• 전기학회논문지
• /
• 제59권10호
• /
• pp.1917-1922
• /
• 2010

Near-Field Communication (NFC) is a short-range wireless communication technology evolved from RFID especially for the exchange of data between active and passive devices. This paper presents the mathematical models for the signal path of a NFC transceiver system and a behavioral simulation platform using MATLAB simulink. The approximated mathematical models simplify the simulation complexity of a transceiver and provide a quick evaluation. With this calculation platform, we can evaluate the system performance caused by the noise and the non-linearity of the individual blocks, and caused by system variables such as Effective Number of Bits (ENOB) of ADC and filter cutoff frequency. This platform provides us with a rapid prototyping, a reliable system design, and an efficient risk management during development of the NFC transceiver ICs.

• 한국재료학회지
• /
• 제22권12호
• /
• pp.717-721
• /
• 2012

Manganese dioxide ($MnO_2$) is one of the most important cathode materials used in both aqueous and non-aqueous batteries. The $MnO_2$ polymorph that is used for lithium primary batteries is synthesized either by electrolytic (EMD-$MnO_2$) or chemical methods (CMD-$MnO_2$). Commonly, electrolytic manganese dioxide (EMD) is used as a cathode mixture material for dry-cell batteries, such as a alkaline batteries, zinc-carbon batteries, rechargeable alkaline batteries, etc. The characteristics of lithium/manganese-dioxide primary cells fabricated with EMD-$MnO_2$ powders as cathode were compared as a function of the parameters of a manufacturing process. The flexible primary cells were prepared with EMD-$MnO_2$, active carbon, and poly vinylidene fluoride (PVDF) binder (10 wt.%) coated on an Al foil substrate. A cathode sheet with micro-porous showed a higher discharge capacity than a cathode sheet compacted by a press process. As the amount of EMD-$MnO_2$ increased, the electrical conductivity decreased and the electrical capacity increased. The cell subjected to heat-treatment at $200^{\circ}C$ for 1 hr showed a high discharge capacity. The flexible primary cell made using the optimum conditions showed a capacity and an average voltage of 220 mAh/g and 2.8 V, respectively, at $437.5{\mu}A$.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권4호
• /
• pp.228-235
• /
• 2007

The main purpose of this paper is to manage the container property effectively at the container yard by applying the RTLS technology to the field of port logistics. Yet, many kinds of noises happen to be inputted with the distance value(between the reader and the tag) which is to be inputted into the location identification algorithm, which makes the distance value jumped due to the system noise of the ultrasonic sensor module and the measurement noise. The Kalman Filter is widely used to prevent this jump occurrence; the noises are eliminated by using the EKF(Extended Kalman Filter) while considering that the distance information of the ultrasonic sensor is non-linear. Also, the 3D RTLS system at the port container yard suggested in this research is designed not to be interrupted for its ultrasonic transmission by positioning the antenna at the front of each sector of the container where the active tags are installed. We positioned the readers, which function as antennas for location identification, to four places randomly in the absolute coordinate and let the positions of the active tags identified by using the distance data delivered from the active tags. For the location identification algorithm used in this paper, the triangulation measurement that is most used in general is applied and newly reorganized to calculate the position of the container. In the first experiment, we dealt with the error resulting in the angle and the distance of the ultrasonic sensor module, which is the most important in the hardware performance; in the second, we evaluated the performance of the location identification algorithm, which is the most important in the software performance, and tested the noise cancellation effects for the EKF. According to the experiment result, the ultrasonic sensor showed an average of 3 to 5cm error up to $45^{\circ}$ in case of $60^{\circ}$ or more, non-reliable linear distances were obtained. In addition, the evaluation of the algorithm performance showed an average of $4^{\circ}{\sim}5^{\circ}$ error due to the error of the linear distance-this error is negligible for most container location identifications. Lastly, the experiment results of noise cancellation and jump preservation by using the EKF showed that noises were removed in the distance information which was entered from the input of the ultrasonic sensor and as a result, only signal was extracted; thus, jumps were able to be removed and the exact distance information between the ultrasonic sensors could be obtained.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.470-470
• /
• 2013

