• 대한기계학회논문집
• /
• 제11권2호
• /
• pp.234-242
• /
• 1987

본 논문에서는 변분법으로 유도한 최적조건을 수치계산에 적용키 위해 영역적 응법이 사용되었으며 불규칙한 형상의 방지에는 격자 적응법이 제시되었다. 설계 문 제로는 '국부 응력치의 일정 한도내에서 구조물 무게의 최소화' 또는 대등한 문제로 '제한된 구조물의 무게한도내에서 최대 국부응력치의 최소화'를 다루었다.

• 전력전자학회논문지
• /
• 제26권6호
• /
• pp.381-389
• /
• 2021

Most diagnosis approaches rely on historical failure data that might not be feasible in real operating conditions because the battery voltage and internal parameters are nonlinear according to various operating conditions, such as cell-to-cell configuration and initial condition. To overcome this issue, the estimator and the predictor require integrated approaches that consider comprehensive data, with the degradation process and measured data taken into account. In this paper, vector autoregressive models (VAR) with various parameters that affect overdischarge to the cell in the battery pack were constructed, and the cell-to-cell parameters were identified using an adaptive model to analyze the influence of failure prognosis. The theoretical analysis is validated using experimental results in terms of the feasibility and advantages of fault prognosis.

• 한국멀티미디어학회논문지
• /
• 제19권5호
• /
• pp.901-909
• /
• 2016

Unprecedented attention is being given to Smart Grid, Micro Grid and Internet of Things (IoT) in the Republic of Korea recently but such systems' effect is not well experienced by the market since they require additional and costly reforms for the existing household electrical system where adaptive communication platforms are needed. As such platforms, both wireless and wire communication technologies are being considered at the moment. Usually, they include WiFi, Zigbee technologies and the latter, LAN technology. However, communication speed decline due to signal attenuation and interference during wireless communications are considered to be the major problem and the extra works involving time and costs for the LAN system construction can be another demerit. Therefore, in this paper, we have introduced a Power Line Communication-based Smart Outlet System Expandable at Home to complement these disadvantages. Proposed IoT system involves Power Line Communication (PLC) technology which is essential to constructing a Smart Grid.

• International Journal of Internet, Broadcasting and Communication
• /
• 제8권3호
• /
• pp.69-77
• /
• 2016

Maximum utilization of unused license spectrum is one of key factor in cognitive radio network which can handle the large number of systems and devices connected on smart grid AMI network. The central intelligence control system has responsibility to accept new technologies and users for automation. To ensure a reliable communication in smart grid system through cognitive network, a minimum mean square error (MSE) signal using unused licensed spectrum (or frequency) is necessary to be detected with small decision error. In this paper, we introduce a user control wireless smart grid system with minimum MSE using LMS algorithm.

• Journal of Electrical Engineering and Technology
• /
• 제13권5호
• /
• pp.1807-1813
• /
• 2018

In this paper, the fault line selection and location problems of single line-to-ground (SLG) fault in distribution network are addressed. Firstly, the adaptive filtering property for empirical mode decomposition is formulated. Then in view of the different characteristics showed by the intrinsic mode functions(IMF) under different fault inception angles obtained by empirical mode decomposition, the sign of peak value about the low-frequency IMF and the capacitance transient energy is chosen as the fault line selection criteria according to the different proportion occupied by the low-frequency components. Finally, the fault location is determined based upon the comparison result with adjacent fault passage indicators' (FPI) waveform on the strength of the interaction between the distribution terminal unit(DTU) and the FPI. Moreover, the logic nodes regarding to fault line selection and location are newly expanded according to IEC61850, which also provides reference to acquaint the DTU or FPI's function and monitoring. The simulation results validate the effectiveness of the proposed fault line selection and location methods.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.226-234
• /
• 2006

Photovoltaic (PV) generators have nonlinear V-I characteristics and maximum power points which vary with illumination level and temperature. Using a maximum power point tracker (MPPT) with an intermediate converter can increase the system efficiency by matching the PV systems to the load. This paper presents a maximum power point tracker based on fuzzy logic and a control scheme for a single-phase inverter connected to the utility grid. The fuzzy logic controller (FLC) provides an adaptive nature for system performance. Also the FLC provides excellent features such as fast response, good performance and the ability to change the fuzzy parameters to improve the control system. A single-phase AC-DC inverter is used to connect the PV system to the grid utility and local loads. While a control scheme is implemented to inject the PV output power to the utility grid at unity power factor and reduced harmonic level. The simulation results have shown the effectiveness of the proposed scheme.

