• Journal of Communications and Networks
• /
• v.12 no.4
• /
• pp.358-365
• /
• 2010

We develop a low complexity cooperative diversity protocol for low energy adaptive clustering hierarchy (LEACH) based wireless sensor networks. A cross layer approach is used to obtain spatial diversity in the physical layer. In this paper, a simple modification in clustering algorithm of the LEACH protocol is proposed to exploit virtual multiple-input multiple-output (MIMO) based user cooperation. In lieu of selecting a single cluster-head at network layer, we proposed M cluster-heads in each cluster to obtain a diversity order of M in long distance communication. Due to the broadcast nature of wireless transmission, cluster-heads are able to receive data from sensor nodes at the same time. This fact ensures the synchronization required to implement a virtual MIMO based space time block code (STBC) in cluster-head to sink node transmission. An analytical method to evaluate the energy consumption based on BER curve is presented. Analysis and simulation results show that proposed cooperative LEACH protocol can save a huge amount of energy over LEACH protocol with same data rate, bit error rate, delay and bandwidth requirements. Moreover, this proposal can achieve higher order diversity with improved spectral efficiency compared to other virtual MIMO based protocols.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.581-584
• /
• 2003

본 논문에서는 링크 상황에 따라서 변복조 방식과 코딩 방식을 달리하는 기술인 AMC(Adaptive Modulation and Coding)기능과 연동하는 2 단계 ARQ(Automatic Repeat Request)방식을 제안하여 한정된 무선채널을 여러 종류의 서비스와 여러 가입자가 동시에 공유하는 경우에 발생되는 QoS(Quality of Service) 문제를 해결하고자 한다. 제안한 2 단계 ARQ 방식은 MAC(Medium Access Control) 계층에 위치하여 상위 계층으로부터 IP(Internet Protocol) packet 를 수신한 후 2 단계의 ARQ 동작을 수행함으로써 물리 채널에서 전송 중에 발생되는 오류 확률을 감소시킨다. 따라서 TCP(Transmission Control Protocol)단에서의 재전송 감소에 의한 향상된 성능도 기대할 수가 있겠다.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.1
• /
• pp.43-47
• /
• 2021

This paper investigates the network throughput of PLC (Power Line Communication) system in the in-building network. The OFDM (Orthogonal Frequency Division Multiplexing) modulation format and adaptive bit loading algorithm is used to minimize the effect of signal loss and noise on transmission performance in the power line channel characterized by frequency selective fading. The network throughput of the PLC system which consists of gateway and CPE（Customer Premise Equipment) PLC modem in the in-building network is measured by network performance measurement tool, iperf and analyzed according to the TCP (Transmission Control Protocol) window size.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.4
• /
• pp.53-58
• /
• 2012

The roadside unit (RSU) collects vehicle information from vehicles in the intelligent transportation system (ITS). The vehicle density on the road within the communication range of a RSU is a time varying parameter. The higher the vehicle density, the more vehicle information can be collected. Therefore, the probability of packet collision will be raised. In this paper, an adaptive transmission scheme is proposed to improve the probability of packet reception rate by changing the data rate and transmission period according to the vehicle density. The performance of IEEE 802.11p MAC protocol that is a standard for vehicular communications is evaulated in terms of the vehicle density with the ns-2,33 simulator.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1993.06a
• /
• pp.273-275
• /
• 1993

The throughput of conventional ARQ protocols can be improved by dynamically adapting the packet length. This protocol transmits packets with the length to maximize the transmission efficiency, based on the dynamic estimation of time-varying channel condition. A very simple adaptive scheme is presented. The results of a simulation show that the scheme performs well.

• ETRI Journal
• /
• v.35 no.1
• /
• pp.146-149
• /
• 2013

We propose a reconciliation sublayer (RS)-based lane and traffic control protocol for energy-efficient 40-G/100-G Ethernet. The RS performs active/inactive lane control and data rate adaptation depending on active lane information received from the upper layer. This protocol does not result in a processing delay in the media access control layer, nor is an additional buffer required at the physical layer for dynamic lane control. It ensures minimal delay and no overhead for the exchange of control frames and provides a simple adaptive data rate.

• Journal of KIISE
• /
• v.41 no.10
• /
• pp.824-831
• /
• 2014

HTTP (Hypertext Transfer Protocol) Adaptive Streaming is gaining attention because it changes bitrates to adapt changing network conditions. Since HAS (HTTP Adaptive Streaming) client downloads the video data based on TCP (Transmission Control Protocol), it estimates incorrectly the available bandwidth and leads to an unnecessary video quality change in long-delay networks. In this paper, we propose a buffer-based quality control scheme in order to improve the service quality and smooth playback in the HAS. The proposed scheme estimates accurately the available bandwidth based on a modified streaming model that considers network delay. It also calculates the sustainability of the video quality to prevent an unnecessary quality change and determines the inter-request time on the basis of the buffer status. Through the simulation, we prove that our scheme improves the QoS (Quality of Service) of the HAS service and controls the video quality smoothly in long-delay networks.

• Journal of Korea Multimedia Society
• /
• v.21 no.5
• /
• pp.592-598
• /
• 2018

In wireless sensor networks where there is no centralized base station, each node has limited transmission range and the multi-hop routing for transmitting data to the destination is the one of the important technical issues. In particular, the wireless sensor network is not powered by external power source but operates by its own battery, so it is required to maximize the network life through efficient use of energy. To balance the power consumption, the residual power based adaptive power control is required in routing protocol. In this paper, we propose a routing protocol that prolongs the network lifetime by balancing the power consumption among the nodes by controlling the transmit power according to the residual power. We evaluate the proposed routing protocol using extensive simulation, and the results show that the proposed routing scheme can balance the power consumption and prolong network lifetime.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1229-1234
• /
• 2012

In this paper, we analyze the problems that the DDS middleware, which is a standard data-centric communication interface, uses the fixed packet transmission method by the pre-defined protocol for exchanging data packets. The packet transmission method selected in a fixed manner cannot handle appropriately the increasing of resource overhead in an environment where the load of the DDS network changes dynamically. If the load on the node and network exceeds the threshold, the performance of the packet transmission may be degraded rapidly. This results in a failure of ensuring the real-time characteristic of DDS middleware. To solve this problem, we propose the scheme of the adaptive packet transmission for adjusting the transmission method in real-time based on the overhead on the DDS network.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.139-145
• /
• 2015

This paper proposes to increase the node energy effienciecy, which rapidly drops during the transmission of LEACH (Low Energy Adaptive Clustering Hierachy), using the method of DL-LEACH (Dual-hop Layered LEACH). By introducing dual-hop method in the data transmission, the proposed single-hop method for short-range transmission and multi-hop transmission method between the cluster heads for remote transmission was introduce. By introducing a partial multi-hop method in the data transmission, a single-hop method for short range transmission method between the cluster heads for remote transmission was introduces. In the proposed DL-LEACH, the energy consumption of cluster head for remote transmission reduces and increases the energy efficiency of sensor node by reducing the transmission distance and simplifying the transmission routine for short-range transmission. As compared the general LEACH, it was adapted to a wider sensor field.