• 제목/요약/키워드: Active tracking

검색결과 462건 처리시간 0.028초

A SHIPBOARD MULTISENSOR SOLUTION FOR THE DETECTON OF FAST MOVING SMALL SURFACE OBJECTS

  • Ko, Hanseok
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1995년도 Proceedings of the Korea Automation Control Conference, 10th (KACC); Seoul, Korea; 23-25 Oct. 1995
    • /
    • pp.174-177
    • /
    • 1995
  • Detecting a small threat object either fast moving or floating on shallow water presents a formidable challenge to shipboard sensor systems, which must determine whether or not to launch defensive weapons in a timely manner. An integrated multisensor concept is envisioned wherein the combined use of active and passive sensor is employed for the detection of short duration targets in dense ocean surface clutter to maximize detection range. The objective is to develop multisensor integration techniques that operate on detection data prior to track formation while simultaneously fusing contacts to tracks. In the system concept, detections from a low grazing angle search radar render designations to a sensor-search infrared sensor for target classification which in turn designates an active electro-optical sensor for sector search and target verification.

  • PDF

영구자석 동기발전기 시스템을 위한 회전자 관성에너지를 이용한 Sliding Mode제어 기반 LVRT 제어 (Use of Stored Energy in Rotor Inertia for LVRT of PMSG Wind turbine based on Sliding Mode Control)

  • 정대헌;계용호;김청훈;정정주
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2015년도 제46회 하계학술대회
    • /
    • pp.1058-1059
    • /
    • 2015
  • This paper describes a low-voltage ride-through method for the permanent magnet synchronous generator (PMSG) wind turbine system at a grid fault. The generator side converter regulates the DC link voltage instead of the grid side converter by storing the surplus active power in the rotor inertia during grid fault by the sliding mode controller. The grid side converter controls the grid active power keeping a maximum power point tracking. Simulation results for small scale PMSG wind turbine verify the efficiency of the control method.

  • PDF

부분 외곽선 정보를 이용한 이동물체의 추척 알고리즘 (A Study on Tracking Algorithm for Moving Object Using Partial Boundary Line Information)

  • 조영석;이주신
    • 정보처리학회논문지B
    • /
    • 제8B권5호
    • /
    • pp.539-548
    • /
    • 2001
  • 본 연구에서는 배경과 구분되는 이동물체를 추적하기 위한 방법으로 부분 외곽선 정보를 이용한 이동물체 추적 알고리즘을 제안하였다. 이동물체의 추적은 이동물체의 외곽선을 검출한 다음 외곽선 정보를 이동물체의 특징으로 정하여 추적하는 알고리즘을 사용하였다. 먼저 이동물체 외곽선 정보를 이용하여 연속한 동영상 입력에 대하여 속 BMA(Block Matching Algorithm)을 이용하여 움직임 벡터를 추출하고 움직임 벡테를 기초로 이동물체를 추출한다. 다음은 이동물체 초기 특징 벡테 생성단계로서 이동물체에 대한 외곽선을 추출한다. 이동물체의 외곽선 영역 중 상하좌우의 외곽선 일부분을 특징벡터로 정한다. 다음은 추적단계로 이전 프레임에서 얻은 특징벡터를 이용하여 현재 프레임에서 이동물체의 추적을 수행하였다. 제안된 알고리즘에 대하여 실제영상을 가지고 이동물체추적 모의 실험을 수행한 결과 기존 능동 윤곽선 추적알고리즘은 물체 외곽선 전체를 추적하기 때문에 물체의 외곽선 길이에 따라 처리시간이 변화하지만 제안된 알고리즘은 이동물체의 외곽선 영역을 특징정보로 하여 추적하기 때문에 추적연산이 간단하였다. 제안된 이동물체 추적알고리즘 중 이동벡터를 추출하는 BMA 연산은 기존 알고리즘 보다 연산량이 약 39%감소였으며, 상하 좌우 외곽선 정보를 이용하여 이동물체를 추적한 결과 추적오차는 특징벡터의 크기가 [$10{\times}5$]일 때 검색오차가 2화소 이하로 양호하게 나타났다. 또한 기본 능동 윤ㅅ곽선 축적알고리즘은 물체 외곽선 크기에 따른 처리시간이 변화하지만 제안된 알고리즘은 특징벡터의 크기가 일정하기 때문에 동일한 처리시간이 필요하였다.

