• Journal of Environmental Impact Assessment
• /
• v.25 no.1
• /
• pp.1-14
• /
• 2016

With the continuous expansion of highway network and its traffics, neighboring wildlife habitats are splitted into smaller and more isolated patches. The infrastructures contribute to the wildlife-vehicle collision by creating barriers to animal movement. This kinds of traffic accidents are dangerous factors to the drivers' safety and the facilities on the highway as well as to the wildlife themselves. One of the most common ways to prevent habitat fragmentation are fauna crossings and fences. The cost of the mitigation measures to prevent wildlife-vehicle collision could be monetized. However their economic benefits are difficult to be measured. Using contingent valuation method, this study tries to estimate the economic valuation of wildlife collision prevention projects on the Korean highways. The result shows that 43.88% of Korean household had the positive willingness pay to the projects. Moreover, we found that the recognition of the project or the favourable attitude to the environmental issues could raise the willingness-to-pay. Therefore, active public relation on the project could make the friendly public opinion and increase the number of the household which has the positive willingness-to-pay on the project.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.3
• /
• pp.193-198
• /
• 2016

Lane change is an important issue in microscopic traffic flow simulations and active safety. Overtaking and changing lanes are dangerous driving maneuvers. This approach presents a lane-changing system based on speed and a minimum gap between vehicles in a vehicular ad hoc network (VANET). This paper proposes a solution to ensure the safety of drivers while changing lanes on highways. Efficient routing protocols could play a crucial role in VANET applications, safeguarding both drivers and passengers, and thus, maintaining a safe on-road environment. This paper focuses on the development of an intelligent transportation system that provides timely, reliable information to drivers and the concerned authorities. A test bed is created for the techniques used in the proposed system, where analysis takes place in an on-board embedded system designed for vehicle navigation. The designed system was tested on a four-lane road in Neemrana, India. Successful simulations were conducted with real-time network parameters to maximize quality of service and performance using Simulation of Urban Mobility and Network Simulator 2 (NS-2). The system implementation, together with the findings, is presented in this paper. Illustrating the approach are results from simulation using NS-2.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.9 s.351
• /
• pp.49-59
• /
• 2006

DAS(Driver Assistance Systems) support the driver's decision making to increase safety and comfort by issuing the naming signals or even exert the active control in case of dangerous conditions. Most previous research and products intend to offer only a single warning service like the lane departure warning, collision warning, lane change assistance, etc. Although these functions elevate the driving safety and convenience to a certain degree, New type of DAS will be developed to integrate all the important functions with an efficient HMI (Human-Machine Interface) framework for various driving conditions. We propose an all-around sensing based on the integrated DAS that can also remove the blind spots using 2 cameras and 8 sonars, recognize the driving environment by lane and vehicle detection, construct a novel birds-eye HMI for easy comprehension. it can give proper warning in case of imminent danger.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.1
• /
• pp.19-30
• /
• 2023

An electric scooter(e-scooter), one popularized micro-mobility vehicle has shown rapidly increasing use in many cities. In South Korea, the use of e-scooters has greatly increased, as some companies have launched e-scooter sharing services in a few large cities, starting with Seoul in 2018. However, the use of e-scooters is still controversial because of issues such as parking and safety. Since the perception toward the means of transportation affects the mode choice, it is necessary to track the trends for electric scooters to make the use of e-scooters more active. Hence, this study aimed to analyze the trends related to e-scooters. For this purpose, we analyzed news articles related to e-scooters published from 2014 to 2020 using dynamic topic modeling to extract issues and sentiment analysis to investigate how the degree of positive and negative opinions in news articles had changed. As a result of topic modeling, it was possible to extract three different topics related to micro-mobility technologies, shared e-scooter services, and regulations for micro-mobility, and the proportion of the topic for regulations for micro-mobility increased as shared e-scooter services increased in recent years. In addition, the top positive words included quick, enjoyable, and easy, whereas the top negative words included threat, complaint, and ilegal, which implies that people satisfied with the convenience of e-scooter or e-scooter sharing services, but safety and parking issues should be addressed for micro-mobility services to become more active. In conclusion, this study was able to understand how issues and social trends related to e-scooters have changed, and to determine the issues that need to be addressed. Moreover, it is expected that the research framework using dynamic topic modeling and sentiment analysis will be helpful in determining social trends on various areas.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.47-56
• /
• 2022

