• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.350-356
• /
• 2008

The recent networks are trending toward wireless networks. So wireless internet used to service of wired networks. But wireless networks can't show same performance of wired networks. Therefore, we are must concerned about Routing Protocol for improvement of a weak point of physical feature. But many researchers are not focusing on developing Routing Protocol. In this paper, we improve on AODV(Ad-hoc On-demand Distance Vector) for Wireless Mesh Networks. And it analyzed the result of simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.920-926
• /
• 2007

Establishing a fixed path for the message delivery through a wireless network is impossible due to the mobility. Among the number of routing protocols that have been proposed for wireless ad-hoc networks, the AODV(Ad-hoc On-demand Distance Vector) algorithm is suitable in the case of highly dynamic topology changes, along with ZigBee Routing(ZBR), with the exception of route maintenance. Accordingly, this paper introduces a routing scheme focusing on the energy efficiency and route discovery time for wireless alarm systems using IEEE 802.15.4-based ZigBee. Essentially, the proposed routing algorithm utilizes a cluster structure and applies ZBR within a cluster and DSR (Dynamic Source Routing) between clusters. The proposed algorithm does not require a routing table for the cluster heads, as the inter-cluster routing is performed using DSR. The performance of the proposed algorithm is evaluated and compared with ZBR using an NS2 simulator. The results confirm that the proposed Cluster-based AODV (CAODV) algorithm is more efficient than ZBR in terms of the route discovery time and energy consumption.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2006.06a
• /
• pp.749-753
• /
• 2006

최근 Mobile Ad-hoc Networks(MANET)에서 보안 요소를 추가한 라우팅 연구가 활발히 진행되어 왔다. 하지만 기존 연구들은 대부분 secure 라우팅 또는 패킷 자체에 대한 악의적인 행위가 이루어지는 부분 중 어느 한 측면에 대해서만 연구되어져 왔다. 이와 같은 방법들은 악의적인 노드를 확인하더라도 라우팅 경로 설정과정에서 악의적인 행위가 이루어지거나 라우팅 경로 설정에 대한 공격은 차단하더라고 패킷에 대한 악의적인 행위가 이루어지면 네트워크 내 보안 측면에서 큰 효율성을 기대할 수 없다. 따라서 본 논문에서는 일정기간 악의저인 행위가 이루어지는 노드를 확인하여 각 노드에 대한 신뢰단계를 구성 후, 획득한 각 노드의 신뢰레벨에 따라 라우팅 경로를 설정함으로써 패킷 및 라우팅 경로 설정에 대해 이루어질 수 있는 악의적인 행위를 효율적으로 대응 할 수 있는 방안인 IMSec(A identification of malicious node and secure communications in MANET)을 제안한다. IMSec은 AODV(Ad-hoc On-demand Distance Vector Routing)를 기반으로 하였다. NS-2 네트워크 시뮬레이션 결과를 통해, 제안된 IMSec은 기존 프로토콜보다 네트워크의 부하를 감소시킨 상태에서 악의적인 노드를 더 정확하고 신속하게 찾아냄을 보였다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.520-524
• /
• 2007

제한된 전지를 사용하는 노드들로 이루어진 이동 애드혹 네트워크 환경에서 멀티 홉 간의 에너지 효율적인 경로 설정은 매우 중요한 이슈이다. 이러한 문제를 해결하기 위해서 본 논문에서는 이동 애드혹 네트워크 환경에서 자주 사용되는 라우팅 프로토콜 중 하나인 AODV(Ad-hoc On-demand Distance Vector) 라우팅 프로토콜을 기반으로, 네트워크 계층과 MAC계층의 자원을 크로스 레이어 기법을 활용하여 에너지 효율적인 크로스 레이어 라우팅 프로토콜을 제안한다. 네트워크 계층에서의 이웃노드에 관한 상태 정보를 크로스 레이어 기법을 활용하여 MAC 계층의 back-off time을 적절히 조절함으로써 프레임의 충돌을 줄이고, 패킷의 경로를 설정하는데 있어서 신뢰성과 효율성을 부여하기 위한 방법으로 MAC계층의 자원을 활용하여 얻은 Collision-Level을 사용한다. 또한 Collision Level은 패킷 경로 선택에 사용되는 지연시간을 적응성 있게 줄이는 자원으로 사용된다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.9-17
• /
• 2009

A Mobile Ad hoc network(MANET) is a network consisting of a set of wireless mobile nodes, which communicate with each other without centralized control or established infrastructure. In this paper, to obtain a better understanding of AODV(Ad hoc On-Demand Distance Vector Routing Protocol)and OLSR(Optimized Link State Routing Protocol) routing protocols, different performances are simulated and analyzed using OPNET modeler 14.5 with the various performance metrics, such as packet delivery ratio, end-to-end delay and routing overhead. As a conclusion, in static analysis, the routing overhead of OLSR is affected by the number of nodes, but not data traffic. In AODV case, it is affected by both data traffic and number of nodes. In mobility analysis, routing overhead is not greatly affected by mobility speed in AODV and OLSR, and the PDR(Packet Delivery Ration) of OLSR is decreased as the node speed increased, while AODV is not changed. AS to delay, AODV is always higher than OLSR in both static and nobility cases.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.11
• /
• pp.141-149
• /
• 2013

