• Journal of Technologic Dentistry
• /
• v.13 no.1
• /
• pp.79-97
• /
• 1991

To improve the management of dental laboratory through the research on the actual condition, this study posed questions on 36 dental laboratories. The results are as follows : 1. The establishment of dental laboratory in Chunbuk was increased between in 1980 and 1986. Especially it has been more increased since 1989. According to the proportion of population the number of the dental laboratories in Chunbuk was much more than that of other provinces and took the first place in september 1990. 2. The ratio between the unlicensed dental technician and the licensed was 24.83% and 67.11% each . The former must be replaced by the licensed. And the latter ought to try to improve their culture and technique. 3. Overtime payment must be paid for those who work above eight hours. 4. It takes 5 days at a minimum for the production of dental prosthesis with both stability and esthetics. 5. Every Saturday afternoon, Sunday and national holiday must be free. 6. Bonus must be paid 600% a year at a minimum. The system of retirement allowance should be active. All dental technicians ought to be affliated with their labor union and medica insurance. 7. Such dental restoration as porcelain and crown and bridge prosthesis must by increased to a degree between 30% and 50% at a minimum and the reduction system of charge for a dental technique has to be abolished. 8. The general working conditions of dental laboratory, especially pay and working hour must be improved. 9. To advance the service improvement of dental treatment and the banishment of illegal one, the medical insurance of crown and bridge prosthesis must be generally practised. 10. Ill case of the staff cull:lloyulent of dental laboratory, minimem wage system must be observed. 11. Directing dentist system on the ertablisment of dental laboratory must be abelished or wholly improved.

• Korean journal of food and cookery science
• /
• v.26 no.5
• /
• pp.665-675
• /
• 2010

This study applied high-pressure extraction cooking, which has been proven superior in processibility and stock extraction, for the preparation of stock, which is widely used as a basic material of dishes, and examined the physicochemical and sensory properties of the extracted stock by adding salt. We observed changes in the chromaticity of brown stock according to salt content, and pH decreased with increased the salt content, suggesting that stock was acidified. Regarding the mineral content, Na was the highest, followed by K and P. Regarding total free amino acid content, the content of essential amino acids, enhancing free amino acids, and other amino acids also showed the highest level in S2, which contented 0.3% salt. In the sensory test, saltiness grew stronger with an increase in salt content, and overall palatability was highest in S2. Regarding ranking, preference was highest for S2. Utilize to data that study finding of above is actual in development for mass production of brown stock product licensed cooks' traditional mesh dipper technology quality that make mass production direction that change and normalizes product that can keep excellent taste and improve conservative property develop. Culture formation and our country foodservice industry development that reduce damage of informed people ashes through development of brown stock product that is changed in large quantity, and improve quality of food more positively contributing to reappear diversification of menu, systematization and taste of specialty store as well as can contribute in rationalization of informed people ashes purchase, personnel expense (labor power) curtailment, waste decrease etc. but is developed still more being utilized.

• International Journal of Quality Innovation
• /
• v.6 no.1
• /
• pp.58-73
• /
• 2005

The objective of this study is to evaluate the equipment risk before and after SEMI S2-93A implementation, thus providing a guideline for safety improvement. Semiconductor Plant A located in Taiwan's Hsinchu Science Based Industrial Park with 147 manufacturing machines was used for risk assessment. This study was carried out in three steps. First, a preliminary hazard analysis was conducted. A detailed process safety evaluation was conducted (Hazard and Operability Study, HAZOP); and finally, the equipment risk comparison before and after Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation. The preliminary hazard analysis results showed high risk in 21.77% of the manufacturing machines under risk assessment at Plant A. The largest percentage existed in the Diffusion Department. The machine types specified by the hazardous work site review and inspection according to Article 26 of Labor Inspection Regulation (the machines that use such chemicals as, $SiH_4$, HF, HCL, etc. and that are determined to be highly hazardous through preliminary hazard analysis) were added to the detailed process analysis and evaluation. In the third part of this evaluation, the machines at Plant A used for detailed process safety assessment were divided into two groups based on the manufacturing data before and after 1993. The severity, possibility, and actual accident analysis before and after SEMI S2-93A implementation were compared. The Semiconductor Equipment Manufacturing Instruction (SEMI S2-93A) implementation can reduce the severity and possibility of hazard occurrence.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.450-455
• /
• 2002

Construction market situation has been changed quickly in the 21st century. One is a large variety of information, the other is the development of IT technology among the rest of the change. Accordingly, it is very important that information is managed systematically and made good use of broadly in proportion to the increase of information volume. Therefore, the purpose of this study is to propose a applicable classification system in the construction phase. First of all, the Construction Information Classification proposed by the government is studied to apply the actual work and to build a applicable construction information classification for construction project. A base of the applicable classification system is the Construction Information Classification, SMM and Materials classification(Public Procurement Service). The applicable classification system to control and manage the construction information is consist of the 4 types : Facility classification, Element classification, Work classification, Resource classification (Materials, Equipment, Labor).