• 컴퓨터교육학회논문지
• /
• 제11권5호
• /
• pp.67-76
• /
• 2008

그리드 컴퓨팅은 지리적으로 분산되어 있는 기관들의 자원을 공유하여 협동 작업을 가능하게 하는 대규모 가상 컴퓨팅 환경이다. 최근 들어, 무선 통신망과 모바일 기기의 발달은 모바일 기기를 자원으로 이용 가능하도록 하고 있다. 하지만, 그리드 컴퓨팅에서 모바일 기기를 자원으로 이용하고자 하는 시도는 모바일 기기의 제약사항인, 낮은 프로세서 성능, 작은 메모리 용량, 한정된 배터리 용량, 낮은 통신 대역폭 등으로 어려움이 많다. 이에 본 논문에서는 모바일 그리드 환경에서 발생하는 제약사항의 극복을 위하여 프록시 기반 모바일 그리드 시스템을 제안하였다. 제안한 프록시 기반 모바일 그리드 시스템은 모바일 라우터를 사용하여 모바일 그리드 컴퓨팅 환경에서 모바일 기기가 자원 이용자 역할 뿐만 아니라 자원 제공자 역할도 수행할 수 있도록 하여, 기존 유선 그리드와의 협업 작업이 가능하도록 하였다. 또한, 본 논문에서 제안한 시스템에서 모바일 장치의 상태변화에 대처할 수 있는 적응적 작업 스케줄링 기법을 제안한다. 그리고 제안한 작업 스케줄링 기법의 타당성을 검증하기 위해 SimGrid 시뮬레이션 도구를 사용하여 다른 작업 스케줄링 기법과 비교 분석하였다.

• International journal of advanced smart convergence
• /
• 제9권2호
• /
• pp.8-19
• /
• 2020

We see an energy fucused smart city evolution of the UK along with the project of "Smart London Plan (SLP)." A theoretical logic of business model innovation has been discussed and a research framework of evolving energy focused smart city is formulated. The starting point is the silo system. In the second stage, the private investment in smart meters establishes a basement for next stages. As results, the UK's smart energy sector has evolved from smart meter installation through smart grid to new business models such as water-energy nexus and microgrid. Before smart meter installation of the government, the electricity system was centralized. However, after consumer engagement plan has been set to make them understand benefits that they can secure through smart meters, the customer behavior has been changed. The data analytics firm enables greater understanding of consumer behavior and it helps energy industry to be smart via controlling, securing and using that data to improve the energy system. In the third stage, distribution network operators (DNOs)' access to smart meter data has been allowed and the segmentation starts. In the fourth stage, with collaboration of Ofwat and Ofgem, it is possible to eliminate unnecessary duplication of works and reduce interest conflict between water and electricity. In the fifth stage, smart meter and grid has been integrated as an "adaptive" system and a transition from DNO to DSO is accomplished for the integrated operation. Microgrid is a prototype for an "adaptive" smart grid. Previous steps enable London to accomplish a platform leadership to support the increasing electrification of the heating and transport sector and smart home.

• 대한조선학회논문집
• /
• 제51권5호
• /
• pp.409-418
• /
• 2014

Simulation of flow past a complex marine structure requires a fine resolution in the vicinity of the structure, whereas a coarse resolution is enough far away from it. Therefore, a lot of grid cells may be wasted, when a simple Cartesian grid system is used for an Immersed Boundary Method (IBM). To alleviate this problems while maintaining the Cartesian frame work, we adopted an Adaptive Mesh Refinement (AMR) scheme where the grid system dynamically and locally refines as needed. In this study, We implemented a moving IBM and an AMR technique in our basic 3D incompressible Navier-Stokes solver. A Volume Of Fluid (VOF) method was used to effectively treat the free surface, and a recently developed Lagrangian Dynamic Subgrid-scale Model (LDSM) was incorporated in the code for accurate turbulence modeling. To capture vortex induced vibration accurately, the equation for the structure movement and the governing equations for fluid flow were solved at the same time implicitly. Also, We have developed an interface by using AutoLISP, which can properly distribute marker particles for IBM, compute the geometrical information of the object, and transfer it to the solver for the main simulation. To verify our numerical methodology, our results were compared with other authors' numerical and experimental results for the benchmark problems, revealing excellent agreement. Using the verified code, we investigated the following cases. (1) simulating flow around a floating sphere. (2) simulating flow past a marine structure.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.397-400
• /
• 2010

충격파 유도 연소장에서의 적응격자기법의 유용성을 확인하기 위하여 화학반응식을 포함한 2차원 Euler 방정식을 이용하여 삼각형 비정렬 적응격자계에서 계산을 수행하였다. 2차원 쐐기형상에 대하여 냉가스 및 열가스 유동 해석을 수행하였다. 적응격자를 이용하여 경사충격파에서 폭굉파로의 천이를 잘 관찰 할 수 있었고, 유도영역, 천이영역, 폭굉영역 등의 특성을 잘 모사하는 것을 확인 할 수 있었다. 본 연구를 통하여 연소장이 포함된 고속압축성 유동장에서의 비정렬 적응격자의 유용성을 확인 할 수 있었다.