IETF 6LoWPAN standard technique has been studied in IoT environment to support the IPv6 packet communication. 6LoWPAN protocol for transmission of packets mainly in the AODV routing protocol and a variety of extended techniques have been investigated. In particular, consisting of nodes with limited resources in a network error occurs when the 6LoWPAN reliable data transfer and fast routing method is needed. To this end, in this paper, we propose resilient routing protocol and extension of IETF LOAD algorithm, for optimal recovery path, More specifically, the optimal recovery path setup algorithm, signal flow, and detailed protocols for the verification of the reliability of packet transmission mathematical model is presented. The proposed protocol techniques to analyze the performance of the NS-3 performance through the simulation results that is end-to-end delay, throughput, packet delivery fraction and control packet overhead demonstrated excellence in comparison with existing LOAD.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.7
• /
• pp.1565-1570
• /
• 2014

In networking communication, nodes and base station send data to each nodes and destination nodes. In this perspective, it is very important to determine the direction in which data sent to each nodes or destination nodes. Ad-hoc routing protocol is a standard routing protocol that determines how the packets sent to destination. Ad-hoc routing protocol includes protocols such as Ad-hoc On-demand Distance Vector (AODV) and Dynamic Source Routing (DSR). In our efficient proposed protocol based on small end-to-end sequence numbers, route direction can be changed properly with the assistance of helper nodes. In this paper, we focus on the simulation analysis of proposed protocol and comparison with other routing protocol models such as AODV and DSR. We simulated using Network Simulator (NS-2) by parameters such as simulation time, number of nodes and packet size based on our metrics (packet delivery fraction, routing load, data throughput). Our proposed protocol based on small end-to-end sequence numbers shows better performance and superior to other two protocols.

• International Journal of Computer Science & Network Security
• /
• v.21 no.12
• /
• pp.1-8
• /
• 2021

In Mobile Ad-Hoc Network (MANET) Application, routing protocol is essential to ensure successful data transmission to all nodes. Ad-hoc On-demand Distance Vector (AODV) Protocol is a reactive routing protocol that is mostly used in MANET applications. However, the protocol causes Route Request (RREQ) message flooding issue due to the broadcasting method at the route request stage to find a path to a particular destination, where the RREQ will be rebroadcast if no Request Response (RREP) message is received. A scalable neighbor-based routing (SNBR) protocol was then proposed to overcome the issue. In the SNBR protocol, the RREQ message is only rebroadcast if the number of neighbor nodes less than a certain fix number, known as drop factor. However, since a network always have a dynamic characteristic with a dynamic number of neighbor nodes, the fix drop factor in SNBR protocol could not provide an optimal flooding problem solution in a low dense network environment, where the RREQ message is continuously rebroadcast RREQ message until reach the fix drop factor. To overcome this problem, a new broadcasting method as Dynamic SNBR (DSNBR) is proposed, where the drop factor is determined based on current number of neighbor nodes. This method rebroadcast the extra RREQ messages based on the determined dynamic drop factor. The performance of the proposed DSNBR is evaluated using NS2 and compared with the performance of the existing protocol; AODV and SNBR. Simulation results show that the new routing protocol reduces the routing request overhead, energy consumption, MAC Collision and enhances end-to-end delay, network coverage ratio as a result of reducing the extra route request messages.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.6
• /
• pp.219-228
• /
• 2007

End-to-end path setup and maintenance are very important for mobile ad-hoc wireless communications, because of the mobility and the limited battery capacity of the nodes in the networks. the AODV routing protocol is the one of mary proposed protocols. However, there are route failure problem with the Proposed protocols between intermediate nodes due to such mobility and exhausted battery characteristics, and this is because only the shortest hop count is considered for the route setup. If route failure happens. Problem such as the waste of bandwidth and the increment of the energy consumption occur because of the discarding data packets in the intermediate nodes and the path re-setup process required by the source node. In addition, it obviously causes the network lifetime to be shortened. This paper proposes a routing protocol based on the AODV routing protocol that it makes use of the remaining energy, signal strength and SNR of the MAC layer resources to setup a path.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.216-219
• /
• 2012

In wireless ad-hoc networks, the nodes configuring a path act as routers with various mobility. If the path is broken by the movement of a node, a new path have to be found again. For this reason, the node with high mobility should be excluded from structuring a path as far as possible. In this paper, we propose an algorithm which excludes nodes with high mobility from constructing a path by collecting and managing the information of mobility. As the result, this can provide more stable paths. The proposed algorithm uses the extended AOMDV method. In this algorithm, we appends History Field and Decline Field in the routing table to collect and manage the mobility information. In addition, we add Mbl Field to RREP (Route Reply) message to apply the collected information to configure the real path.