Recently, active materials such as amorphous silicon (a-Si), poly crystalline silicon (poly-Si), transition metal oxide semiconductors (TMO), and organic semiconductors have been demonstrated for flexible electronics. In order to apply flexible devices on the polymer substrates, all layers should require the characteristic of flexibility as well as the low temperature process. Especially, pentacene thin film transistors (TFTs) have been investigated for probable use in low-cost, large-area, flexible electronic applications such as radio frequency identification (RFID) tags, smart cards, display backplane driver circuits, and sensors. Since pentacene TFTs were studied, their electrical characteristics with varying single variable such as strain, humidity, and temperature have been reported by various groups, which must preferentially be performed in the flexible electronics. For example, the channel mobility of pentacene organic TFTs mainly led to change in device performance under mechanical deformation. While some electrical characteristics like carrier mobility and concentration of organic TFTs were significantly changed at the different temperature. However, there is no study concerning multivariable. Devices actually worked in many different kinds of the environment such as thermal, light, mechanical bending, humidity and various gases. For commercialization, not fewer than two variables of mechanism analysis have to be investigated. Analyzing the phenomenon of shifted characteristics under the change of multivariable may be able to be the importance with developing improved dielectric and encapsulation layer materials. In this study, we have fabricated flexible pentacene TFTs on polymer substrates and observed electrical characteristics of pentacene TFTs exposed to tensile and compressive strains at the different values of temperature like room temperature (RT), 40, 50, $60^{\circ}C$. Effects of bending and heating on the device performance of pentacene TFT will be discussed in detail.

• 한국축산시설환경학회지
• /
• 제8권2호
• /
• pp.63-72
• /
• 2002

In Korea, a need of automatic dairy farm management system has been increased to lower production cost and to strengthen international competition. However, the present management system was mostly relied on foreign technologies and caused some problems in post management and after-sales services. Therefore, though there is a problem of price and quality at present, domestic technologies of the management system should be developed for the long run. This study was conducted to develop an electronic identification unit for an automatic dairy farm management system. The developed system was consisted of a tag, a reader, a switching circuit, and a personal computer. The tag attachable to each individual cow was developed to transmit individual radio frequency(RF) code into the air with modulation of ASK(amplitude shift keying). And the switching circuit was added to avoid confusion on reception and transmittance. The reader attached to a feeding device was developed to transmit activating signal periodically and to identify code of the individual tag when the tag was approached to the device. The reader was consisted of an active filter, a detecter, a comparator and a microcontroller. The test result was feasible enough to apply it for the automatic farm management system and the identified maximum distance was about 37cm.

• 시큐리티연구
• /
• 제21호
• /
• pp.75-94
• /
• 2009

기계경비시스템은 대부분 전자 정보 통신기기로 구성되기 때문에 사회전반적인 환경, 범죄동향적인 환경적인 면에서 기계경비시스템 등에 영향을 미치게 되며 RFID의 무선인식과 추적기능은 사람 또는 차량의 출입통제나 반입, 감시, 통제 등을 위해 유용하게 쓰여질 부분으로 사회전반적인 환경 즉 고령화사회에 맞는 실버를 위한 케어 및 여성의 사회진출이 늘어가고 동시에 흉악범죄의 증가로 인한 첨단 도난방지기계시스템의 본격화 할 것으로 그 중요성은 더해가고 있다. 유비쿼터스 센서 네트워크의 이론적인 고찰을 알아보고, 기술 및 응용분야를 중점을 두고 향후 시큐리티업체의 발전적인 방향을 제시하는 것을 연구 목적으로 두고 있다. 시큐리티업체의 새로운 환경에 대응전략 제시를 한다면, 첫째, 시큐리티업체의 다각화 전략이 요구된다. 자율시장 경쟁의 원칙에 의하여 높은 수준의 시큐리티업체만 시장에 생존함으로써 시큐리티 시장의 질적 성장과 경쟁력을 가져올 것이다. 둘째, 시큐리티업체의 적극적 홍보가 요구된다. 현대사회를 살아가는 우리의 광고와 선전의 홍수에 묻혀 살고 있다해도 과언이 아니다. 시큐리티업체에 대한 국민들의 의식전환을 위해 대중매체를 이용하여 시큐리티의 활동영역이나 중요성을 강조하는 홍보활동을 활발하게 전개해야하며 최근에는 영화나 드라마에서도 시큐리티요원의 활동을 소재로 삼을 만큼 국민들에게 가깝게 부각되고 있는 점을 잘 활용하여 시큐리티의 공공적 측면을 함께 강조하는 홍보활동을 병행하는 방안을 강구해야한다. 셋째, 유비쿼터스 센서네트워크와 전자태그의 기술적 보안적 구축이 요구된다. U-Home, U-Health Care 등 모바일 전자태그서비스를 이용하기 때문에 모바일 전자태그 단말기의 상용화 지원, 통신요금 및 정보이용료 인하, 지속적인 기술개발 및 프라이버시 보호 강화하기 위해 기존 프라이버시 가이드라인을 기반으로 안전한 유비쿼터스 센서네트워크 안에 전자태그 환경을 조성하여 우리 생활 전반에 이용되며, 이러한 부분은 학계, 민간 연구소 등 산 학 연 협력체계를 구축해야 할 것이다.