• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.24-27
• /
• 2001

Nowadays, increasing demand of the customized products has led to an increased usage of rapid prototyping in the product development. However, the acquisition price of a rapid prototyping equipment is still too high that not every body can afford to buy one. To offer a wide access to the users who need physical prototypes, a connection of the rapid prototyping equipment to the Internet is a viable step. It would allow a large group of customers all over the world to use the manufacturing capability of a service provider offering this kind of manufacturing service. To realize how such an e-manufacturing concept can look like, a LOM-type 3D printer developed at KIST has been used as test site and connected to the Internet. A possible user can log on to the server of the equipment and view his STL file and start the building operation from a remote place. To see whether the operation runs properly, a CCD camera is used to transmit the actual state of operation online. The result so far proves the feasibility of rapid prototyping on the Internet as well as an order-adaptive manufacturing system via web.

• Journal of Advanced Marine Engineering and Technology
• /
• v.31 no.2
• /
• pp.138-144
• /
• 2007

The variation of the crankshaft speed in a multi-cylinder engine is determined by the resultant gas pressure torque and the torsional deformation of the crankshaft. Under steady state operation, the crankshaft speed has a quasi-periodic variation. For the diagnosis the engine instantaneous speed versus crankshaft angle is utilized. This paper describes a simple measurement method of the engine instantaneous speed versus crankshaft angle using the teeth on the flywheel of the crankshaft. Two non-contacting magnetic pickup combinations detect the crank angle and TDC position for the data acquisition. The results from experiments on a 6 cylinder marine diesel engine demonstrate that the crankshaft speed variation are detected with good resolution. And the crankshaft speed variation is investigated according to the operation conditions. Also, it is confirmed that the engine output measured by EMS can be evaluated larger than the actual value due to TDC position error caused by instantaneous speed variation.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.6
• /
• pp.474-483
• /
• 2003

In this study, the dynamic characteristics of a catenary system and pantograph supplying electrical power to high-speed trains are investigated. One of the most important issues accompanied by increasing the speed of high-speed rail is stabilization of current collection. To stabilize current collection, it is necessary the contact force between the catenary and the pantograph to be kept continuous without loss of contact. The analytical model of a catenary and a pantograph is constructed to simulate the behavior of an actual system. The analysis of the catenary based on the Finite Element Method (FEM) is performed to develop a catenary model suitable for high speed operation. The reliability of the models is verified by the comparison of the excitation test with Fast Fourier Transform (FFT) data of the actual system. The static deflection of the catenary, stiffness variation in contact lines, dynamic response of the catenary undergoing constant moving load, contact force, and each state of the pantograph model were calculated. It is confirmed that a catenary and pantograph model are necessary for studying the dynamic behavior of the pantograph system.

• Journal of the Korean Society of Industry Convergence
• /
• v.8 no.1
• /
• pp.11-17
• /
• 2005

This study was performed to analysis the operation process when fabric pattern design was done by the use of CAD system compared with the manual work in order to determine the operation efficiency with the application of fabric design CAD system. The results of the study were as follows: 1. since 160,000 colors were supported by CAD system, color proposed by consumer was able to match exactly according to the its design. However, exact color matching was not possible by manual work. 2. Woven state of back of pattern design could be identified simultaneously with face of it for CAD system, while face and back of the fabrics should be designed separatedly in case of manual work. 3. Since the combination of warp and filling yarn was compatible with the fabric density in one repeat unit in CAD system, exact size of pattern design to be woven was able to expressed. 4. Only simple graphical expression by manual work was seen, while with the CAD system, texture and shade effect as well as graphical expression could be expressed and so fault could be reduced in advance with the simulation of actual feeling of fabrics in the screen. In conclusion, when CAD system will be introduced to the textile industry, operation time of designing pattern can be reduced. Since the operation is easy and simple, a beginner can operate CAD system easily. Thus, production and wage costs can be saved and this can be related directly with the improvement of productivity which is the main purpose of introducing CAD system.

• Journal of Korean Library and Information Science Society
• /
• v.53 no.1
• /
• pp.31-54
• /
• 2022

The purpose of this study was to examine the actual state of the curriculum on how qualification training is organized and operated based on the operation case of the K University Education and Training Institute, which operated librarian teacher (level 1) qualification training was held during the summer vacation of 2021. As a result of the study, a total of 111 librarians participated in the actual qualification training, of which 50 librarian teachers (4 males, 46 females) were from elementary schools, 24 (4 males, 20 females) from middle schools, and 37 (5 males, 32 females) from high schools. In addition, the curriculum for qualification training consisted of core competencies and subjects that met the scope of the job of the 'learner strength development' and the 'librarian role statement', and the satisfaction ratio of the 111 librarian teachers who participated in the qualification training averaged 4.76 out of 5. Overall, the satisfaction was high, but it was suggested on the areas that were either the lowest or lower than average.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.2
• /
• pp.209-220
• /
• 1997