  • PDF

3차원 추적영역 제한 기법을 이용한 손 동작 인식 시스템 (A Hand Gesture Recognition System using 3D Tracking Volume Restriction Technique)

  • 김경호;정다운;이석한;최종수
    • 전자공학회논문지
    • /
    • 제50권6호
    • /
    • pp.201-211
    • /
    • 2013
  • 본 논문에서는 손 추적과 제스처 인식 시스템을 제안한다. 제안한 시스템은 사용자 손의 3차원 기하학적 정보를 취득하기 위해 별도의 장비를 사용한다. 특히, 기존의 물체 검출 및 추적 시스템들에서 제기 되었던 추적 과정에서의 문제점을 피하기 위해 능동적인 타원체 영역을 만들고 손 추적을 위한 영역을 타원체 영역의 안으로 제한했다. 제안된 시스템은 미리 정의된 기간 동안에 손 위치의 이동평균을 계산한다. 그리고 추적영역은 3차원 공간에 편성된 공분산에 기반한 사용자 손 움직임의 불확실성을 추정하여 통계적인 데이터에 따라 능동적으로 제어하였다. 또한 손 위치가 획득되었을 때, 손 제스처를 인식하기 위해 펼쳐진 손가락을 검출한다. 사용자 인터페이스 체제 기반의 시스템을 구현하여 복잡한 환경에서 다중의 대상들이 동시에 존재하는 경우이거나 일시적인 가려짐이 발생하는 경우에도 정확성을 보여 매우 안정적으로 동작할 수 있음을 보여주며, 약 24-30fps의 프레임 비율로 사용할 수 있는 가능성을 보여주었다.

Developing a smart structure using integrated DDA/ISMP and semi-active variable stiffness device

  • Karami, Kaveh;Nagarajaiah, Satish;Amini, Fereidoun
    • Smart Structures and Systems
    • /
    • 제18권5호
    • /
    • pp.955-982
    • /
    • 2016
  • Recent studies integrating vibration control and structural health monitoring (SHM) use control devices and control algorithms to enable system identification and damage detection. In this study real-time SHM is used to enhance structural vibration control and reduce damage. A newly proposed control algorithm, including integrated real-time SHM and semi-active control strategy, is presented to mitigate both damage and seismic response of the main structure under strong seismic ground motion. The semi-active independently variable stiffness (SAIVS) device is used as semi-active control device in this investigation. The proper stiffness of SAIVS device is obtained using a new developed semi-active control algorithm based on real-time damage tracking of structure by damage detection algorithm based on identified system Markov parameters (DDA/ISMP) method. A three bay five story steel braced frame structure, which is equipped with one SAIVS device at each story, is employed to illustrate the efficiency of the proposed algorithm. The obtained results show that the proposed control algorithm could significantly decrease damage in most parts of the structure. Also, the dynamic response of the structure is effectively reduced by using the proposed control algorithm during four strong earthquakes. In comparison to passive on and off cases, the results demonstrate that the performance of the proposed control algorithm in decreasing both damage and dynamic responses of structure is significantly enhanced than the passive cases. Furthermore, from the energy consumption point of view the maximum and the cumulative control force in the proposed control algorithm is less than the passive-on case, considerably.

실시간 위치추적을 위한 2.45GHz 능동형 고주파 시스템에 관한 연구 (A Study of 2.45GHz Active RF System for Real Time Location)

  • 김진영;정용섭;강준희
    • 대한공간정보학회지
    • /
    • 제16권3호
    • /
    • pp.43-49
    • /
    • 2008
  • 실시간 위치추적 (Real Time Location System ; RTLS) 시스템은 유비쿼터스 사회에서 인물, 자산, 물류제품을 실시간으로 추적하기 위해 매우 중요하다. 본 연구에서는 RTLS를 위해 능동형 RF 시스템을 개발하였고 개발된 시스템의 성능을 측정하였다. 본 시스템에서 개발한 RTLS 시스템은 3개의 능동형 리더(수신기)와 1개의 태그로 구성되었다. 개발된 능동형 소형 태그에는 동전형 배터리를 내장하였다. 태그의 소형화를 위해 내장형 PCB 안테나와 칩 안테나를 장착하여 태그의 성능을 측정하였다. 또한, RF 시스템의 제조 원가를 줄이기 위해 저가의 RF 트랜시버 CC2510 칩셋을 사용하였다. CC2510 칩셋은 능동형 태그와 능동형 리더 (수신기)사이의 거리를 측정하기 위한 수신신호 강도지시기가 (Received Signal Strength Indicator ; RSSI) 내장되어있다.

