Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제33권2호
/
pp.124-130
/
2007
In the present study, I investigated the effects of N-methyl-D-aspartate (NMDA), arachidonic acid (AA), and Nitric Oxide Synthase Inhibitor (NOSI), alone or in combination, on the proliferation of cultured primary normal human oral keratinocytes (NHOK). The purpose of this study was therefore the preliminary study for the examination of the interaction between these agents and NHOK in order to elucidate the mechanisms by which epithelial growth and regeneration are regulated. NHOK were obtained from gingival tissue of 20 individuals aged 20 to 29, and third passage (P3) cells were used for this study. The DNA synthesis was measured by the BrdU assay. Addition of low concentration of AA ($1{\mu}M$) and high concentration of AA with NMDA group (NMDA+AA $10{\mu}M$) made DNA synthesis rate increase significantly at the early stage. Adding NNA ($10{\mu}M$) affected DNA synthesis rate to increase significantly in 4 hours. At the early stage, DNA synthesis was significantly active in the NOS-I with NMDA groups than in the control and the NMDA-only group, while it didn't become statistically meaningful in 24 hours. AA $1{\mu}M$ and NNA $10{\mu}M$ may induce the proliferation of the NHOK independently and NOS-I may induce the proliferation of the NHOK with NMDA. These reactions might be related to the NMDA receptor in the cell and the change of the intracellular calcium ion concentration.
본 연구에서는 유자의 미성숙 배로부터 캘러스 유도와 재분화 및 발생단게별 미세구조적 특성에 관하여 연구하였다. 유자에서는 배양 5-6주 경에 담황색의 캘러스가 유도되었으며, 배양 6주경의 캘러스 세포에서는 인접하고 있는 작은 액포들이 융합하여 큰 액포를 형성하는 융합현상을 관찰하였다. 배양 12주 경에는 배발생 캘러스의 미분화 세포에서 특이하게 구형의 핵인을 가지고 있는 큰핵과 녹말로 가득차 있는 녹말체를 다수 관찰하였다. 배양 14-16주 경의 배발생 캘러스 세포에서는 활발하게 exocytosis가 일어나므로서 다수의 분배체들이 세포벽쪽에서 관찰되었으며 세포질로부터 작은 입자들이 세포 간극으로 빠져나가는 것을 볼수 있었다. 또한 배양 24주경의 배발생 캘러스에서는 발달된 커다란 구형의 엽록체들이 이중막으로 세포질과 경계되어 있었으며 기질중에 일정하게 전형적인 그라나가 분포되어 있었다. 배양 26주경의 어린 정상 식물체의 미성숙잎에서는 다수의 도관과 반세포들이 관찰되었다. 배양 30주경의 정상식물체의 미성숙잎에는 다수의 작은 반세포들과 사관 그리고 중심액포들이 나타났으며 또한 작은 제2차 액포들이 커다란 중심 액포 속으로 끼어들어가는 현상을 볼 수 있었으며 원형질막 근처에는 신장된 엽록체들이 분포되어 있었다.
In chemical-looping combustion, pure oxygen is transferred to fuel by solid particles called as oxygen carrier. Chemical-looping combustion process usually utilizes a circulating fluidized-bed process for fuel combustion and regeneration of the reduced oxygen carrier. The performance of an oxygen carrier varies with the active metal oxide and the raw support materials used. In this work, spraydried Mn-based oxygen carriers were prepared with different raw support materials and their physical properties and oxygen transfer performance were investigated to determine that the raw support materials used are suitable for spray-dried manganese oxide oxygen carrier. Oxygen carriers composed of 70 wt% $Mn_3O_4$ and 30 wt% support were produced using spray dryer. Two different types of $Al_2O_3$, ${\gamma}-Al_2O_3$ and ${\alpha}-Al_2O_3$, and $MgAl_2O_4$ were applied as starting raw support materials. The oxygen carrier prepared from ${\gamma}-Al_2O_3$ showed high mechanical strength stronger than commercial fluidization catalytic cracking catalyst at calcination temperatures below $1100^{\circ}C$, while the ones prepared from ${\alpha}-Al_2O_3$ and $MgAl_2O_4$ required higher calcination temperatures. Oxygen transfer capacity of the oxygen carrier prepared from ${\gamma}-Al_2O_3$ was less than 3 wt%. In comparison, oxygen carriers prepared from ${\alpha}-Al_2O_3$ and $MgAl_2O_4$ showed higher oxygen transfer capacity, around 3.4 and 4.4 wt%, respectively. Among the prepared Mn-based oxygen carriers, the one made from $MgAl_2O_4$ showed superior oxygen transfer performance in the chemical-looping combustion of $CH_4$, $H_2$, and CO. However, it required a high calcination temperature of $1400^{\circ}C$ to obtain strong mechnical strength. Therefore, further study to develop new support compositions is required to lower the calcination temperature without decline in the oxygen transfer performance.
