• 제목/요약/키워드: Active zone

검색결과 448건 처리시간 0.024초

경주 활성단층대 및 주변 국가지하수 관측정에서 지진과 수위변동 상관관계 연구 (Relationship between Earthquake and Fluctuation of Water Level in Active Fault Zone and National Groundwater Monitoring Wells of Gyeongju Area)

  • 장현우;정찬호;이용천;이유진;홍진우;김천환;김영석;강태섭
    • 지질공학
    • /
    • 제30권4호
    • /
    • pp.617-634
    • /
    • 2020
  • 본 연구의 목적은 경주 단구리 활성단층대에 설치된 지하수 관측정과 주변 국가지하수관측정 124개 공에서 지진발생에 따른 지하수위 변동특성을 알아보는 데 있다. 수위자료를 활용하여 시공간적 분포특성과 지진과의 상관성을 해석하였으며, 발생한 지진에 대하여 관측정의 반응에 대한 효율성(잠재성)을 나타내는 Earthquake effectiveness(ε)와 q-factor를 계산하여 유효성을 분석하였다. 관측기간 중 단구리 관측정의 지하수위 변동은 E1(2019년 4월 22일 M 3.8) 지진 발생 이후(post-seismic) 83 cm의 지하수위 하강을, E2(2019년 6월 11일 M 2.5) 지진발생 전(pre-seismic) 76 cm의 지하수위 상승을 보여주었다. 주변 국가지하수관측정의 수위자료를 이용하여 시간에 따른 공간분포 분석결과, 단층대 주변 관측정에서 수위변동이 상대적으로 높은 특성을 보인다. 그리고 충적지하수보다 암반지하수에서 더 큰 수위변동을 보여 암반 지하수가 지진 관측에 유리함을 보여준다. 이러한 수위의 상승과 하강은 지진에 의해 암반에 가해지는 인장응력에 의한 균열의 증가와 압축응력에 의한 공극의 감소와 관련된 것으로 보인다. 단구리 관측정의 Earthquake effectiveness(ε)와 q-factor의 유효범위는 각각 2.70E-10~5.60E-10, 14.4~18.0으로 산정되었다.

차량 종류 및 운전자 인지반응 시간을 이용한 LDWS 경고 특성에 관한 연구 (A Study on the Warning Characteristics of LDWS using Driver's Reaction Time and Vehicle Type)

  • 박환서;장경진;유송민
    • 자동차안전학회지
    • /
    • 제8권1호
    • /
    • pp.13-18
    • /
    • 2016
  • More than 80 percent of traffic accidents related with lane departure believed to be the result of crossing the lane due to either negligence or drowsiness of the driver. Lane-departure related accident in the highway usually involve high fatality. Even though LDWS is believed to prevent accident 25% and reduce fatalities by 15% respectively, its effectiveness in performance is yet to be confirmed in many aspects. In this study, the vehicle lateral locations relative to warning zone envelop (earliest and latest warning zone) defined in ISO standard, ECE and NHTSA regulations are compared with respect to various factors including delays, vehicle speed and vehicle heading angle with respect to the lane. Since LDWS is designed to be activated at the speed over 60 km/h, vehicle speed range for the study is set to be from 60 to 100 km/h. The vehicle heading angle (yaw angle) is set to be up to 5 degree away from the lane (abrupt lane change) considering standard for lane change test using double lane-change test specification. The TLC is calculated using factors like vehicle speed, yaw angle and reaction time. In addition, the effect of vehicle type and reaction time have been considered to assess LDWS safety.

동물플랑크톤에 의한 후방산란강도 및 체적복반사음의 예측 (Prediction of Backscattering Strength and Volume)

  • 나정열
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 1992년도 학술논문발표회 논문집 제11권 1호
    • /
    • pp.127-130
    • /
    • 1992
  • 한국 근해에서 능동소나 (active sonar) 사용시 사용되는 environmental parameters 가운데 하나인 volume reverberation(REv)을 산출하기 위하여 플랑크톤에 의한 후방산란 강도(backscattering strength)에 대한 연구를 하였다. 이를 위하여 수산진흥원 자료(80-89년)중 부유생물조사표에서 후방산란 강도가 다른 종에 비하여 큰 copepoda의 개체수를 평균한 후, 수심별 개체수를 계산하여 수심별, 주파수별(10, 50kHz), 계절별(2월, 8월) 후방산란 강도와 multipath eigenray model을 이용하여 REv를 산출하였다. 예로 사용한 동남해역(zone:S3), 서해중부해역(zone:W3)에서 주파수별 REv는 일반적인 형태인 포기에는 고주파가 높고, 1.5초 이후에는 저주파가 높게 나타났다. 그러나 여름이 겨울보다 플랑크톤 개체수가 많아 후방산란 강도가 크지만(2-5dB), REv는 겨울이 더 크게 나타났다. 이러한 이유는 SVP profile에 의한 pressure 계산결과, 여름에는 ray가 down-ward이고 겨울에는 duct를 형성하여 ray가 거의 direct로 진행하므로 transmission loss가 여름이 크기 때문이다. 또한 ray tracing결과 여름철에는 ray crossing이 많아 겨울에 비하여 fluctuation이 심하게 나타나는 현상을 보이고 있다. 두 지역 이외에도 한국근해의 정확한 REv을 예측하기 위해서는 플랑크톤의 정확한 측정과, 이론적인 수치와 비교할 수 있는 실측치를 얻는 것이 필요하다고 볼 수 있다.

