• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.268-275
• /
• 2024

The study examined the electrogeneration of hypochlorite ions (ClO^-) via electrolysis of aqueous NaCl solutions using a dimensionally stable anode-type (DSA-type) electrode based on platinum and palladium oxides supported on titanium mesh (Ti/PtPd(10%)O_x). The electrogenerated ClO^- was quantified on the basis of the absorption band at 292 nm (A_λ = 292) of the UV-Vis spectrum. The effect of initial pH, concentration of NaCl, cell potential difference and electrolysis time were investigated in this study. The results showed that the electrolysis of aqueous NaCl solutions increases the solution pH up to high values (≥ 8.0) that favor the formation of ClO^- over chlorine or hypochlorous acid. The hypochlorite concentration increases significantly at pH values > 7.0 and shows a linear trend with increasing NaCl concentration and with increasing cell potential difference. When the cell potential and NaCl concentration are held constant, the maximum hypochlorite value during electrolysis depends on both the cell potential and NaCl concentration. The Ti/PtPd(10%)O_x anode favors the production of hypochlorite ions, making this anode a promising material for use in electrochemical oxidation of wastewater via an indirect mechanism.

• Journal of the East Asian Society of Dietary Life
• /
• v.7 no.3
• /
• pp.315-324
• /
• 1997

Physicochemical properties of potato starches oxidized with sodium hypochlorite containing 1.5, 3.0, 4.5, and 6.0% active Cl/g starch at pH 7.0 were examined. Carboxyl group contents of oxidized potato starches were proportional to active chlorine concentration in use and water binding capacity, alkali number, and solubility increased with increasing the degree of oxidation. Blue value and iodine binding property indicated the change of amylose structure by the oxidation. Gelatinization trends obtained from transmittance and DSC thermograms showed that gelatinization temperature was lower as starch was oxidized higher. X-ray diffraction patterns and scanning electron micrographs implied oxidation might occur on the surface amorphous regions of starch granule.

• Resources Recycling
• /
• v.31 no.3
• /
• pp.61-72
• /
• 2022

We investigated the electrochemical behavior of Sn (93.0 %)-Ag (4.06 %)-Cu (0.89 %) during electrolysis of Pb-free solder waste to recover tin and silver. A thin strip of the solder waste produced by high-temperature melting and casting was used as a working electrode to perform electrochemical analysis. During anodic polarization, the current peak of an active region decreased with an increase in the concentration of sulfuric acid used as an electrolyte. This resulted in the electro-dissolution of the working electrode in the electrolyte (1.0 molL^-1 sulfuric acid) for a constant current study. The study revealed that the thickening of an anode slime layer at the working surface continuously increased the electrode potential of the working electrode. At 10 mAcm^-2, the dissolution reaction continued for 25 h. By contrast, at 50 mAcm^-2, a sharp increase in the electrode potential stopped the dissolution in 2.5 h. During dissolution, silver enrichment in the anode slime reached 94.3% in the 1 molL^-1 sulfuric acid electrolyte containing a 0.3 molL^-1 chlorine ion, which was 12.7% higher than that without chlorine addition. Moreover, the chlorine enhanced the stability of the dissolved tin ions in the electrolyte as well as the current efficiency of tin electro-deposition at the counter electrode.