본 연구에서는 Gap 갱신이 이루어지는 소나무를 대상으로 인위적으로 조성한 Gap처리구에서 소나무 묘목의 생장 및 광도의 변화에 따른 광합성속도, 중산속도 등 생리적 특성의 변화를 분석하고 Gap 생장환경에 대한 소나무 묘목의 적응과정에 대한 연구를 통해 갱신기작을 구명하고자 하였다. Open된 생장환경에 비해 광도가 낮고 광질이 다른 Gap처리구에서 소나무 묘목은 근원경보다는 상대적으로 묘고의 생장량이 더 많이 이루어졌고 건중량의 증가비율도 지하부보다는 지상부에서 상대적으로 크게 나타나 비교적 높은 T/R율을 보였다. 소나무 묘목의 지상부 C/F비율(지상부의 비동화기관과 동화기관 건중량의 비율)도 Gap처리구에서는 Open 생장환경에 비해 0.1~0.2정도 높았으며 광포화점은 $300{\mu}mol\;m^{-2}s^{-1}$정도 낮았고 광보상점도 40%정도 낮게 나타나 양수이지만 내음성을 나타내었다. 또한 광도가 $400{\sim}450{\mu}mol\;m^{-2}s^{-1}$보다 낮을 때 소나무 묘목은 비교적 높은 광합성속도와 수분이용효율을 나타내었으며 약한 광에너지를 효율적으로 이용하였다.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제31권6호
/
pp.481-491
/
2005
Purpose: The aim of the present study is to evaluate the effect of autogenous bone and allograft material coverd with a bioresorbable membrane on bone regeneration after a simultaneous installation of implant. Materials and methods: Twelve healthy rabbits, weighing about $3{\sim}4$ kg, were used in this experiment. Following impalnt(with 3.25 mm diameter and 8 mm length) site preparation by surgical protocol of $Oraltronics^{(R)}$, artificial bony defect, 5mm sized in height and depth, was created on femoral condyle using trephine drill(with 5 mm diameter and 5 mm length). Then implant was inserted. In the experimental group A, the bony defect was filled with autogenous particulated bone and coverd with $Lyoplant^{(R)}$ resorbable membrane. In the experimental group B, the bony defect was filled with allograft material(Orthoblast $II^{(R)}$) containing demineralized bone matrix and covered with $Lyoplant^{(R)}$. In the control group, without any graft materials, the bony defect was covered with $Lyoplant^{(R)}$. The experimental group A and B were divided into each 9 cases and control group into 3 cases. The experimental animals were sacrificed at 3, 6 and 8 weeks after surgery and block specimens were obtained. With histologic and histomorphometric analysis, we observed the histologic changes of the cells and bone formation after H-E staining and then, measured BIC and bone density with KAPPA Image $Base^{(R)}$ system. Results: As a result of this experiment, bone formation and active remodeling process were examined in all experimental groups and the control. But, the ability of bone formation of the experimental group A was somewhat better than any other groups. Especially bone to-implant contact fraction ranged from 12.7% to 43.45% in the autogenous bone group and from 9.02% to 29.83% in DBM group, at 3 and 8 weeks. But, bone density ranged from 15.67% to 23.17% in the autogenous bone group and from 25.95% to 46.06% in DBM group at 3 and 6 weeks, respectively. Although the bone density of DBM group was better than that of autogenous bone group at 3 and 6weeks, the latter was better than the former at 8 weeks, 54.3% and 45.1%, respectively. Therefore these results showed that DBM enhanced the density of newly formed bone at least initially.