  • PDF

광스캔닝 훌로그래피의 해상도 (Resolution in Optical Scanning Holography)

  • 도규봉
    • 한국항행학회논문지
    • /
    • 제2권2호
    • /
    • pp.126-131
    • /
    • 1998
  • 광학적 스캐닝 홀로그래피에 있어서, 물체의 3차원 홀로그래픽 정보는 2차원적 광스캐닝에 의해서 생성되며, 광스캐닝 광선은 time-dependent한 Gaussian 형태의 Fresnel 윤대판(zone plate)이다. 본 기술에서 홀로그래픽 정보는 그 자체로서 전기적인 신호로서 발생하기 때문에 전자광선 addressed - spatial light modulator을 사용하여 영상 재생이 가능하다. 이 기법의 응용분야로서 3-차원 원거리 광 센서로서 사용될 수 있으며, 특히 비행물체 확인에 응용될 수 있다. 본 논문에서, 우리는 먼저 광스캐닝 홀로그래피에 대해 간략한 기술과 본 기술 시스템에 있어서 광스캐닝 빔의 해상도를 먼저 유도하고, 그 다음으로 Gaussian 원리를 이용하여 홀로그래픽 image 재생을 위해 필요한 실상(real image) 및 허상(virtual image)에 대한 수학적 표현을 제시하고자 한다.

  • PDF

극대면적 UV-NIL 공정에서의 균일 가압 시스템 개발 (The Development of Uniform Pressurizing System for Extremely Large Area UV-NIL)

  • 최원호;신윤혁;여민구;임홍재;신동훈;장시열;정재일;이기성;임시형
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.1917-1921
    • /
    • 2008
  • Ultraviolet-nanoimprint lithography (UV-NIL) is promising technology for cost effectively defining micro/nano scale structure at room temperature and low pressure. In addition, this technology is fascinating because of it's possibility for high-throughput patterning without complex processes. However, to acquire good micro/nano patterns using this technology, there are some challenges such as uniformity and fidelity of patterns, etc. In this paper, we have focused on uniform contact mechanism and performed contact mechanics analysis. The dimension of the flexible sheet to get adequate uniform contact area has been obtained from contact mechanics simulation. Based on this analysis, we have made a uniform pressurizing device and confirmed its uniform pressurized zone using a pressure sensing paper.

  • PDF

Isolation of Rhizobacteria in Jeju Island Showing Anti-Fungal Effect against Fungal Plant Pathogens

  • Lee, Chung-Sun;Kim, Ki-Deok;Hyun, Jae-Wook;Jeun, Yong-Chull
    • Mycobiology
    • /
    • 제31권4호
    • /
    • pp.251-254
    • /
    • 2003
  • To select active bacterial strains to control plant diseases, 57 bacterial strains were isolated from the rhizosphere of the plants growing in various areas such as coast, middle and top of Halla Mountain in Jeju Island. Anti-fungal effect of isolated bactrial strains was tested in vitro by incubating in potato dextrose agar with isolates of four fungal plant pathogens Rhizoctonia solani, Fusarium oxysporum, Colletotrichum gloeosporioides and C. orbiculare, respectively. Thirty-four bacterial strains inhibited the hyphal growth of the plant pathogens, from which 17 strains inhibited one of the tested fungi, 10 strains two fungi, six strains three and a strain TRL2-3 inhibited all of the tested fungi. Some bacterial strains could inhibit weakly the hyphal growth of the plant pathogens, whereas some did very strongly with apparent inhibition zone between the plant pathogens and bacterial strains indicating the unfavorable condition for hyphal growth. Although there was no apparent inhibition zone, some bacterial strains showed a strong suppression of hyphal growth of plant pathogens. Especially, the inhibition by TRL2-3 was remarkably strong in all cases of the tested plant pathogens in this study that could be a possible candidate for biological control of various plant diseases.

