• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.399-406
• /
• 2002

We consider design of multiservice network link, in which connections of constant- and adaptive-rate services arrive and leave dynamically. We propose performance analysis and design methods of these dynamic multiservice networks. A multiservice network link is modeled by a Markov chain, and data rates for adaptive-rate connections are derived using QBD (Quasi-Birth-Death) processes and matrix-geometric equations. We estimate average number of adaptive-rate connections, average data rate and average connection delay. The performance of constant-rate connections is determined from the blocking probability of the connections. Based on the performance of constant-and adaptive- rate connections, we propose a design methods of a network link to satisfy performance requirements of constant- and adaptive-rate connections (data rates, delay, blocking probability). Our methods can be used for the analysis and design of network switch supporting dynamic data and voice (video) traffic simultaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.9A
• /
• pp.1013-1021
• /
• 2004

In the WCDMA mobile multimedia communication system, the adaptive array antenna IS adopted to improve the performance of the system by reducing inter-user interference using antenna beam control. Usually, the interference resulted from the higher data rate users is much more significant to the lower data rate users than the other way around, so the overall performance can be enhanced by reducing the interference from higher data rate users. In order to maximize the efficiency of adaptive antenna operation, an optimal call admission control, especially during handoff, adaptive to the data rates is a critical problem. In this paper, We propose a call admission control algorithm based on the Soft QoS concept for the efficient processing of the handoff of higher data rate calls, and an adaptive handoff control mechanism according to the data rates. The proposed algorithm has been evaluated by computer simulation that it accommodates high data rate users among many lower data rate users much better, and the average call blocking probability for lower rate users becomes much lower than the conventional call admission control algorithm.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.501-506
• /
• 2010

The proposal set out in this paper, is the Adaptive-MCM(Modulation, Coding and MIMO) system, which results from the combination of adaptive modulation and coding (AMC) and multiple input multiple output (MIMO) schemes. The performance of this system is analyzed through computer simulation. By using the MIMO scheme adaptively as well, the proposed Adaptive-MCM system, presents a better improvement of data rate and error performance compared to the AMC system. The throughput performance of the Adaptive-MCM system is analyzed and compared with the throughput performance of Non-Adaptive-MCM Systems. As a result of the simulation, we can infer that, at a fixed MCM level, there is an improvement of the trade-off between secure Signal to Noise Ratio (SNR) and a high data rate. Consequently, this trade-off improvement results in a better average data rate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.12
• /
• pp.4624-4642
• /
• 2014

Image compression is a popular research issue that focuses on the problems of reducing the size of multimedia files. Vector Quantization (VQ) is a well-known lossy compression method which can significantly reduce the size of a digital image while maintaining acceptable visual quality. A locally adaptive scheme (LAS) was proposed to improve the compression rate of VQ in 1997. However, a LAS needs extra indicators to indicate the sources, consequently the compression rate of LAS will be affected. In this paper, we propose a novel method to eliminate the LAS indicators and so improve the compression rate. The proposed method uses the concept of data hiding to conceal the indicators, thus further improving the compression rate of LAS. From experimental results, it is clearly demonstrated that the proposed method can actually eliminate the extra indicators while successfully improving the compression rate of the LAS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.3
• /
• pp.637-644
• /
• 2004

This paper proposed and implemented the adaptive transmission middleware for video streaming, which is able to support the adaptive transmission of video data to the fluctuating changes of network environment in the packet-based network and the properties of transmitted video data. The adaptive transmission middleware is made up SR-RTP-based transfer module and TFRC(TCP Friendly Rate Control)-based transfer-rate control module. The SR-RTP-based transfer module supports RTP-based real-time transfer of video data and packet retransmission scheme retransmitting the high-priority packets selectively in the damaged video data to reduce the error induced by the packet loss. Sharing the transmission bandwidth of network with the TCP-based data transfer, the TFRC-based transfer-rate control module controls the transfer rate of video data according to the most allowable transmission bandwidth in the network, so that the transfer rate is controlled adaptively to the fluctuating changes of transmission bandwidth. This paper, for the experiment, applied the adaptive transmission middleware to video streaming in the external Internet environment, and analyzed the effective frame transfer rate and the degree of the streaming jitter to evaluate the performance of packet-loss recovery and adaptive transfer rate control. In the external Internet environment where the packet-loss rate is high a bit, the relatively high streaming performance was showed compared with the case that didn't apply the adaptive transmission middleware.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.476-483
• /
• 2010

If the data are pre-whitened, then gradient adaptive algorithms which are simpler than higher order statistics algorithms can be used in adaptive blind signal estimation. In this paper, we propose a blind subband affine projection algorithm for multiple-input multiple-output adaptive equalization in the blind environments. All of the adaptive filters in subband affine projection equalization are decomposed to polyphase components, and the coefficients of the decomposed adaptive sub-filters are updated by defining the multiple cost functions. An infinite impulse response filter bank is designed for the data pre-whitening. Pre-whitening procedure through subband filtering can speed up the convergence rate of the algorithm without additional computation. Simulation results are presented showing the proposed algorithm's convergence rate, blind equalization and blind signal separation performances.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.3A
• /
• pp.406-411
• /
• 2000

In wireless ATM system, powerful FEC code is required for highly reliable data transmission. In this paper, we propose an adaptive hybrid ARQ scheme using RCPSCCC for WATM system. The code rate of RCPSCC is adjusted to match channel conditions and data types. By using only the effective free distances of outer and inner encoders, we derive upper bounds of the bit and word error probabilities over Rayleigh and Rician fading channels. By applying RCPSCC to the adaptive hybrid ARQ protocol, highly reliable data transmission can be achieved.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.12A
• /
• pp.1862-1867
• /
• 1999

In wireless ATM system, powerful FEC code is required for highly reliable data transmission. In this paper, we propose an adaptive hybrid ARQ scheme using RCPSCCC for WATM system. The code rate of RCPSCCC is adjusted to match channel conditions and data types. By using only the effective free distances of outer and inner encoders, we derive upper bounds of the bit and word error probabilities over Rayleigh and Rician fading channels. By applying RCPSCCC to the adaptive hybrid ARQ protocol, highly reliable data transmission can be achieved.

• International Journal of Reliability and Applications
• /
• v.2 no.3
• /
• pp.199-207
• /
• 2001

The failure rate functions between successive failures are of concatenated form. We allow the parameters of failure rate function change after a certain failure and its fixing. We confine out attention to a model wherein the interfailure times are described by its failure rate function. We suggest an adaptive failure rate function with a change-point under the assumption that interfailure times are record value statistics from a Weibull distribution. The proposed model will be applied through a practical example of software failure data.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.4C
• /
• pp.200-206
• /
• 2005

Adaptive transmission techniques can improve the performance of wireless communication system by adaptively changing the transmission parameter such as modulation, code-rate, and power according to the channel state. For orthogonal frequency division multiplexing (OFDM) system, the adaptive transmission techniques can be applied to each subcarrier unit. In this paper, we consider the adaptive code-rate OFDM system in which optimal code-rate is applied to each subcarrier according to the subchannel state. Performance analysis show that $3\sim6$dB gain of SNR or up to $30\sim50\%$ increase of data rate are achieved in the condition of bit error rate $10^{-6}$.