• 전력전자학회논문지
• /
• 제27권5호
• /
• pp.384-390
• /
• 2022

In this study, a single-stage, four-phase, interleaved, totem-pole AC-DC converter is proposed for a super-fast charger station that requires high power, a wide voltage range, and bidirectional operation capabilities and adopts various types of electric transport vehicles. The proposed topology is based on current-fed push-pull dual active bridge converter combined with the totem-pole operation. Owing to the four-phase interleaving effect, the bridge on the grid side can switch at 0.25, 0.5, and 0.75 to achieve a ripple-free grid current. The input filter can be removed theoretically. Switching methods for the duty of the secondary-side duty cycle are proposed, and they correspond to the primary duty cycle for reducing the circulating power and handling the total harmonic distortion. Therefore, the converter can operate under a wide voltage range. Experimental results from a 7.5 kW prototype are used to validate the proposed concept.

• 전기전자학회논문지
• /
• 제28권2호
• /
• pp.228-233
• /
• 2024

근래의 코로나 시대로 인해 접촉에 의한 감염을 방지하기 위해 다양한 방법들을 강구하고 있다. 그중 생활 속에서 많은 접촉이 일어나고 있는 엘리베이터에서의 감염 방지를 위해 비접촉 버튼을 개발하였다. 본 연구에서는 능동 차폐(active shield) 방식의 정전용량(capacitance) 센서를 이용하여 손가락이 접근했을 때의 커패시턴스 변화를 감지한다. 정전 전력 소모(static power consumption)가 없으며, 아날로그 멀티플렉서를 사용하여 일정 시간마다 돌아가면서 버튼을 센싱 하는 방식을 사용하여 상대적으로 가격이 비싼 센서칩을 하나만 사용하였다. 엘리베이터 버튼뿐만 아니라 터치 버튼, 자동문 등 일상에서 많은 사람들이 접촉하는 버튼을 높은 비용 추가 없이 대체 가능하다.

• 한국정보통신학회논문지
• /
• 제13권1호
• /
• pp.6-16
• /
• 2009

V/UHF대 방향 탐지(DF)용에 적용하기 위하여 9개의 다이폴 소자로 구성된 원형배열 안테나를 연구하였다. 배열 안테나의 전체 크기를 줄이기 위하여 소자는 top-hat 다이폴 형태를 이용하였다. 20-1,300Mhz인 매우 넓은 주파수 범위에서 동작하기 위하여 각 다이폴 소자의 팔(arm)의 중간에 pin diode를 삽입하였다. 이런 형태의 다이폴을 이용하므로 pin diode의 on/off에 따라 다이폴의 실효 길이를 증감할 수 있다. 능동 배열 안테나는 평형 푸시풀 증폭기와 직접 연결되게 설계하므로 수신 감도를 개선할 뿐만 아니라 발룬 역할을 하였다. 그리고 능동 배열 안테나를 설계 및 제작하였고, 측정 결과를 계산 결과와 비교하여 제시하였다.

• Earthquakes and Structures
• /
• 제8권3호
• /
• pp.619-637
• /
• 2015

A field based non-destructive hardness method is being developed to determine plastic strain in steel elements subjected to seismic loading. The focus of this study is on the active links of eccentrically braced frames (EBFs). The 2010/2011 Christchurch earthquake series, especially the very intense February 22 shaking, which was the first earthquake worldwide to push complete EBF systems into their inelastic state, generating a moderate to high level of plastic strain in EBF active links for a range of buildings from 3 to 23 storeys in height. Plastic deformation was confined to the active links. This raised two important questions: what was the extent of plastic deformation and what effect does that have on post-earthquake steel properties? A non-destructive hardness test method is being used to determine a relationship between hardness and plastic strain in active link beams. Active links from the earthquake affected, 23-storey Pacific Tower building in Christchurch are being analysed in the field and laboratory. Test results to date show clear evidence that this method is able to give a good relationship between plastic strain and demand. This paper presents significant findings from this project to investigate the relationship between hardness and plastic strain that warrant publication prior to the completion of the project. Principal of these is the discovery that hot rolled steel beams carry manufacturing induced plastic strains, in regions of the webs, of up to 5%.