DBS offers actual services to mass-media and communication system of very broad region in information society. Especially, the DBS is the only system to access TV broadcasting service on a sailing ship. But the ship's DBS receiver is required a complex antenna tracking system because ships are under complex moving such as pitch, roll, and yaw etc. This study is motivated to develop a tracking antenna system to receive the koreasat on small silo ship. Therefore, this system is researched to small size, light weight, simple operation, and low cost of the product. The mount structure have been a compact size and easy operation to the Az/El 2-axis type which is operated by step motor. And it is very useful on a ship in the around sea of korean peninsula. The antenna has a plate type of micro-strip array, and is a domestic production. The vibration sensor is selected to gyro sensor of ultra-sonic rate type for ship's moving control. Tracking method is used the step-tracking algorithm, and the ship's moving compensation is adapted to the closed loop control method by ship's moving detection of gyro sensor. Tracking test is operated by the ship's moving simulator, we examined the actual receiving state on sailing shipboard in the near sea of korean peninsular.

• Journal of Power Electronics
• /
• v.3 no.4
• /
• pp.249-258
• /
• 2003

This paper presents a high-efficient and cost effective three-phase AC/DC-DC/AC power conversion system with a single two-switch type active Auxiliary Resonant DC Link (ARDCL) snubber circuit, which can minimize the total power dissipation. The active ARDCL snubber circuit is proposed in this paper and its unique features are described. Its operation principle in steady-state is discussed for the three phase AC/DC-DC/AC converter, which is composed of PWM rectifier as power factor correction (PFC) converter, sinewave PWM inverter. In the presented power converter system not only three-phase AC/DC PWM rectifier but also three-phase DC/AC inverter can achieve the stable ZVS commutation for all the power semiconductor devices. It is proved that the proposed three-phase AC/DC-DC/AC converter system is more effective and acceptable than the previous from the cost viewpoint and high efficient consideration. In addition, the proposed two-switch type active auxiliary ARDCL snubber circuit can reduce the peak value of the resonant inductor injection current in order to maximize total system actual efficiency by using the improved DSP based control scheme. Moreover the proposed active auxiliary two-switch ARDCL snubber circuit has the merit so that there is no need to use any sensing devices to detect the voltage and current in the ARDCL sunbber circuit for realizing soft-switching operation. This three-phase AC/DC-DC/AC converter system developed for UPS can achieve the 1.8% higher efficiency and 20dB lower conduction noise than those of the conventional three-phase hard-switching PWM AC/DC-DC/AC converter system. It is proved that actual efficiency of the proposed three-phase AC/DC-DC/AC converter system operating under a condition of soft switching is 88.7% under 10kw output power.

• Fire Science and Engineering
• /
• v.26 no.5
• /
• pp.54-60
• /
• 2012

This study is the analysis of the actual state of hospital-based training in level 1 emergency medical technicians (EMTs) in fire station. The survey was carried out to 42 fire fighters having level 1 emergency medical technician certification from May 11 to 12 in 2012. The results showed 56.5 %, that the level 1 EMTs of roles had direct experienced. Level 1 EMTs performance frequency of clinical practice that endotracheal intubation 66.9 %, laryngeal mask airway 8.4 %, intravenous access 76.6 %, nitroglycerin sublingual 61.2 %, bronchodilator inhalation 50.0 %, fluid loading 73.8 %, ventilator apply 57.6 %, dextrose injection 57.6 %. It is necessary to investigate the continuous study on the education among the level 1 EMTs and the continuous evaluation and analysis of problems, supplemented of guidebook, practical education programs and regulation upon the operation and management of a hospital-based skill training.

• Journal of Power Electronics
• /
• v.16 no.2
• /
• pp.685-694
• /
• 2016

This paper presents a reliability assessment model for the power semiconductors used in wind turbine power converters. In this study, the thermal loadings at different timescales of wind speed are considered. First, in order to address the influence of long-term thermal cycling caused by variations in wind speed, the power converter operation state is partitioned into different phases in terms of average wind speed and wind turbulence. Therefore, the contributions can be considered separately. Then, in regards to the reliability assessment caused by short-term thermal cycling, the wind profile is converted to a wind speed distribution, and the contribution of different wind speeds to the final failure rate is accumulated. Finally, the reliability of an actual power converter semiconductor for a 2.5 MW wind turbine is assessed, and the failure rates induced by different timescale thermal behavior patterns are compared. The effects of various parameters such as cut-in, rated, cut-out wind speed on the failure rate of power devices are also analyzed based on the proposed model.

• Journal of the Korean Society for Library and Information Science
• /
• v.44 no.1
• /
• pp.137-155
• /
• 2010

This study was conducted to propose the improvements by analyzing the actual state of Education Information Disclosure related to the school libraries of elementary and middle schools and by grasping its problems. In order to do that, we examined the Education Information Disclosure standards in school libraries in Korea. The actual state of information disclosure on 13 items related to school libraries was analyzed, using S High School in Seoul as a case study. In addition, in understanding the values of school libraries easily and informing them exactly through Education Information Disclosure, it was judged that the forms and guides for disclosure and the level of school introduction services were somewhat insufficient. On the basis of that, some improvements were proposed, which could help to make the operation and management of Education Information Disclosure in school libraries more efficient.