• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.253-254
• /
• 2009

본 연구는 다결정 알루미나 소결체와 사파이어웨이퍼(sapphire wafer)의 견고한 접합을 위해 활성금속 Ti가 함유된 Active Filler Metal을 사용하였고, 이를 브레이징한 후 접합 반응층과 Ti 거동 특성에 관한 것이다. 브레이징 (brazing)은 Ar 분위기 종에 $850^{\circ}C$에서 이행하였으며. 이때 다결정 알루미나, 사파이어와 Active Filler Metal 사이의 접합 반응층을 확인하였다. Active Filler Metal 내어| 존재하는 Ti가 접할 반응층의 양계면에 집중되는 것을 SEM을 이용하여 확인하였다. 또한 EDS Line Scanning을 실시하여 접합부에서 원소들의 분포를 관찰하였다.

• Applied Chemistry for Engineering
• /
• v.8 no.6
• /
• pp.1048-1053
• /
• 1997

Modified mordenites by HF treatement, which have different $SiO_2/Al_2O_3$ ratio, and those mixed with $\gamma$-alumina are prepared and used for catalytic cracking of triphenylmethane(TPM) in micro-activity tester(MAT). Dealumination of mordenites decreased the acid content but developed secondary mesopores. The conversion and the selectivity of benzene over modified mordenites with the mesopores were increased. However, for the further dealuminated mordenites, they decreased due to the destruction of pore structure and low acid amount. Accordingly, the maximum cracking activity and the maximum selectivity of benzene were obtained about 17 $SiO_2/Al_2O_3$ ratio of modified mordenites. The modified mordenites mixed with alumina enhanced the cracking activity of TPM compared with the pure mordenites. It can be explained that TPM is cracked at active sites with in large pores of alumina firstly and further cracked into small molecules in zeolite pores as step mechanism of catalytic cracking.

• Korean Journal of Pharmacognosy
• /
• v.1 no.2
• /
• pp.19-22
• /
• 1970

It was found that the extracts of Sargassum thumbergii (Sargassaceae) had an anthelmintic action on Ascaris suilla and further examinations were made on the anthelmintic compounds of the seaweed. The anthelmintic principle is soluble in water, adsorbed in aqueous extract with activated carbon and eluted from the carbon with 90% aqueous methanol solution. But it is not adsorbed on alumina and amberite IR-120 (H-type). The anthelmintic fractions were prepared by the use of these properties. The active principle of Sargassum thunbergii was pharmacologically examined and was found to decrease the tenisty, tonus, mobility and amplitude of Eisenia foetida nerve muscles. The active principle was subjected to paper partition chromatography but yellow spot to ninhydrin was not revealed.

• Korean Journal of Materials Research
• /
• v.22 no.6
• /
• pp.316-320
• /
• 2012

$Co_3O_4$, $Al_2O_3$ and $Co_3O_4$/$Al_2O_3$ mesoporous powders were prepared by a sol-gel method with starting matierals of aluminum isopropoxide and cobalt (II) nitrate. A P123 template is employed as an active organic additive for improving the specific surface area of the mixed oxide by forming surfactant micelles. A transition metal cobalt oxide supported on alumina with and without P123 was tested to find the most active and selective conditions as a heterogeneous catalyst in the reaction of styrene epoxidation. A bBlock copolymer-P123 template was added to the staring materials to control physical and chemical properties. The properties of $Co_3O_4$/$Al_2O_3$ powder with and without P123 were characterized using an X-ray diffractometer (XRD), a Field-Emission Scanning Electron Microscope (FE-SEM), a Bruner-Emmertt-Teller (BET) surface analyzer, and $^{27}Al$ MAS NMR spectroscopy. Powders with and without P123 were compared in catalytic tests. The catalytic activity and selectivity were monitored by GC/MS, $^1H$, and $^{13}C$-NMR spectroscopy. The performance for the reaction of epoxidation of styrene was observed to be in the following order: [$Co_3O_4$/$Al_2O_3$ with P123-1173 K > $Co_3O_4$/$Al_2O_3$ with P123-973 K > $Co_3O_4$-973 K>$Co_3O_4$/$Al_2O_3$-973 K > $Co_3O_4$/$Al_2O_3$ with P123-1473 K > $Al_2O_3$-973 K]. The existence of ${\gamma}$-alumina and the nature of the surface morphology are related to catalytic activity.