• Clean Technology
• /
• v.18 no.4
• /
• pp.446-450
• /
• 2012

Strong alkaline electrolyzed water which is produced in cathode by electrolyzing the solution where electrolytes (NaCl, $K_2CO_3$ etc.) are added in diaphragm electrolytic cell, is eco-friendly and has cleaning effects. So, it is viewed as a substitution of chemical cleaner. In addition, strong alkaline electrolyzed water is being used by some Japanese automobile and precision parts manufacturing industries. When strong alkaline electrolyzed water is produced by using diaphragm electrolytic cell, it is necessarily produced at the anode side. Since strong acidic electrolyzed water produced is discarded when its utilization cannot be found, production efficiency of electrolyzed water is consequently decreased. Also, there is a weakness electrolytic efficiency is decreasing due to the pollution of diaphragm. In order to overcome this, non-diaphragm all-in-one electrolytic cell integrated with electrode reaction chamber and dilution chamber was applied. Strong alkaline electrolyzed water was produced for different composition of electrolytes, and their properties and characteristics were identified. In comparing the properties between strong alkaline electrolyzed water produced in diaphragm electrolytic cell and that produced in all-in-one electrolytic cell, the differences in ORP and chlorine concentration were found. In emulsification test to confirm surface-active capability, similar results were obtained and strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell was identified to be useable as a cleaner like strong alkaline electrolyzed water produced in diaphragm electrolytic cell. Strong alkaline electrolyzed water produced in non-diaphragm all-in-one electrolytic cell is thought to have sterilizing power because it has active chlorine which is different from strong alkaline electrolyzed water produced in diaphragm electrolytic cell.

• Microbiology and Biotechnology Letters
• /
• v.18 no.4
• /
• pp.331-337
• /
• 1990

An antitumor antibiotic named B-1123 substance was isolated from the culture filtrate of a new isolate fungus identified as Aspergillus terreus. The fermentation yield reached about 23 mg per liter of the broth. The B-1123 substance, chlorine containing antibiotic, has the molecular formular of $C_{17}H_{12}0_7C_{12}$. Its structure was determined to be geodin by spectroscopic data. It is active against some Gram-positive bacteria and it prolongs the life span of mice inoculated with Ehrlich carcinoma.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.180-181
• /
• 2019

In this study, in order to find new uses for CBS dust, the chemical components of CBS dust were analyzed and effectively proposed a method. Chemical analysis shows that CBS dust contains a large amount of alkali in addition to chloride therefore, if CBS dust is used for secondary concrete products that use high amounts of mixed materials without rebars, it will be found that it can be used effectively for enhancing strength by active alkali.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.507-511
• /
• 1995

Catalytic chlorination of chlorobenzene was studied in vapor phase using various solid-acid catalysts such as silica-alumina, alumina, zeolite and a modified clay prepared by impregnating bentonite with ferric chloride. The conversions of both chlorine gas and chlorobenzene showed high over silica-alumina, alumina and modified clay catalysts. However relatively large amounts of polychlorinated benzene derivatives were also observed. The active species of catalytic activity in chlorination of chlorobenzene in vapor phase were proved to be as Lewis acid sites by in-situ IR experiments. The strength of Lewis acid sites which were effective for the vapor-phase chlorination seemed to be having Hammett acidity Ho >-3.0. The selectivity to dichlorobenzenes was proved to be high over the zeolite catalyst due to their shape-selective properties. p-Dichlorobenzene or dichlorobenzene selectivities were improved more or less by changing the reaction conditions.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.2
• /
• pp.219-225
• /
• 2017

An aqueous chlorine dioxide ($ClO_2$) treatment combined with highly activated calcium oxide (CaO) and mild heat was tested for inactivating naturally existing bacteria and Escherichia coli O157:H7 inoculated on fresh-cut kale. Kale samples were treated with different concentrations of $ClO_2$ (10, 30, and 50 ppm), CaO (0.01%, 0.05%, 0.1%, and 0.2%), and mild heat ($25^{\circ}C$, $45^{\circ}C$, $55^{\circ}C$, and $65^{\circ}C$) as well with combinations of 30 or 50 ppm $ClO_2$ and 0.2% CaO at $55^{\circ}C$ for 3 min. An increasing concentration of $ClO_2$ and CaO significantly reduced the microbial population compared with the control. In addition, mild heating at $55^{\circ}C$ elicited greater microbial reduction than the other temperatures. A combined treatment of 50 ppm $ClO_2$ and 0.2% CaO at $55^{\circ}C$ reduced the population of naturally existing bacteria on kale by 3.10 log colony forming units (CFU)/g, and the counts of E. coli O157:H7 were below the detection limit (1 log CFU/g). In addition, no significant differences in the Hunter color values were evident in any treatment during storage. Therefore, a combined treatment of $ClO_2$ and active CaO at $55^{\circ}C$ can be an effective sanitizing method to improve the microbiological safety of fresh-cut kale without affecting its quality.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1998.06a
• /
• pp.135-153
• /
• 1998