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.236-241
• /
• 2017

This paper presents a single-phase grid connected voltage-ed inverter with a power decoupling circuit. In the single-phase grid connected voltage-ed inverter, it is well known that a power pulsation with twice the grid frequency is contained in the input power. In a conventional voltage type inverter, electrolytic capacitors with large capacitance have been used in order to smooth the DC voltage. However, lifetime of those capacitors is shortened by the power pulsation with twice grid frequency. The authors have been studied a active power decoupling(APD) method that reduce the pulsating power on the input DC bus line, this enables to transfer the ripple energy appeared on the input DC capacitors into the energy in a small film capacitor on the additional circuit. Hence, extension of the lifetime of the inverter can be expected because the small film capacitor substitutes for the large electrolytic capacitors. Finally, simulation and experimental results are discussed.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.55-55
• /
• 2016

본 논문에서는 능동 클램프 회로를 적용한 전류 유입형 푸쉬풀 저전압 컨버터를 제안한다. 1차측에는 공통의 클램핑 커패시터를 사용하였으며 2차측에는 L-C 직렬 공진형 풀브릿지 정류기를 사용하였다. 1차측의 클램핑 커패시터는 변압기의 누설 인덕턴스 성분과 스위치의 기생 커패시터 성분의 공진으로 발생하는 링잉 현상을 완화시켰다. 제안된 능동 클램핑 회로는 효율은 200W에서 97.06%로 나타났으며 PSIM으로 시뮬레이션을 통하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.342-343
• /
• 2011

본 논문에서는 친환경 자동차, UPS 시스템 등 배터리와 같은 에너지 저장장치의 충 방전을 위한 3상 양방향 DC-DC 컨버터를 제안한다. 제안하는 컨버터는 PWM+위상제어방식으로 동작하고 모든 스위치 ZVS 턴온을 성취하며 기존 위상제어 컨버터와 PWM 푸시풀 컨버터보다 낮은 전류정격을 갖는 특징이 있다. 기존 컨버터와 비교하여 이론적 분석을 제시하였고 시작품을 통해 타당성 및 성능을 검증하였다.

• 전자공학회논문지C
• /
• 제34C권10호
• /
• pp.19-26
• /
• 1997

Novel class AB CMOS second-generation current conveyors (CCII) using 0.6.mu.m n-well CMOS process for high-frequency current-mode signal processing were developed. The CCII for low power operation consists of a class AB push-pull stage for the current input, a complementary source follower for the voltage input, and a cascode current mirror for the current output. In this architecture, the two input stages are coupled by current mirrors to reduce the current input impedance. Measurements of the fabricated CCII show that the current input impedance is 875.ohm. and the bandwidth of flat gain when used as a voltage amplifier extends beyond 4MHz. The power dissipation is 1.25mW and the active chip area is 0.2*0.15[mm$\^$2/].

• 한국식품영양학회지
• /
• 제16권3호
• /
• pp.224-231
• /
• 2003

The development of food science in the near future probably depends on the advance in functional food science. Actually, a number of substances and products with potential for disease risk reduction rather than simply for health maintenance have been investigated for their body-modulating functions. Some of them have been applied in practice to the industrialization of functional foods in terms of foods for health uses. Health is becoming a more important aspect of food. Consumers increasingly see the link between food and health, thus generating growing levels of consumer interest in more actively managing their diets and, by implication, their health. there is demand from consumers and strong manufacturer push towards the development of food as medicine. Pharmaceutical companies are currently focused on the medical aspects of food as medicine, but it is expected that there will be an increase in the rate of active ingredients for lifestyle application.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.77-85
• /
• 2009

With the advent of power semiconductor switching devices, power electronics relating to high frequency electromagnetic eddy current based induction heating technology have become more suitable and acceptable. This paper presents high-frequency induction heating cooking appliance circuit based on the zero current switching-PWM single ended push-pull(ZCS-PWM SEPP) resonant inverter added AC-DC converter. This inverter uses pulse-width-modulation(PWM) control method with active auxiliary quasi-resonant lossless inductor snubbers and a switched capacitor. To improved the transient performance, the PI controller is applied for this system. For the systematic parameter optimization of the PI controller, the gradient-based optimization algorithm is applied. The performance of optimized parameters is evaluated using simulation and experimental test. These results show that the proposed systematic optimal tuning method improve the transient performances of this system.