The regeneration of lost periodontal tissue is a major goal of therapy. Periodontal ligament cell(PDL) is a specialized connective tissue that connects cementum and alveolar bone to maintain and support teeth in situ and preserve tissue homoeostasis. Bone morphogenetic proteins(BMPs) have shown much potential in the reconstruction of the periodontum by stimulate new bone and new cementum formation. Limitiations of BMP administration to periodontal lesions is high dose delivery, BMP transient biological activity, and low bioavailability of factors at the wound site. Gene delivery method can be alternative treatment strategy to deliver BMPs to periodontal tissue. The purpose of this study is to investigate efficiency of BMP-2 gene delivery with cell-based therapy using PDL cells. PDL cell were transduced with adenoviruses encoding either BMP-2 or Lac-Z gene. To evaluate osteogenic activity of expressed BMP-2 on PDL cells, we investigated secreted BMP-2, cellular activity, ALPase, produced mineralized nodules. To evaluate collagen scaffold as carrier for transduced cell delivery, we examined morphology and secreted BMP-2 of transducd PDL cells on it. BMP-2 transducd PDL cells produced higher levels of BMP-2, ALPase, mineralized nodules than non transduced cells. Cellular activity of transduced cells was showed similar activity to non transduced cells. Transduce cells attached on collagen scaffold secreted BMP-2 at 7day and was showed similar morphology to non transduced cells. These results demonstrated that transduced PDL cells produced biologically active BMP-2 and collagen scaffold could be carrier of transducd cells.
Energy savings can be achieved with optimum energy consumptions, brake energy regeneration, efficient energy storage (onboard, line side), and primarily with light weight vehicles. Over the last few years, the rolling stock industry has experienced a marked increase in eco-awareness and needs for lower life cycle energy consumption costs. For rolling stock vehicle designers and engineers, weight has always been a critical design parameter. It is often specified directly or indirectly as contractual requirements. These requirements are usually expressed in terms of specified axle load limits, braking deceleration levels and/or demands for optimum energy consumptions. The contractual requirements for lower weights are becoming increasingly more stringent. Light weight vehicles with optimized strength to weight ratios are achievable through proven design processes. The primary driving processes consist of: $\bullet$ material selection to best contribute to the intended functionality and performance $\bullet$ design and design optimization to secure the intended functionality and performance $\bullet$ weight control processes to deliver the intended functionality and performance Aluminium has become the material of choice for modern light weight bodyshells. Steel sub-structures and in particular high strength steels are also used where high strength - high elongation characteristics out way the use of aluminium. With the improved characteristics and responses of composites against tire and smoke, small and large composite materials made components are also found in greater quantities in today's railway vehicles. Full scale hybrid composite rolling stock vehicles are being developed and tested. While an "overdesigned" bodyshell may be deemed as acceptable from a structural point of view, it can, in reality, be a weight saving missed opportunity. The conventional pass/fail structural criteria and existing passenger payload definitions promote conservative designs but they do not necessarily imply optimum lightweight designs. The weight to strength design optimization should be a fundamental design driving factor rather than a feeble post design activity. It should be more than a belated attempt to mitigate against contractual weight penalties. The weight control process must be rigorous, responsible, with achievable goals and above all must be integral to the design process. It should not be a mere tabulation of weights for the sole-purpose of predicting the axle loads and wheel balances compliance. The present paper explores and discusses the topics quoted above with a view to strengthen the recommendations and needs for the weight optimization by design approach as a pro-active design activity for the rolling stock industry at large.
최근 도시정책에서 도시공원이 차지하는 비중은 확대되고 있다. 좋은 도시공원체계 확보를 위해서 공원정책 및 계획에 대한 중요성이 커지고 있다. 이러한 상황에서 세계 주요도시의 공원녹지 관련 계획의 운영체계와 계획내용을 비교하는 것은 의미가 있다. 본 연구는 도시적 차원에서의 공원녹지기본계획의 운영체계 및 계획내용에 관한 비교연구이다. 연구대상지로는 영국 런던, 미국 뉴욕, 독일 베를린, 호주 시드니, 국내 서울을 선정하였고, 분석자료는 각 도시별 공원녹지 관련 기본계획 및 전략보고서를 중점적으로 분석하였다. 분석의 틀은 운영체계와 계획내용으로 구분하여 설정하였고 결과는 다음과 같다. 첫째, 공원녹지계획을 관련자원과 연계된 오픈 스페이스 계획으로 수립함으로써 자원의 통합적 관리 및 형평성에 대한 실천에 이바지하고자 한다. 둘째, 공원녹지계획이 초기의 양적 공급에서 질적가치의 향상으로 더 나아가 재활성화 및 재생에 이바지하는 방향으로 전환하고 있다. 셋째, '공급중심의 계획'에서 '수요에 기반한 평가' 모델로 전환함으로써 인구학적 변화, 트렌드 변화, 선호도 변화에 유연하게 대응하는 계획 모델로 수립되고 있다. 넷째, 계획의 주체, 수립단계별 참여 기회 확대, 참여구성원의 다양화를 통해 수동적 참여에서 적극적 참여계획으로 전환되고 있다. 공원녹지기본계획의 실천성을 제고하기 위해서는 공원녹지에 관한 새로운 인식변화를 적극 수용하고, 공원 거버넌스를 수용을 도입하며 상황에 기민하게 대응하는 유연한 계획접근이 필요하다.