북동태평양지역의 방산충 생층서 및 고해양환경 연구 (Radiolarian Biostratigraphy and Paleoceanographic Study from the Northeast Equatorial Pacific)

  • 김기현;박정희
    • Ocean and Polar Research
    • /
    • 제21권2호
    • /
    • pp.127-136
    • /
    • 1999
  • Radiolarian assemblages from KODOS area were analyzed in order to understand the biostratigraphy and paleoceanography of deep-sea sediment from the Northeast Equatorial Pacific. The sediment core was divided into two or three units on the basis of the chemical and physical properties. In the upper sediment, mixtures of Quaternary and Tertiary radiolarians are found indicating active reworking processes. Dissolution of radiolarians seem to increase with depth. Radiolarians are seldom in Unit III presumably due to dissolution and corrosion. The middle part of unit I appears to correspond to Collosphaera invaginata Zone (0.21 Ma). Unit II belongs to Collosphaera tuberosa Zone. Based on the absence of Stylatractus universus, we estimate its age to be younger than 0.42 Ma. Based on our analyses of radiolarians in Unit I and II, we estimated the age of unit III as Tertiary, particularly from Oligocene to Miocene. There may to be hiatuses of more than 3 My from late Miocene to Pliocene, which probably resulted from erosion and dissolution by the Antarctic Bottom Water Sedimentation rates during Quaternary range from 0.15 to 0.50 mm/ky with significant variabilities among stations. Radiolarians in the study area were mostly warm-water species.

  • PDF

원통형 보염기 후류에 형성되는 확산화염의 연소특성에 관한 연구 (A Study on the Combustion Characteristics of Diffusion Flame Formed in the Wake of Cylindrical Bluff Body)

  • 안진근;임덕재;노태선;송규근
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
    • /
    • pp.23-30
    • /
    • 1998
  • The stabilization characteristics of diffusion flame formed in the wake of a cylindrical flame holder were investigated. Distribution of turbulence intensity, concentration distribution of combustion gas, and ion currents were measured. The turbulence intensity in the wake of cylindrical- game holder is increased with increase of diameter or blockage ratio of grid. If the auxiliary fuel is injected into recirculation zone, the concentration of $C_3H_8$ is high, but the concentration of $CO_2$ is low at the boundary of recirculation zone. The region with highest average value of ion currents in the middle of flame is moved to the upstream side by the turbulent components of main stream. The flame mass with partially active reaction is moved fast for uniform flow and turbulence generator G3, but the flame mass with relatively slow reaction is moved slowly for turbulence generator G1.

  • PDF

In-vitro Antimicrobial Activity Phytochemical and Cytotoxicity of Methanolic Fruits Extract of Capsicum frutescent

  • Elbashir, Habiballah A.;Mubarak, Elnaeim E.;Kabbashi, Ahmed S.;Garbi, Mohamed I.;Elshikh, Ahmed A.
    • 식품보건융합연구
    • /
    • 제4권4호
    • /
    • pp.10-17
    • /
    • 2018
  • Capsicum frutescen is known in Sudan, is one of the most commonly used pepper species in cooking and in Sudanese folk medicine. The present study was conducted to investigate antimicrobial (bacteria and fungi) and cytotoxicity (Brine Shrimp Lethality Test) of methanolic extract of Capsicum frutescen (fruits). The extract have been tested in the present study to investigate the in vitro potential effects against Gram positive, Gram negative bacteria and fungi. The selected organisms were Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa, Klebsiella pneumonia and Candida albicans using the cup plate agar diffusion method. The methanol extract of Capsicum frutescen (fruits) exhibited inhibitory effects against Escherichia coli with zone of inhibition (23 mm) and Klebsiella pneumonia with zone of inhibition (17 mm). The phytochemical screening revealed the presence of Tannins, Saponin, Alkaloids, Anthroquinoles and Terpenoids. The Cytotoxicity of methanolic extract of Capsicum frutescens was $LD_{50}$ $64.68{\mu}g/ml$. The activity and presence of compounds known to be biologically active are a validation for the use of Capsicum as a food ingredient and as a therapeutic element of traditional medicine.

Corrosion Characteristics of Welding Zones by Laser and TIG Welding of 304 Stainless Steel

  • Moon, Kyung-Man;Lee, Myung-Hoon
    • Corrosion Science and Technology
    • /
    • 제9권6호
    • /
    • pp.294-299
    • /
    • 2010
  • Two types of welding methods were performed on austenitic 304 stainless steel: laser welding and TIG welding. The differences of the corrosion characteristics of the welded zones from the two welding methods were investigated with electrochemical methods, such as measurement of the corrosion potential, polarization curves, cyclic voltammogram, etc. The vickers hardness of all laser-welded zones (WM:Weld Metal, HAZ:Heat Affected Zone, BM:Base Metal) was relatively higher while their corrosion current densities exhibited a comparatively lower value than those which were TIG welded. In particular, the corrosion current density of the TIG-welded HAZ had the highest value among all other welding zones, which suggests that chromium depletion due to the formation of chromium carbide occurs in the HAZ, which is in the sensitization temperature range, thus it can easily be corroded with an active anode. Intergrenular corrosion was also observed at the TIG-welded HAZ and WM zones. Consequently, we can see that corrosion resistance of all austenitic 304 stainless steel welding zones can be improved via the use of laser welding.