Designed adaptive filter contain both a Kalman filter and a self-tuning filter. This filtering system can automatically adapt to varying environmental conditions. To verify the robustness of the filtering system, the computer simulation was performed with unknown and varying sway disturbance.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.2
• /
• pp.30-36
• /
• 2002

This paper describes a nonlinear adaptive noise canceler(ANC) using neural networks(NN) based on filter to make up for the drawback of the conventional ANC with the linear adaptive filter. The proposed ANC was tested its noise rejection performance using broadband time-varying noise signal and compared with the ANC of TDL linear filter. Experimental results show that in cases of nonlinear correlations between the noise of primary input and reference input, the neural network based ANC outperforms the linear ANC with respect to mean square error It is also verified that the recurrent NN adaptive filter is superior to the feedforward NN filter. Thus, we identify that the NN adaptive filter is more effective than the linear adaptive filter for rejection of broadband time-varying noise in the ANC.