• Applied Chemistry for Engineering
• /
• v.28 no.1
• /
• pp.87-94
• /
• 2017

In this study, a catalyst based on $Pt/Al_2O_3$ supported on Mg was prepared by a wet impregnation method to investigate the $CH_4-SCR$ reaction characteristics of various alumina supports. Alumina supported on $Pt/Al_2O_3$ catalyst was converted to an $Al_2O_3$ composite, and when Mg was added, oxygen species of the active metal Pt were controlled due to electrophobic characteristics. Oxygen-controlled Pt used as a reducing agent inhibited the oxidation of $CH_4$ to $CO_2$. The addition of Mg also promoted the adsorption of NO species and the conversion of NO to $NO_2$ due to the NOx storage property on the catalyst surface.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.81-85
• /
• 2011

$V_{0.9}Sb_{0.1}O_x$ systems, bulk and deposited on different supports (five types of $\gamma$-aluminas, $\alpha$-alumina, silica-alumina, silica gel, magnesium oxide), have been tested in the oxidative dehydrogenation (ODH) of iso-butane. Catalytic performance of VSb oxides has shown to be highly dependent on the support and the nature of the support decreasing in a series: $\gamma$-$Al_2O_3$ > $\alpha$-$Al_2O_3$ > Si-Al-O > $SiO_2$ $\approx$ MgO $\gg$ unsupported. Variation of the V-Sb-O-loading in the studied range of coverage (0.5-2 theoretical monolayer) only slightly influences the catalysts' activity and selectivity. The best catalytic performance of $\gamma$-alumina-supported $V_{0.9}Sb_{0.1}O_x$ systems can be explained by the optimal surface interaction between support and supported components resulting in the formation of well-spread amorphous active $VO_x$-component with vanadium in a high oxidation state.

• Advances in materials Research
• /
• v.12 no.4
• /
• pp.263-271
• /
• 2023

In this study, AA1060/Alumina composites were fabricated by combined stir casting and accumulative press bonding (APB). The APB process was repeated up to six press bonding steps at 300Ċ. As the novelty, potential dynamic polarization in 3.5Wt% NaCl solution was used to study the corrosion properties of these composites. The corrosion behavior of these samples was compared and studied with that of the annealed aluminum alloy 1060 and versus the number of APB steps. So, as a result of enhancing influence on the number of APB process, this experimental investigation showed a significant enhancement in the main electrochemical parameters and the inert character of the Alumina particles. Together with Reducing the active zones of the material surfaces could delay the corrosion process. Also, at higher number of steps, the corrosion resistance of composites improved. The sample produced after six number of steps had a low corrosion density in comparison with high corrosion density of annealed specimens. Also, the scanning electron microscopy (SEM), was used to study the corrosion surface of samples.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.605-609
• /
• 2005

Chemical mechanical polishing (CMP) of Ni was performed by the various ratios of four kinds of oxidizers and an addition of alumina powders as an abrasive in each slurry with the different oxidizers. Moreover, the interaction between the Ni and the each oxidizer was discussed by potentiodynamic polarization measurement, in order to compare the effects of Ni-CMP and electrochemical characteristics on the Ni with the different oxidizers. As an experimental result, the removal rate of Ni reached a maximum at 1 $vol\%$ of $H_2O_2$. Also the removal rates of Ni increased with the audition of alumina abrasives in each slurry. The potentiodynamic polarization of Ni under dynamic condition showed a significant difference in electrochemical behavior by addition of $H_2O_2$ in solutions. Ni showed the perfect passivation behavior in solution without $H_2O_2$ under potentiodynamic polarization condition, while active dissolution dominates in solution with the addition of $H_2O_2$. The results indicate that the surface chemistry and electrochemical characteristics of Ni play an important role in controlling the polishing behavior of Ni.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.4
• /
• pp.415-423
• /
• 2011

HI decomposition step certainly demand catalytic reaction for efficient production of hydrogen in SI process. Platinum catalyst can apply to HI decomposition reaction as well as hydrogenation or dehydrogenation. Generally, noble metal is used as catalyst which is loaded form for getting high dispersion and wide active area. In this study, Pt was loaded onto zirconia, ceria, alumina, and silica by impregnation method. HI decomposition reaction was carried out under the condition of $450^{\circ}C$, 1atm, and $167.76h^{-1}$ (WHSV) in a fixed bed reactor for measuring catalytic activity. And property of a catalyst was observed by BET, TEM, XRD and chemisoption analysis. On the basis of experimental results, we discussed about conversion of HI according to physical properties of the loaded Pt catalyst onto each support.

• Journal of the Korean institute of surface engineering
• /
• v.23 no.2
• /
• pp.30-38
• /
• 1990

For the purpose of suggesting the thermal resistant catalyst for automobile emission control, various catalysts, Pd-WO3 and PD-La2O3 systems, were charactrized before and after thermal aging. It was found that La2O3 formed amorphous surface compound on the support by strong metal-support interaction(SMSI). And by Temperature Programmed Desorption (TPD) expeiment, it was found that the distribution of acid site which is strong acid sites by adding the promoters. After thermal aging, it was observed that the acidity of Pd-WO3 system was decreased largely because of losing acid site by metal vaporization. On the other hand, there was pretty small change in the properties of matter of Pd-La2O3 system. Therefore, it could be considered that La2O3 formed heat resisting amorphous surface compound on the support by SMSI.