본 실험은 화상을 입은 생쥐에서 SQ의 치유 효과를 알아보기 위함에 있다. 실험군은 7개군으로 구분하였다; 대조군, 화상군, 그리고 화상을 입헌 후 SQ를 처치한 군. 대조군을 제외한 모든 군은 등 부위에 2도 화상을 입혔다. SQ를 처치한 모든 군은 하루에 한 번씩 10초 간격으로 순수한 SQ 3방울을 도포하였다. 화상 후 10일 동안 조직학적 및 미세구조적 변화를 광학 현미경과 전자현미경으로 관찰하였다. 광학현미경으로 관찰한 결과, 화상군의 표피층의 모든 부분은 SQ를 처치한 군보다 더 심한 상처를 입었다. SQ를 처치한 6째와 10일째 군에서, 기저층은 분화가 활발하였고, 가시층의 각화세포는 수적으로 매우 증가하였다. 전자현미경으로 관찰한 결과, SQ를 처치한 모든 군의 기저층에서 세포분열이 화상군에서보다 더 활발하게 나타났다. 특히, SQ를 처치한 10일군에서는 이상적인 결과를 얻을 수 있었다; 대조군보다 더 두꺼운 가시층과 많은 각화세포, 뚜렷한 세포간교, 그리고 멜라닌세포를 포함하는 튼튼한 기저층. 이와 같은 결과로 보아 SQ은 표피성장인자(EGF)를 활성화시키고, 유해산소의 제거 역할을 하며, 막계에 에너지원을 제공할 가능성이 있다. 이 실험의 결과는 SQ가 화상 치료에 특수한 효과가 있다고 사료된다.
이 연구는 창작자들의 관점에서 만화클러스터의 창작환경, 혁신네트워크와 지역활성화 효과를 평가하고, 만화클러스터 충성도에 영향을 미치는 요인을 분석하는데 목적을 두고 있다. 이를 위하여 부천시의 만화클러스터 조성사례를 분석하였으며, 만화클러스터에서 활동하고 있는 만화창작 인력들을 대상으로 설문조사 및 심층인터뷰를 진행하였다. 조사 설계는 만화의 문화적 측면과 산업적 측면을 고려하여 만화클러스터에 관한 논의 외에도 문화클러스터, 문화산업클러스터, 창조클러스터에 관한 논의를 바탕으로 이루어졌다. 만화창작자의 인식은 만화클러스터의 창작 환경, 혁신환경, 도시활성화, 충성도를 중심으로 조사되었다. 분석결과, 만화창작 인력들은 만화클러스터가 시설 확보, 지식정보 교류, 관계 형성 측면에서 긍정적으로 작용하고 있다고 평가한 반면에 기업, 콘텐츠산업, 지역사회와의 소통과 협력 측면에서는 미흡한 것으로 평가하였다. 이것은 아직 만화클러스터의 혁신 환경이 미흡하다는 것을 의미한다고 볼 수 있다. 그리고 만화클러스터의 도시 브랜딩 효과는 비교적 높은 반면에 도시경제 활성화 효과는 낮게 평가되었다. 또한 만화클러스터에 대한 만족도와 충성도, 정책의지 등은 상당히 높게 평가되었다. 그리고 지식정보 요인, 정책요인, 지역활성화 효과 요인, 시설요인 등이 만화 창작인력의 클러스터 충성도에 영향을 미치는 요인으로 나타났는데, 정책적 요인과 지역활성화 효과 요인이 다른 요인들에 비해 충성도에 미치는 영향이 더 큰 것으로 나타났다. 이것은 만화클러스터 충성도가 시설 공간 및 지식정보 요인 등 단기적인 요인 보다는 정책적 요인, 지역활성화 효과 요인 등 비교적 장기적으로 지속 가능성에 영향을 미치는 요인들에 더 영향을 받고 있다는 것을 나타낸다고 할 수 있다. 이러한 분석결과를 바탕으로 이 연구에서는 만화클러스터의 지속발전 방향을 창작클러스터 측면과 만화 창조도시 측면에서 제시하였다. 장기적으로 만화클러스터가 지속, 발전하기 위해서는 문화적 접근과 경제적 접근을 통합적으로 추구할 필요가 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.