• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.12
• /
• pp.918-923
• /
• 2018

The main function of a fuel tank is to store fuel. On the other hand, the structural soundness of the fuel tank is related directly to the survival of the crew in an emergency situation, such as an aircraft crash, and the relevant performance is demonstrated by a crash impact test. Because crash impact tests have a high risk of failure due to the high impact loads, various efforts have been made to minimize the possibility of trial and error in the actual test at the beginning of the design. Numerical analysis performed before the actual test is a part of such efforts. For the results of numerical analysis to be reflected in the design, however, the reliability of numerical analysis needs to be ensured. In this study, the results of numerical analysis and actual test data were compared to ensure the reliability of numerical analysis for the crash impact test of a rotorcraft fuel tank. For the numerical analysis of a crash impact test, LS-DYNA, crash analysis software, was used and the ALE (arbitrary Lagrangian Eulerian) technique was applied as the analysis method. To obtain actual test data, strain gages were installed on the metal fittings of the fuel tank and linked to the data acquisition equipment. The strain and stress of the fuel tank fitting were calculated by numerical analysis. The reliability of the numerical analysis was enhanced by assessing the error between the strain measurement of the upper fitting obtained from an actual fuel tank and the strain calculated from numerical analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.32 no.7
• /
• pp.591-595
• /
• 2015

The roller rig tester for safety performance evaluation of wheel derailment is a test facility which can give the test load condition to the test wheel, similar to the actual dynamic condition in actual running condition. This study describes the evaluation result on the durability of the resilient wheel equipped with the ring damper and the damping material, and installed in the half part of a full scaled bogie in combination with the primary spring when it rotates under the dynamic condition. The evaluation result on durability of resilient wheel after load test of 2 million cycles shows that the safety of wheel is not affected by the applied load in visual inspection and nondestructive test, however, in the bolt used for fastening the ring damper to the wheel the loosening was found. Accordingly the use of self-locking nut and washer is recommended.

• The Journal of Korean Medical History
• /
• v.34 no.1
• /
• pp.47-57
• /
• 2021

The appointment of medical officials during the Joseon Dynasty was conducted through medical testing. To date, most of the research done on these tests has focused on the testing system and its formal qualities without any study of actual test cases. This paper considers the significance of the medical examination format and contents through a test paper contained in the book "Joseonuihaksageupjilbyeongsa (朝鮮醫學史及疾病史)" by MikiSakae (三木榮). The literature confirms that the medical exam paper is the same format as "Gangji (講紙)," and that the test format called "Gangseo (講書)" is a very high-level test. Therefore, analysis of the case suggests that the format of the medical examination reflects the demand for high-quality medical learning for applicants. This consideration is meaningful because existing medical test papers are very rare.

• Journal of the Korean housing association
• /
• v.15 no.1
• /
• pp.175-183
• /
• 2004

The purpose of this study was to identify the actual condition of residential environment for the elderly residing in Daejeon. The data were collected through interviews and structured questionnaires. The sujects were 583 elderly people over the age of 65 in Daejeon. Sociodemographic characteristics, living characteristics, housing characteristics, neighborhood environment types, actual usage condition of neighborhood environment, relationship between sociodemographic characteristics and actual usage of neighborhood environment, actual condition of unit interior, were surveyed. The data were analyzed with frequency, percentage, χ²-test, mean using the SPSS package. The major findings were as follows. Features of unit interior which pointed generally were deterioration, soundproofing and size. Features of unit interior which need to be carefully planned were removal of height difference of entrance, removal of the thresholds, installation of emergency bell and room heating control facility. The facilities provided highly within the subject's residential environment were the eldery facility, church, hospital, bank, restaurant, beauty salon/barbershop, supermarket. and the facilities provided lowly were recreational facility, library, elderly school.

• Journal of Navigation and Port Research
• /
• v.29 no.7
• /
• pp.595-601
• /
• 2005

The IMO manoeuvrability standard was established for preventing sea accidents such as collisions and strandings due to the lack of manoeuvrability. The standard of ship manoeuvrability enforced by resolution MSC.l37(76) has been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standard is able to be divided into three kinds as followings; (1) Turning capability standard: Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standard : Estimated values in design stage are to be certified by 10 deg. and 20 deg. zig-zag tests of the actual vessel. (3) Shortest stopping distance standard : Estimated value in design stage is to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors verified the criteria of IMO manoeuvrability standard comparing them with the values resulted from sea trial tests of various kinds of actual vessels and examined separately the validity of all criteria of the standard.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.27-33
• /
• 2005

The IMO manoeuvrability standard was established for preventing sea accidents such as collisions and strandings due to the lack of manoeuvrability. The standard of ship manoeuvrability enforced by resolution MSC.137(76) has been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standard is able to be divided into three kinds as followings; (1) Turning capability standard: Estimated values in design stage are to be certified by turning cir치e test q the actual vessel (2) Course keeping quality standard: Estimated values in design stage are to be certified by 10 deg. and 20 deg. zig-zag tests of the actual vessel. (3) Shortest stopping distance standard: Estimated value in design stage is to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors verified the criteria of IMO manoeuvrability standard comparing them with the values resulted from sea trial tests of various kinds q actual vessels and examined separately the validity of all criteria of the standard.