The safe driving reward system aims to reduce the loss of life and property by reducing the occurrence of accidents by motivating safe driving and encouraging active participation by providing direct reward to vehicle drivers who have performed safe driving. In the case of the existing digital tachograph, the goal is to limit dangerous driving by recording the driving status of the vehicle whereas the safe driving reward system is a support measure to increase the effect of accident prevention and induces safe driving with financial reward when safe driving is performed. In other words, in an area where accidents due to speeding are high, direct reward is provided to motivate safe driving to prevent traffic accidents when safe driving instructions such as speed compliance, maintaining distance between vehicles, and driving in designated lanes are performed. Since these safe operation data and reward histories must be managed transparently and safely, the reward evidences and histories were constructed using the closed blockchain Hyperledger Fabric. However, while transparency and safety are guaranteed in the blockchain system, low data processing speed is a problem. In this study, the sequential block generation speed was as low as 10 TPS(transaction per second), and as a result of applying the acceleration function a high-performance network of 1,000 TPS or more was implemented.

• Journal of the Korean Electrochemical Society
• /
• v.25 no.4
• /
• pp.184-190
• /
• 2022

Spinel LiMn₂O₄ (LMO) and layered LiNi_0.5Co_0.2Mn_0.3O₂ (NCM) are widely used as positive electrode materials for lithium-ion batteries. LMO and NCM positive electrode materials have a complementary properties. LMO has low cost and high safety and NCM materials show a relatively high specific capacity and better cycle life even at elevated temperature. Therefore, the LMO and NCM active materials are blended and used as a positive electrode in large-size batteries for electric vehicles (xEV). In this study, the cycle performance of a blended electrode prepared by simply mixing LMO and NCM and a bi-layer electrode in which two electrode layers aree sequentially coated are compared. The bi-layer electrode prepared by composing the same ratio of both active materials has similar capacity and cycle performance to the blend electrode. However, the LN electrode coated with LMO first and then NCM is the best in the full cell cycle performance at elevated temperature, and the NL electrode, in which NCM is first coated with LMO has a faster capacity degradation than the blended electrode because LMO is mainly located on the top of the electrode adjacent to electrolyte and graphite negative electrode. Also, the LSTA (linear sweep thermmametry) analysis results show that the LN bi-layer electrode in which the LMO is located inside the electrode has good thermal stability.

• Journal of the Korean Institute of Gas
• /
• v.13 no.6
• /
• pp.34-38
• /
• 2009

Nitrous oxide, which is used as an anesthetic gas, has been shown to be a chronic health hazard. It is necessary to monitor and control the nitrous oxide exposure of the operating theaters staff. In this study, N2O exposure level of the operating nurses is assessed with a GC-ECD. The nitrous oxide gas is collected on a molecular sieve 5A contained in a glass tube and desorbed for 12 hours at $100^{\circ}C$ in heating block. As a result of the test using GC-ECD, calibration curve's $R^2$ of $N_2O$ is 0.9992, LOD is $0.96{\mu}g$/injection, LOQ is $3.21{\mu}g$/injection, desorption efficiency is 94.78 4.50% in average and break through is within 10% compared with the concentration. The average concentration before operation is 5.12ppm and it is 42.3ppm during operation. There are a significant difference showing that the P value is lower than 0.05. Assessing exposure level to nitrous oxide based on nurses' working positions, the exposure levels do not show significant difference( P>0.005). And $N_2O$ in active sampling method is higher than passive sampling method(P<0.05).

• The Korean Journal of Air & Space Law and Policy
• /
• v.33 no.1
• /
• pp.175-204
• /
• 2018

Recently, the aviation leisure business has been legislated, and related industries have become active base with increasing the light sports aircraft within the legislation system. However, in the light sports aircraft safety problem, it is often mentioned that the flight is in violation of the regulations, the lack of safety consciousness of the operator and lack of ability, and the personal operators have a risk of accident of light aircraft such as insufficient safety management and poor maintenance. At present, the maintenance of light sports aircraft is carried out by the A & P mechanic in accordance with the relevant laws and regulations, but it is difficult to say that it is equipped with qualification and expertise. It is not a legal issue to undertake light sports aircraft maintenance work on the regulation system. However, the problem of reliability and appropriateness is constantly being raised because airplanes, light sports aircraft, and ultra-light vehicle are classified and serviced in a legal method. Although legal and institutional frameworks for light sports aircraft are separated, much of it is stipulated in the aviation law provisions. Light sports aircraft maintenance work also follows the current aircraft maintenance system. In the United States, Europe, and Australia where General Aviation developed, legal and institutional devices related to maintenance of light aircraft were introduced, and specialized maintenance tasks are covered in the light aircraft mechanics system. As a result of analysis of domestic and foreign laws and regulations, it is necessary to introduce the qualification system for maintenance of light aircraft. In advanced aviation countries such as the United States, Europe, and Australia, a light sports aircraft repairman system is installed to perform safety management. This is to cope with changes in the operating environment of the new light sports aircraft. This study does not suggest the need for a light aircraft repairman system. From the viewpoint of the legal system, the examination of the relevant laws and regulations revealed that the supplementary part of the system is necessary. It is also require that the necessity of introduction is raised in comparison with overseas cases. Based on these results, it is necessary to introduce the system into the light aircraft repairman system, and suggestions for how to improve it are suggested.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.04a
• /
• pp.1-2
• /
• 2011