Nanofiltration (NF) is a recently introduced term in membrane separation. In 1988, Eriksson was one of the first authors using the word 'nanofiltration' explicitly. Some years before, FilmTech started to use this term for their NF50 membrane which was supposed to be a very loose reverse osmosis membrane or a very tight ultrafiltration membrane. Since then, this term has been introduced to indicate a specific boundary of membrane technology in between ultrafiltration and reverse osmosis. The application fields of the NF membranes are very broad as follows: Demeneralizing water, Cleaning up contaminated groundwater, Ultrapure water production, Treatment of effleunts containing heavy metals, Offshore oil platforms, Yeast production, Pulp and paper mills, Textile production, Electroless copper plating, Cheese whey production, Cyclodextrin production, Lactose production. The earliest NF membrane was made by Cadotte et al, using piperazine and trimesoyl chloride as monomers for the formation of polyamide active layer of the composite type membrane. They coated very thin interfacially potymerized polyamide on the surface of the microporous polysulfone supports. The NF membrane exhibited low rejections for monovalent anions (chloride) and high rejections for bivalent anions (sulphate). This membrane was called NS300. Some of the earliest NF membranes, like the NF40 membrane of FilmTech, the NTR7250 of Nitto-Denko and the UTC20 and UTC60 of Toray, are formed by a comparable synthesis route as the NS300 membrane. Commercially available NF membranes nowadays are as follows: ASP35 (Advanced Membrane Technology), MPF21; MPF32 (Kiryat Weizmann), UTC20; UTC60; UTC70; UTC90 (Toray), CTA-LP; TFCS (Fluid Systems), NF45; NF70 (FilmTec), BQ01; MX07; HG01; HG19; SX01; SX10 (Osmonics), 8040-LSY-PVDI (Hydranautics), NF CA30; NF PES 10 (Hoechst), WFN0505 (Stork Friesland). The typical ones among the commercially available NF membranes are polyamide composite membrane consisting of interfacially polymerized polyamide active layer and microporous support. While showing high water fluxes and high rejections of multivalent ions and small organic molecules, these membranes have relatively low chemical stability. These membranes have low chlorine tolerance and are unstable in acid or base solution. This chemical instability is appearing to be a big obstacle for their applications. To improve the chemical stability, we have tried, in this study, to prepare chemically stable NF membranes from PVA. The ionomers and interfacially polymerized polyamide were used for the modification of'the PVA membranes. For the detail study of the active layer, homogeneous NF membranes made only from active layer materials were prepared and for the high performance, composite type NF membranes were prepared by coating the active layer materials on microporous polysulfone supports.

• Journal of Nutrition and Health
• /
• v.17 no.4
• /
• pp.273-280
• /
• 1984

The blood components of diabetic patients who visited S- hospital in seoul from January 1982 to June 1983 were compared with the reference levels. Hemoglobin and hematocrit levels of diabetic patients were significantly lower than the reference. The diabetic patients showed 2-3 times higher levels of fasting blood glucose and postprandial -2 hours blood sugar. Levels of blood urine nitrogen and creatine were also significantly higher in the diabetes mellitus and the levels of potassium sodium and chlorine showed no differences although these were decreased gradually in older patients. Lower serum calcium levels were seen in the diabetic patients and this change was more significant at the ages higher than 40. The effect of an active vitamin D on serum-Ca level in diabetic patients was studied in comparison to that of non- diabetic persons. The serum calcium levels were slightly increased in control and insulin- dependent diabetic patients after a week- intake of 1,000mg calcium a day, while the intake of 1,25-dihydroxycholecalciferol ( 1,000 IU per day ) did not increase the serum calcium levels of these groups. Insulin - independent diabetic patients showed the rather lower serum calcium levels after a week- intake of 1,000mg calcium per day. However, the levels were increased after 2-weeks intake of the calcium and a week-in-take of the active vitamin D(1,000 IU/day ). This effect of vitamin D was seen in the groups with lower intake of calcium(500mg/day ) but not in the groups with 1,000mg calcium intake a day.