• Journal of the Korean Society of Safety
• /
• v.31 no.1
• /
• pp.19-24
• /
• 2016

Rubber parts are widely used in many applications such as dampers, shock absorbers, and seals used in railway and automotive industries. Much research has thus far been conducted on property estimation and life prediction of rubber parts. To predict the service life of rubber parts at room temperature, most prior work adopts the well-known Arrhenius model that needs the accelerated life test in high-temperature conditions. However, they may not reflect the actual conditions of use that rubber parts are usually used under a specific strain condition during long period of time. In this context, we propose a method for the life prediction of rubber parts in actual conditions of use. The proposed method is based on the accelerated life test using stress relaxation during which three relatively high elongation percentages (100%, 200%, and 300%) are applied to the rubber specimens. Rubber specimens were prepared in accordance with KS M 6518 standard and three stress relaxation testers were fabricated for actual experiments. Finally, a inverse power model for life prediction was derived from experimental results. The predicted life was compared with the actual test life for validation.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.1
• /
• pp.16-24
• /
• 2005

Objectives : To help develop strategies to cope with the changes arising from the rapid aging process by predicting the determining factors of intention to actual use of the charged long-term care services for elderly as perceived by the middle aged who play the major role of supports. Methods : Subjects were the parents (men 177, women 507) in their 40s of the students selected from a university of Busan city. A questionnaire survey was conducted for 4 weeks in October 2003 about the knowledge for long-term care service, the intention of actual use, and the preferences about the type of service suppliers. Data analysis was performed with frequency, chi-square test, and t-test using SPSS program (ver 10.0K), along with data mining using decision tree of Enterprise Miner V8.2 by SAS. Results : About half of the subjects (53.7%) had the actual experiences of elderly supports. Intentions to use the charged services were relatively high in home visiting nursing care service (40.1%) and long-term care facilities service (40.4%), and were influenced by previous knowledge about the services. The intentions were stronger in women, those with higher education, and those with greater income levels. Actual elderly supports were mostly (80%) done by women, and the perceived burdens for the supports were bigger in women and those of lower socioeconomic level. Desired charges were about 10,000 won for the bath service, 20,000 won for the rests services per day, and about 500,000 won for the long-term care facilities service per month. From the result of decision tree analysis, the job professionalism was the most important determining factor of intention to actual use of the services with validation as $63{\sim}71%$. Health and welfare mixed type facilities were preferred, and the most important consideration was the level of professionalism. Conclusions : Intention to actual use of the charged services was largely determined by the aspects of time and cost. Polices to increase the number of service suppliers and to decrease the burdens perceived by actual supporters were strongly recommended.

• Journal of Energy Engineering
• /
• v.25 no.3
• /
• pp.73-82
• /
• 2016

The energy consumption efficiency in a variety of operational test mode was considered for domestic gas boiler below 70 kW. The energy efficiency test carried out in the experimental conditions similar to the actual operation status was analyzed and compared with the current Korean efficiency test method. Four types of test modes for each boiler(Non-condensing and condensing boiler) were carried out in the condition of laboratory mode(full load, steady state) and actual operating mode. Futhermore divided into two operational status for each of these, it was applied by maximum gas consumption and consumer sales conditions. Test equipment has the function referred to gas boiler standards, such as KS or European standard EN. The equipment should be continuously measured and record the measuring factors which are the flow volume of gas and water, laboratory temperature, water flow volume for heating, return water volume after heating and quantity of the exhaust gases(CO, NO, $NO_2$). The experimental results were found that non-condensing boiler efficiency of laboratory mode is about 10% higher than that of actual mode. In case of condensing boiler, the efficiency of laboratory condition is about 20% higher than that of the actual using conditions. I suggest that the government will gradually take the efficiency test method considering the actual conditions.

• Journal of Korean Society of Water and Wastewater
• /
• v.28 no.2
• /
• pp.225-233
• /
• 2014

This paper presents a Computational Fluid Dynamics(CFD) based simulation and experimental tracer test of flow pattern and turbulent energy dissipation inside a serpentine flocculation basin with continuous operation. Research focused on the evaluation of a specific flow pattern on the hydraulic behavior on the flocculation basin. From the results of CFD simulation and actual tracer test, both results were in good accordance with each other. Also, each Morill index were calculated as 1.5 from CFD simulation and 1.7 from actual tracer test, respectively. Especially, turbulence energy was dissipated relatively higher in the vicinity of inlet to the flocculation basin than other region. The differences between the CFD simulation and actual tracer test were 1.4 min in $T_{50}$, and 1.3 min in $T_p$, respectively.