• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.420-420
• /
• 2000

In this paper, we propose an adaptive controller using RBFN(radial basis function network) for robot manipulators The structure of the proposed controller consists of a RBFN and VSC-1 ike control. RBFN is used in order to approximate かon system, and VSC-like control to guarantee robustness On the basis of the Lyapunov stability theorem, we guarantee the stability for the total system. And the learning law of RBFN is established by the Lyapunov method, Finally, we apply the proposed controller to tracking control for a 2 link SCARA type robot manipulator.

• Proceedings of the KSRS Conference
• /
• 1998.09a
• /
• pp.268-273
• /
• 1998

This study applies an on-line system, which employes an adaptive reconstruction technique to monitor and forecast ocean surface changes. The system adaptively generates an appropriate synthetic time series with recovering missing measurements for sequential images. The reconstruction method incorporates temporal variation according to physical properties of targets and anisotropic spatial optical properties into image processing techniques. This adaptive approach allows successive refinement of the structure of objects that are barely detectable in the observed series. The system sequentially collects the estimated results from the adaptive reconstruction and then statistically analyzes them to monitor and forecast the change in surface characteristics.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.2
• /
• pp.119-124
• /
• 1988

Real-time adaptive lattice predictor was implemented on the TMS32020 DSP chip for digital signal processing. The implemented system was composed of Input-Output units and centrla processing-control unit and its supporting assembly soft ware. The performance of hardware realization was verified by comparing input signal and one-step prediction signal which are calcualted by the real-time adaptive lattice predictor. As a result, for 4 stage lattice structure, the maximum running frequency was obtained as 6.41 KHz in this experiment.

• Proceedings of the KIEE Conference
• /
• 2003.07d
• /
• pp.2441-2443
• /
• 2003

This paper proposes an indirect adaptive fuzzy controller for general SISO nonlinear systems. No a priori information on bounding constants of uncertainties including reconstruction errors and optimal fuzzy parameters is needed. The control law and the update laws for fuzzy rule structure and estimates of fuzzy parameters and bounding constants are determined so that the Lyapunov stability of the whole closed loop system is guaranteed. The computer simulation results for an inverted pendulum system show the performance of the proposed robust adaptive fuzzy controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.443-443
• /
• 2000

A systematic scheme is developed fer the design of new adaptive feedback linearizing controllers for nonlinear systems. The developed adaptation law estimates the uncertain time-varying parameters using the structure of diffeomorphisrn. Our scheme is applicable to a class of nonlinear systems which violates the restrictive parametric-pure-feedback condition [4]-[6].

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.17-20
• /
• 2008

A clustering scheme for ad hoc networks is aimed at managing a number of mobile devices by utilizing hierarchical structure of the networks. In order to construct and maintain an effective hierarchical structure in ad hoc networks where mobile devices may move at high mobility, the following requirements must be satisfied. The role of each mobile device for the hierarchical structure is adaptive to dynamic change of the topology of the ad hoc networks. The role of each mobile device should thus change autonomously based on the local information. The overhead for management of the hierarchical structure is small. The number of mobile devices in each cluster should thus be almost equivalent. This paper proposes an adaptive multihop clustering scheme for highly mobile ad hoc networks. The results obtained by extensive simulation experiments show that the proposed scheme does not depend on mobility and node degree of mobile devices in the ad hoc network, which satisfy the above requirements.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.10a
• /
• pp.86-91
• /
• 2000

Automatic method for generation of mesh and three dimension natural convection flow result adapted by this method are presented in this paper. It lake long time to meshing com plex 3-D geometries, and It's difficult to clustering grid at surface boundary. Octree structure resolve this difficulty.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1992.06a
• /
• pp.23-28
• /
• 1992

The purpose of this paper is to develop a new adaptive echo canceller improving convergence speed and near-end-talker detection performance of the conventional echo canceller. In a conventional adaptive echo canceller, an adaptive digital filter with TDL(Tapped-Delay Line) structure modelling the echo path uses the LMS(Least Mean Square) algorithm to cote the coefficients, and NET detector using energy comparison method prevents the adaptive digital filter to update the coefficients during the periods of the NET signal presence. The convergence speed of the LMS algorithm depends on the eigenvalue spread ratio of the reference signal and NET detector using the energy comparison method yields poor detection performance if the magnitude of the NET signal is small. This paper presents a new adaptive echo canceller which uses the pre-whitening filter to improve the convergence speed of the LMS algorithm. The pre-whitening filter is realized by using a low-order lattice predictor. Also, a new NET signal detection algorithm is presented, where the start point of the NET signal is detected by computing the cross-correlation coefficient between the primary input and the ADF(Adaptive Digital Filter) output while the end point is detected by using the energy comparison method. The simulation results show that the convergence speed of the proposed adaptive echo canceller is faster than that of the conventional echo canceller and the cross-correlation coefficient yield more accurate detection of the start point of the NET signal.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.12
• /
• pp.1220-1230
• /
• 2006

In this paper, we propose a flew technique to the design and real-time control of an adaptive controller for robotic manipulator based on digital signal processors. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved Lyapunov second method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot manipulator with eight joints. joint space and cartesian space.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.10
• /
• pp.94-104
• /
• 1996

This paper presents a new approach to the design of adaptive control system using DSPs(TMS320C31) for robotic manpulators to achieve accurate trajectory tracking by the joint angles Digital signal processors are used in implementing real time adaptive control algorithms to provide an enhanced motion control for robotic manipulators. In the proposed contorl scheme, adaptation laws are derived from the improved Lyapunov second stability analysis method based on the adaptive model reference control theory. The adaptive controller consists of an adaptive feedforward controller, feedback controller, and PID type time varying auxillary control elements. The proposed adaptive control scheme is simple in structure, fast in computation, and suitable for implementation of real-time control. Morever, this scheme does not require an accurate dynamic modeling nor values of manpipulator parameters and payload. Performance of the adaptive controller is illustated by simulation and experimental results for a SCARA robot.