Hybrid rockets have lately attracted attention as a strong candidate of small, low cost, safe and reliable launch vehicles. A significant topic is that the first commercially sponsored space ship, SpaceShipOne vehicle chose a hybrid rocket. The main factors for the choice were safety of operation, system cost, quick turnaround, and thrust termination. In Japan, five universities including Hokkaido University and three private companies organized "Hybrid Rocket Research Group" from 1998 to 2002. Their main purpose was to downsize the cost and scale of rocket experiments. In 2002, UNISEC (University Space Engineering Consortium) and HASTIC (Hokkaido Aerospace Science and Technology Incubation Center) took over the educational and R&D rocket activities respectively and the research group dissolved. In 2008, JAXA/ISAS and eleven universities formed "Hybrid Rocket Research Working Group" as a subcommittee of the Steering Committee for Space Engineering in ISAS. Their goal is to demonstrate technical feasibility of lowcost and high frequency launches of nano/micro satellites into sun-synchronous orbits. Hybrid rockets use a combination of solid and liquid propellants. Usually the fuel is in a solid phase. A serious problem of hybrid rockets is the low regression rate of the solid fuel. In single port hybrids the low regression rate below 1 mm/s causes large L/D exceeding a hundred and small fuel loading ratio falling below 0.3. Multi-port hybrids are a typical solution to solve this problem. However, this solution is not the mainstream in Japan. Another approach is to use high regression rate fuels. For example, a fuel regression rate of 4 mm/s decreases L/D to around 10 and increases the loading ratio to around 0.75. Liquefying fuels such as paraffins are strong candidates for high regression fuels and subject of active research in Japan too. Nakagawa et al. in Tokai University employed EVA (Ethylene Vinyl Acetate) to modify viscosity of paraffin based fuels and investigated the effect of viscosity on regression rates. Wada et al. in Akita University employed LTP (Low melting ThermoPlastic) as another candidate of liquefying fuels and demonstrated high regression rates comparable to paraffin fuels. Hori et al. in JAXA/ISAS employed glycidylazide-poly(ethylene glycol) (GAP-PEG) copolymers as high regression rate fuels and modified the combustion characteristics by changing the PEG mixing ratio. Regression rate improvement by changing internal ballistics is another stream of research. The author proposed a new fuel configuration named "CAMUI" in 1998. CAMUI comes from an abbreviation of "cascaded multistage impinging-jet" meaning the distinctive flow field. A CAMUI type fuel grain consists of several cylindrical fuel blocks with two ports in axial direction. The port alignment shifts 90 degrees with each other to make jets out of ports impinge on the upstream end face of the downstream fuel block, resulting in intense heat transfer to the fuel. Yuasa et al. in Tokyo Metropolitan University employed swirling injection method and improved regression rates more than three times higher. However, regression rate distribution along the axis is not uniform due to the decay of the swirl strength. Aso et al. in Kyushu University employed multi-swirl injection to solve this problem. Combinations of swirling injection and paraffin based fuel have been tried and some results show very high regression rates exceeding ten times of conventional one. High fuel regression rates by new fuel, new internal ballistics, or combination of them require faster fuel-oxidizer mixing to maintain combustion efficiency. Nakagawa et al. succeeded to improve combustion efficiency of a paraffin-based fuel from 77% to 96% by a baffle plate. Another effective approach some researchers are trying is to use an aft-chamber to increase residence time. Better understanding of the new flow fields is necessary to reveal basic mechanisms of regression enhancement. Yuasa et al. visualized the combustion field in a swirling injection type motor. Nakagawa et al. observed boundary layer combustion of wax-based fuels. To understand detailed flow structures in swirling flow type hybrids, Sawada et al. (Tohoku Univ.), Teramoto et al. (Univ. of Tokyo), Shimada et al. (ISAS), and Tsuboi et al. (Kyushu Inst. Tech.) are trying to simulate the flow field numerically. Main challenges are turbulent reaction, stiffness due to low Mach number flow, fuel regression model, and other non-steady phenomena. Oshima et al. in Hokkaido University simulated CAMUI type flow fields and discussed correspondence relation between regression distribution of a burning surface and the vortex structure over the surface.