• Industrial Engineering and Management Systems
• /
• v.13 no.1
• /
• pp.52-66
• /
• 2014

Promotion of a closed-loop supply chain requires disassembly systems that recycle end-of-life (EOL) assembled products. To operate the recycling disassembly system, parts selection is environmentally and economically carried out with non-destructive or destructive disassembly, and the recycling rate of the whole EOL product is determined. As the number of disassembled parts increases, the recycling rate basically increases. However, the labor cost also increases and brings lower profit, which is the difference between the recovered material prices and the disassembly costs. On the other hand, since the precedence relationships among disassembly tasks of the product also change with the parts selections, it is also required to optimize allocation of the tasks in designing a disassembly line. In addition, because information is required for such a design, the recycling rate, profit of each part and disassembly task times take precedence among the disassembly tasks. However, it is difficult to obtain that information in advance before collecting the actual EOL product. This study proposes and analyzes an optimal disassembly system design using integer programming with the environmental and economic parts selection (Igarashi et al., 2013), which harmonizes the recycling rate and profit using recyclability evaluation method (REM) developed by Hitachi, Ltd. The first stage involves optimization of environmental and economic parts selection with integer programming with ${\varepsilon}$ constraint, and the second stage involves optimization of the line balancing with integer programming in terms of minimizing the number of stations. The first and second stages are generally and mathematically formulized, and the relationships between them are analyzed in the cases of cell phones, computers and cleaners.

• The Journal of the Korea Contents Association
• /
• v.8 no.7
• /
• pp.243-251
• /
• 2008

The purpose of this study is to give some suggestions by examining what kind of effects the cynicism about the organizational change of the administrative staff in private colleges have on their job involvement and organizational commitment and by analyzing the difference between the colleges having experienced labor-management disputes and those without such experiences. The results of this study obtained by actual analyses and the suggestions provided based on the results are as follows. In the colleges having experienced disputes on campus, the cynicism about the organizational change reduces the job involvement and the organizational commitment of the members of the organizations. On the other hand, there are no significant effects of the cynicism about the organizational change on the job involvement and the organizational commitment of the members in the case of the colleges not having experienced disputes on campus.

• Journal of the Korean Society of Safety
• /
• v.32 no.4
• /
• pp.59-65
• /
• 2017

This study examined the stakeholder cognition of the safety certification marking system by surveying manufacturers, lessors, and users. In addition, among various issues about safety certification marking systems, the improvement of safety certification marking contents was suggested in order to guarantee quality of temporary equipments. The results by statistical method show that it is necessary to increase of users' understanding about the safety certification marking system. In addition, the quality management system of temporary equipments should be introduced to control the actual condition that temporary equipments of various product companies are mixed in a site during removal and reuse processes. For detailed marking contents, it is recommended that a certification mark, an identification number, and the production year should be displayed and the manufacturer name could be selectively presented. Detail informations such as a safety certification number, a product company, a model type or name, a specification, a weight, a product number, and the location of a certification mark should be identified by the identification number.

• The Journal of the Korea Contents Association
• /
• v.20 no.10
• /
• pp.167-176
• /
• 2020

The automated fish feed system currently used in Korea supplies a certain amounts of feed to water tanks at a certain time. This automated system can reduce the labor cost of managing aqua farms, but it is very difficult to control intelligently and appropriately the amount of expensive feed that is critical to aqua farm productivity. In this paper, we propose the FIIFF Inference Model( Fuzzy Inference-based Intelligent Fish Feeding Model) that can solves the problems of these existing automatic fish feeding devices and maximizes the efficiency of feed supply while properly maintaining the growth rate of fish in aqua farms. The proposed FIIFF inference model has the advantage of being able to control feed amounts appropriately since it computes the amount of feed using the current water environments and fish activity state of the aqua farms. The result of the feed amount yield experiment with the proposed FIIFF Inference Model represents the effect of saving 14.8% over the eight months of actual feed amount in the aqua farm.

• The Journal of the Korea Contents Association
• /
• v.15 no.4
• /
• pp.188-196
• /
• 2015

Areas of forensic have been used as a tool in many fields of police investigation, detective, such as research relating to the criminal investigation. Despite it is failure to obtain a central role and status, forensic is nonetheless necessary. This study recognizes the importance of police and forensic activities, and in reviewing the level of support for actual condition of science and forensic investigations, and it has tried to find the problems. Based on this, this study discusses development plans of the working system to explore whether it can improve the efficiencies of forensic activities from the realistic restrictions. These days, one of the main problems that police forensic activities encounter is lack of labor and human resources on the arrested. Therefore, this study aimed to looking for realistic ways to improve efficiencies of forensic agents First, changing the working system and the restructuring the command system requires a long-term perspective. In other words, a regional forensic system is required. Second, the establishment of a Police Investagation Specialization to ensure the professionalism of the investigation is necessary. Third, the system should improve forensic specialties. Fourth, the R&D organization should established to improve the capability for forensic investigations.

• The Korean Journal of Applied Statistics
• /
• v.27 no.3
• /
• pp.387-396
• /
• 2014

The GDP gap (also called the output gap) is the difference between potential GDP and actual GDP. Potential GDP is the maximum sustainable output that is achieved when the resources (labor and capital) are used to capacity. Central banks pursuing price and employment stability consider the output gap as an informative variable for monetary policy since the output gap could be regarded as a proxy of demand-supply imbalances. In this paper, the GDP gap of Korea is decomposed following the filtering method in the previous research, and major factors that affect the variation of GDP gap are investigated based on the decomposed series. The analysis results by the Super Smoother algorithm used in Fox et al. (2003)and Fox and Zurlinden (2006) are found consistent with theory. Much of the variation of nominal GDP gap is explained by Total Factor Productivity(TFP) gap, which is the change of productivity due to recent technological innovation and environmental change. It is also found that variation of terms of trade significantly affects the GDP gap of Korea due to its high dependency on international trade; however, the effect of the domestic price is not negligible like other countries.