  • PDF

Semi-active control of ship mast vibrations using magneto-rheological dampers

  • Cheng, Y.S.;Au, F.T.K.;Zhong, J.P.
    • Structural Engineering and Mechanics
    • /
    • 제30권6호
    • /
    • pp.679-698
    • /
    • 2008
  • On marine vessels, delicate instruments such as navigation radars are normally mounted on ship masts. However the vibrations at the top of mast where the radar is mounted often cause serious deterioration in radar-tracking resolution. The most serious problem is caused by the rotational vibrations at the top of mast that may be due to wind loading, inertial loading from ship rolling and base excitations induced by the running propeller. This paper presents a method of semi-active vibration control using magneto-rheological (MR) dampers to reduce the rotational vibration of the mast. In the study, the classical optimal control algorithm, the independent modal space control algorithm and the double input - single output fuzzy control algorithm are employed for the vibration control. As the phenomenological model of an MR damper is highly nonlinear, which is difficult to analyse, a back- propagation neural network is trained to emulate the inverse dynamic characteristics of the MR damper in the analysis. The trained neural network gives the required voltage for each MR damper based on the displacement, velocity and control force of the MR damper quickly. Numerical simulations show that the proposed control methods can effectively suppress the rotational vibrations at the top of mast.

경사 전극 배열을 이용한 고밀도 하드 디스크의 마이크로 구동부 제작 (A Microcatuator for High-Density Hard Disk Drive Using Skewed Electrode Arrays)

  • 최석문;박성준
    • 융복합기술연구소 논문집
    • /
    • 제1권2호
    • /
    • pp.6-15
    • /
    • 2011
  • This paper reports the design and fabrication of a micro-electro-mechanical-system(MEMS)-based electrostatic angular microactuator for a dual-stage servo. The proposed actuator employs a novel electrode pattern named "skewed electrode array(SEA)" scheme. It is shown that SEA has better linearity than a parallel plate type actuator and stronger force than a comb-drive based actuator. The moving and the fixed electrodes are arranged to make the driving force perpendicular to the rotating moment of arm. By changing the electrode overlap length, the magnitude of electrostatic force and stable displacement will be changed. In order to optimize the design, an electrostatic FE analysis was carried out and an empirical force model was established for SEA. A new assembly method which will allow the active electrodes to be located beneath the slider was developed. The active electrodes are connected by inner and outer rings lifted on the base substrate, and the inner and outer rings are connected to platform on which the slider locates. Electrostatic force between active electrodes and platform can be used for exiting out of plane modes, so this provides the possibility of the flying height control. A microactuator that can position the pico-slider over ${\pm}0.5{\mu}m$ using under 20 volts for a 2 kHz fine-tracking servo was designed and fabricated using SoG process.

  • PDF

영구자석을 이용한 밸브모드 MR 감쇠기 설계에 관한 연구 (A Study on the Design of Valve Mode MR Damper using Permanent Magnet)

  • 김정훈;오준호
    • 한국정밀공학회지
    • /
    • 제17권10호
    • /
    • pp.69-76
    • /
    • 2000
  • Lots of semi-active control devices have been developed in recent years because they have the best features of passive and active system. Especially, controllable magneto-rheological(MR) fluid devices have received significant attention in these area of research. The MR fluid is the material that reversibly changes from a free-flowing, linear viscous fluid to a semisolid with a controllable yield strength in milliseconds when exposed to a magnetic field. If the magnetic field is induced by moving a permanent magnet instead of applying current to a solenoid, it is possible to design a MR damper consuming low power because the power consumption is reduced at steady state. This paper proposes valve mode MR damper using permanent magnetic circuit that has wide range of operation with low power consumption, a design parameter is adopted. The magnetic circuit, material of choke and choke type are selected experimentally with the design parameter. The behaviors of the damper are examined and torque tracking control using PID feedback controller is performed for step, ramp and sinusoidal trajectiories.

  • PDF

그림자 영향을 고려한 PV 시스템의 능동형 MPPT 알고리즘 개발 (Development of Active MPPT Algorithm of PV system Considering Shadow Influence)

  • 문주희;고재섭;강성준;장미금;김순영;이진국;정동화
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2011년도 제42회 하계학술대회
    • /
    • pp.1384-1385
    • /
    • 2011
  • This paper presents the active maximum power point tracking(MPPT) control of the photovoltaic(PV) module integrated converter(MIC) system considering the shadow influence. Conventional perturbation and observation(PO) and incremental conductance(IC) are the method finding MPP by the continued self-excitation vibration. The MPPT control is unable to be performed by rapid output change affected by the shadow. To solve this problem, the active MPPT in which the step value changes by output change is presented. In case there are the solar radiation, a temperature and shadow influence, the presented algorithm treats and compares the conventional control algorithm and output error. In addition, the validity of the algorithm is proved through the output error response characteristics.

  • PDF